From: Ming Z. <mi...@el...> - 2005-03-10 17:04:58
|
I would like to resubmit the patch. Only some comments are added. At least we have one successful case. :) Ming On Wed, 2005-03-09 at 19:46, Steve Adams wrote: > That works! > > > > ----- Original Message ----- > From: "Ming Zhang" <mi...@el...> > To: "Steve Adams" <stv...@ba...> > Sent: Wednesday, March 09, 2005 3:50 PM > Subject: Re: [Iometer-user] Startup State of Iometer > > > > On Wed, 2005-03-09 at 17:27, Steve Adams wrote: > > > I'm running the new iometer.exe on a Windows 2003 Server machine. I am > not > > > using the new dynamos you sent since this seems to be an Iometer-only > > > function. The command line I use to start iometer is > > > > > > iometer_new /c sr.icf /r out.csv /t 30 /m > > try iometer_new /c sr.icf /r out.csv /t 30 /m 1 > > > > > > > > > > There are two dynamos one in Windows machine D2 and one in Windows > machine > > > D3. I've attached the icf file. The machines are connected over GigE. > > > > > > ----- Original Message ----- > > > From: "Ming Zhang" <mi...@el...> > > > To: "Steve Adams" <stv...@ba...> > > > Sent: Wednesday, March 09, 2005 2:15 PM > > > Subject: Re: [Iometer-user] Startup State of Iometer > > > > > > > > > > On Wed, 2005-03-09 at 17:06, Steve Adams wrote: > > > > > Ming, > > > > > > > > > > Adding the /m parameter at the end of the command line breaks > iometer > > > here. > > > > > I get a beep from the computer and iometer fails to start up. Just > > > removing > > > > > the /m lets Iometer start up fine. > > > > > > > > can u provide more information like the exact command line u use to > > > > invoke iometer? linux dynamo or windows dynamo? system configuration? > > > > .icf file if possible. and etc... > > > > > > > > i can not debug it if all the information is that i said workable and > u > > > > said fail. > > > > > > > > ming > > > > > > > > > > > > > > Steve > > > > > > > > > > > > > > > ----- Original Message ----- > > > > > From: "Ming Zhang" <mi...@el...> > > > > > To: "Steve Adams" <stv...@ba...> > > > > > Sent: Tuesday, March 08, 2005 6:34 PM > > > > > Subject: Re: [Iometer-user] Startup State of Iometer > > > > > > > > > > > > > > > > On Tue, 2005-03-08 at 17:18, Steve Adams wrote: > > > > > > > Ming, > > > > > > > > > > > > > > I don't see that the new iometer works any differently than the > > > > > original. > > > > > > > Here's how I test: > > > > > > > > > > > > > > 1. From Windows 2003 I run a batch file that executes: > > > > > > > iometer sr.icf out.csv 30 > > > > > > > > > > > > > > where sr.icf was saved after the clients had logged in, > the > > > tests > > > > > were > > > > > > > started, and the big speedometer was opened on total MB/s. > > > > > > > > > > > > > > 2. When I run this batch file, it waits for me to log in the > > > clients > > > > > and > > > > > > > then starts the tests automatically that are specified in > sr.icf. > > > What > > > > > I > > > > > > > would like is for the big speedometerto also open up, since it > was > > > open > > > > > > > when I saved the icf, but it doesn't reopen automatically, with > the > > > > > > > original code or with the new iometer you sent. To test your > new > > > > > version I > > > > > > > put it in the same directory with the name iometer_new.exe and > > > changed > > > > > the > > > > > > > batch file to iometer_new sr.icf out.csv 30. Then I resaved > sr.icf > > > with > > > > > the > > > > > > > big speedometer open. But the big speedometer doesn't open when > I > > > run > > > > > the > > > > > > > batch and log in the clients. > > > > > > > > > > > > > i am sorry that i might not explain this clearly. i did not > modify > > > the > > > > > > .icf file or results file. this will break something else. > > > > > > > > > > > > what i did was that i added a command switch /m that will let > iometer > > > > > > open the bigmeter. so pls run iometer.exe /? to see that switch > and > > > use > > > > > > it when u need the meter. > > > > > > > > > > > > ming > > > > > > > > > > > > > Steve > > > > > > > > > > > > > > > > > > > > > > > > > > > > ----- Original Message ----- > > > > > > > From: "Ming Zhang" <mi...@el...> > > > > > > > To: "Steve Adams" <stv...@ba...> > > > > > > > Sent: Monday, March 07, 2005 6:16 PM > > > > > > > Subject: Re: [Iometer-user] Startup State of Iometer > > > > > > > > > > > > > > > > > > > > > > there is a Iometer.dsw, but it looks like i broke it > yesterday by > > > > > > > > running dos2unix *.*. > > > > > > > > > > > > > > > > anyway, send u a binary copy. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ming > > > > > > > > > > > > > > > > On Mon, 2005-03-07 at 20:49, Steve Adams wrote: > > > > > > > > > Yes, I'm a windows guy. Since there's no .dsw file I > assume > > > you > > > > > didn't > > > > > > > set > > > > > > > > > this up as a nice VC project folder so I tried compiling > with > > > > > "build" > > > > > > > but > > > > > > > > > get the error: " jvc not recognized command." > > > > > > > > > > > > > > > > > > This would be sooooooo much easier if you could just > compile > > > it > > > > > there > > > > > > > and > > > > > > > > > send me an iometer .exe. > > > > > > > > > > > > > > > > > > Steve > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ----- Original Message ----- > > > > > > > > > From: "Ming Zhang" <mi...@el...> > > > > > > > > > To: "Steve Adams" <stv...@ba...