Re: [icap-server] Questions aboue the installation of icap.

[Geetha M. <ge...@in...>]

please mail the complete squid.conf (atleast the http_access lines).
Looks like there is some problem with the acl's you configured.

I understand/assume that you are able to browse the web when your client
runs on a different machine but there is an error only if your client
runs on the local machine.
regards,
Geetha

ma...@so... wrote:
> 
> Thanks, Geetha pal!
> 
> I have resolved the trouble simply by replace
> "210.73.46.75" by "demo.gscas.ac.cn". Thanks
> again for your kind and intelligence!
> 
> But I meet with another trouble, when browing the web
> page through icap_client on 210.73.46.75, I got an error
> that I have no access. But other machine works fine.
> How to resolve the trouble?
> 
> Cheers,
> George Erik
> 
> -----  Original Message  -----
> From: Geetha Manjunath
> To: ma...@so...
> Cc: ica...@li...
> Subject: Re: [icap-server] Questions aboue the installation of icap.
> Sent: Sat Jun 29 20:46:19 CST 2002
> 
> > Please try the following and let me know what happens...
> > 1. Check whether your icap server is working ok. You do that as follows:
> >   telnet 210.73.46.75 1344
> >   - Does it connect?
> >   1(a) If yes. cut and paste the lines from icap_server/tests/icap_req2
> > for telnet. (You can also do a netcat if that is installed.)
> >    - you should get a response from the icap server
> >   1(b) If no, change the icap_service lines in squid.conf by replacing
> > 210.73.46.75 with demo.gscas.ac.cn . Restart squid and try.
> >
> > 2. Run squid on command line as "squid -X -N" and look for any parse
> > errors in conf file.
> >    - Ensure that the icap_service lines are all on a single line
> >       SAME LINE: icap_service resService respmod_precache 0
> > icap://210.73.46.75:1344/respmod
> >
> > 3. Set "icap_enable off" in the squid.conf file and try using squid
> > without icap. You should be able to browse things on the web with your
> > Konqueror browser.
> >
> > Let us hope we do not need any more checks.. :-)
> >
> > Happy Weekend!
> >
> > Thanks and regards
> > Geetha
> >
> >
> >
> >
> > ma...@so... wrote:
> > >
> > > Hi, pals!
> > >
> > > When user visiting web pages through icap-client(proxy
> > > server), they got errors, "broken pipe". I want to make it
> > > clear that whether I have installed icap-server and icap-client
> > > correctly.
> > >
> > > I am using Reh Hat 7.2, Kernel 2.4.7-10,
> > > squid-icap-client-1.2-src.tgz,
> > > icap_server-1.2.tar.gz.
> > >
> > > 0.install Python and PyXML
> > >
> > > 1. Install icap-client:
> > >
> > > ./configure --enable-icap-support --prefix=/usr/local/squid
> > > make
> > > make install
> > >
> > > modify squid.conf
> > > -----------
> > > icap_enable on
> > > icap_mode both
> > > icap_service reqService reqmod_precache 0 icap://210.73.46.75:1344/reqmod
> > > icap_service resService respmod_precache 0 icap://210.73.46.75:1344/respmod
> > > icap_class MyClass reqService resService
> > > icap_access MyClass allow all
> > > icap_access reqService allow all
> > > icap_access resService allow all
> > > -----------
> > >
> > > modify squid.conf
> > > -----------
> > > cache_mem
> > > cache_dir
> > > acl
> > > http_access
> > > -----------
> > > ./squid -z
> > >
> > > 2. install icap-server
> > > modify the setup file
> > > -----------
> > > export ICAP_PATH=`pwd`
> > > export PYTHONPATH=$ICAP_PATH/medusa-20010416:$ICAP_PATH/proxylet:/usr/lib/python2.2/site-packages
> > > -----------
> > > then run . ./setup
> > >
> > > 3.start icap
> > > ./squid -NCd1
> > > ./start_icap.py
> > >
> > > Have I missed anything? Or I did something wrong?
> > >
> > > Cheers,
> > > George Erik
> > >
> > > -------------------------------------------------------
> > > This sf.net email is sponsored by:ThinkGeek
> > > No, I will not fix your computer.
> > > http://thinkgeek.com/sf
> > > _______________________________________________
> > > icap-server-general mailing list
> > > ica...@li...
> > > https://lists.sourceforge.net/lists/listinfo/icap-server-general