[Iperf-users] iperf 2.1.9 release candidate

[Bob M. <bob...@br...>]

Hi All,

The iperf 2.1.9 release candidate
<https://sourceforge.net/p/iperf2/code/ci/master/tree/> is out. If
possible, please test and report bugs
<https://sourceforge.net/p/iperf2/tickets/>.

Thanks,
Bob

2.1.9 (as of February 13th, 2023)
------------------------------
o --bounceback officially supported (including Windows) for
repsonsiveness test scenarios
o deprecated --bounceback-congest introduced in 2.1.8 with --working-loads
o --working-loads supports is generalized; works with --bounce-back,
--connect-only & --burst-period
o default TCP_NOTSENT_LOWAT with the --working-loads concurrent traffic
o add support for GMT time formatting via --utc option
o --trip-times will auto set TCP_NOTSENT_LOWAT
o CSV output fixes for reverse
o CSV output regressions fixed per sum outputs using negative transfer ids
o CSV output support with --enhanced
o Fix to isoch wait_tick with Windows
o fix support for --txstart-time with --bounceback
o Add support for summing histograms in histogram sum outputs
o Multiple sum report fixes per threading where needing mutex protections
o Jitter packet IPG calcluations ignore inter frame gaps
o Isoch jitter output to use running value vs sampled value
o Add support for --jitter-histograms
o man page content updates
o output isoch scheduling errors at end of isoch run
o PRIdMAX fix for ARM systems
o better work around in isochronous with Windows per early return of
WaitForSingleObject()
o fix SO_BINDTODEVICE regression
o fix v6 source port parsing with -B and brackets
o fix malloc error with --hideips
o fixes for rate limited TCP with --trip-times
o add support for TCL_NOTSENT_LOWAT with rate limited TCP
o permit key now supports -P using listen() with a backlog, no longer
single threaded limit
o fixes for zero valued permit-key
o fixes for multiple permit-key regressions
o fix token bucket delay wiht TCP await write
o fix isMulticast test for ipv4 - previous logic indicate true for
240.x.x.x which is not multicast
o fix regression on jitter calc - starts on second transit time
o add cmsg for loop with UDP rx timestamp, cmsg processing best to use
loop w/test
o use stdout and exit(0) for -h and -v (vs stderr and exit(1))
o add python facetime scripts
o Fix single thread compile breakage
o fix windows cross compile
o multiple spelling error fixes in comments and man page

-- 
This electronic communication and the information and any files transmitted 
with it, or attached to it, are confidential and are intended solely for 
the use of the individual or entity to whom it is addressed and may contain 
information that is confidential, legally privileged, protected by privacy 
laws, or otherwise restricted from disclosure to anyone else. If you are 
not the intended recipient or the person responsible for delivering the 
e-mail to the intended recipient, you are hereby notified that any use, 
copying, distributing, dissemination, forwarding, printing, or copying of 
this e-mail is strictly prohibited. If you received this e-mail in error, 
please return the e-mail to the sender, delete it from your computer, and 
destroy any printed copy of it.