> > > > > > > > > > Sent: Monday, March 07, 2005 4:43 PM > > > > > > > > > Subject: Re: [Iometer-user] Startup State of Iometer > > > > > > > > > > > > > > > > > > > > > > > > > > > > :P I guess u are a window guy. > > > > > > > > > > so send u a complete copy. uncompress it. hope u have VC > to > > > > > compile > > > > > > > it. > > > > > > > > > > if not, let me know. i give u a compiled binary. > > > > > > > > > > > > > > > > > > > > ming > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Mon, 2005-03-07 at 19:33, Steve Adams wrote: > > > > > > > > > > > Ming, > > > > > > > > > > > > > > > > > > > > > > Thanks for the code, but I'll need a little more help > > > adding it > > > > > in. > > > > > > > I > > > > > > > > > > > haven't patched the Iometer code before so exactly what > do > > > I do > > > > > > > with > > > > > > > > > the > > > > > > > > > > > .patch and .md5 code you sent to make it part of my > iometer > > > > > .exe? > > > > > > > > > > > > > > > > > > > > > > Steve > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ----- Original Message ----- > > > > > > > > > > > From: "Ming Zhang" <mi...@el...> > > > > > > > > > > > To: "Steve Adams" <stv...@ba...> > > > > > > > > > > > Cc: "Iometer mailing list" > > > <iom...@li...> > > > > > > > > > > > Sent: Sunday, March 06, 2005 1:44 PM > > > > > > > > > > > Subject: Re: [Iometer-user] Startup State of Iometer > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > forgot to say that pls give us the feedback. Thanks. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > if it is ok, Daniel, pls consider to merge. thx > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Ming > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Sun, 2005-03-06 at 16:42, Ming Zhang wrote: > > > > > > > > > > > > > here u go. see if it works. i tested it ok with > windows > > > > > 2003 > > > > > > > and > > > > > > > > > visual > > > > > > > > > > > > > c++ 6. > > > > > > > > > > > > > > > > > > > > > > > > > > patch it on top of current cvs code. if u have > problem > > > to > > > > > > > patch, > > > > > > > > > try to > > > > > > > > > > > > > do a "dos2unix *.*" first. > > > > > > > > > > > > > > > > > > > > > > > > > > run iometer.exe /? to see the new /m switch. > > > > > > > > > > > > > > > > > > > > > > > > > > ming > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Fri, 2005-03-04 at 16:54, Ming Zhang wrote: > > > > > > > > > > > > > > ic. if i have time this weekend, i will work on > it. > > > but i > > > > > am > > > > > > > not > > > > > > > > > > > sure. > > > > > > > > > > > > > > > > > > > > > > > > > > > > ming > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Fri, 2005-03-04 at 16:46, Steve Adams wrote: > > > > > > > > > > > > > > > When you start Iometer from a command line, as > soon > > > as > > > > > the > > > > > > > > > clients > > > > > > > > > > > log in > > > > > > > > > > > > > > > the tests start automatically. If you then > open up > > > the > > > > > > > > > Speedometer > > > > > > > > > > > it > > > > > > > > > > > > > > > shows the current activity. I would like to > execute > > > the > > > > > > > command > > > > > > > > > > > line and > > > > > > > > > > > > > > > when I log in the clients, everything starts > up, > > > with > > > > > the > > > > > > > > > > > Speedometer open > > > > > > > > > > > > > > > and showing performance. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Steve > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ----- Original Message ----- > > > > > > > > > > > > > > > From: "Ming Zhang" <mi...@el...> > > > > > > > > > > > > > > > To: "Steve Adams" <stv...@ba...> > > > > > > > > > > > > > > > Cc: "Iometer mailing list" > > > > > > > <iom...@li...> > > > > > > > > > > > > > > > Sent: Friday, March 04, 2005 1:40 PM > > > > > > > > > > > > > > > Subject: Re: [Iometer-user] Startup State of > > > Iometer > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > currently no. if that is opened, what is > > > displayed > > > > > there? > > > > > > > > > last > > > > > > > > > > > time > > > > > > > > > > > > > > > > result? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ming > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Fri, 2005-03-04 at 16:34, Steve Adams > wrote: > > > > > > > > > > > > > > > > > I notice that when you start Iometer from a > > > command > > > > > > > line > > > > > > > > > that > > > > > > > > > > > the > > > > > > > > > > > > > > > > > Results Display Speedometer is not > displayed, > > > even > > > > > > > though > > > > > > > > > it > > > > > > > > > > > was open > > > > > > > > > > > > > > > > > when the icf file being called was saved. > Is > > > there > > > > > a > > > > > > > way > > > > > > > > > to > > > > > > > > > > > open > > > > > > > > > > > > > > > > > Iometer from a command line so that the > > > Speedometer > > > > > > > opens > > > > > > > > > up > > > > > > > > > > > also? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks, > > > > > > > > > > > > > > > > > Steve Adams > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------- > > > > > > > > > > > > > > SF email is sponsored by - The IT Product Guide > > > > > > > > > > > > > > Read honest & candid reviews on hundreds of IT > > > Products > > > > > from > > > > > > > real > > > > > > > > > > > users. > > > > > > > > > > > > > > Discover which products truly live up to the > hype. > > > Start > > > > > > > reading > > > > > > > > > now. > > > > > > > > > > > > > > > > > http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click > > > > > > > > > > > > > > _______________________________________________ > > > > > > > > > > > > > > Iometer-user mailing list > > > > > > > > > > > > > > Iom...@li... > > > > > > > > > > > > > > > > > https://lists.sourceforge.net/lists/listinfo/iometer-user > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > |