RE: [iaxmodem-users] iaxmodem and hylafax problems
Brought to you by:
faxguy
From: Anton K. <akr...@in...> - 2006-02-26 18:16:30
|
|-----Original Message----- |From: iax...@li...=20 |[mailto:iax...@li...] On Behalf=20 |Of Administrator TOOTAI |Sent: Sunday, February 26, 2006 10:30 AM |To: iax...@li... |Subject: Re: [iaxmodem-users] iaxmodem and hylafax problems | |Please don't top post and no need to send me a copy, I'm=20 |subscribed on the list ;-) | |Anton Krall a =E9crit : | |>Daniel, Im ssending ou the faxes using my laptop. |> |>Im using spamdsp 0.0.3 that comes with iaxmodem latest version 0.0.13 |> =20 |> |Did you properly remove the previous 0.0.2 library? | |>(when I tackle this problem another will come since I need to use=20 |>spandsp 0.0.2pre21d with unicall and r2mfc and seems that version of=20 |>spandsp is not compatible with iaxmodem) |> |>Could it be that my laptop is the one causing the problems?=20 |>It=92s a windows xp laptop. |> =20 |> |Always when I get such kind of error, I try at first with=20 |different fax machines/fax software. If you check on=20 |soft-switch website you will see that there are some issues=20 |with Canon or HP fax machines, so double or better triple=20 |check before investigating more in iaxmodem. | |My 2cts | |>=20 Afer trying to send using another fax machine, I still get the same = error: Feb 26 12:18:01.02: [29834]: SESSION BEGIN 000000045 525557815112 Feb 26 12:18:01.02: [29834]: HylaFAX (tm) Version 4.2.5 Feb 26 12:18:01.02: [29834]: CallID: "5552339280" "Intruder: 5552339280" = "" "s" Feb 26 12:18:01.02: [29834]: MODEM set XON/XOFF/FLUSH: input ignored, = output disabled Feb 26 12:18:01.02: [29834]: <-- [4:ATA\r] Feb 26 12:18:05.12: [29834]: --> [7:CONNECT] Feb 26 12:18:05.12: [29834]: ANSWER: FAX CONNECTION DEVICE = '/dev/ttyIAX' Feb 26 12:18:05.12: [29834]: STATE CHANGE: ANSWERING -> RECEIVING Feb 26 12:18:05.12: [29834]: RECV FAX: begin Feb 26 12:18:05.12: [29834]: <-- HDLC<32:FF C0 04 AD 00 55 12 9E 36 86 = 62 82 1A 04 14 2E B6 94 04 6A A6 4E CE 96 F6 76 04 2C 74 4C 74 AC> Feb 26 12:18:05.12: [29834]: <-- data [32] Feb 26 12:18:05.12: [29834]: <-- data [2] Feb 26 12:18:06.18: [29834]: --> [7:CONNECT] Feb 26 12:18:06.18: [29834]: <-- HDLC<23:FF C0 02 04 CE A6 CE 96 4E 0E = 4E A6 2E 76 A2 4E A6 26 AE 4E 2E 76 92> Feb 26 12:18:06.18: [29834]: <-- data [23] Feb 26 12:18:06.18: [29834]: <-- data [2] Feb 26 12:18:07.00: [29834]: --> [7:CONNECT] Feb 26 12:18:07.00: [29834]: <-- HDLC<13:FF C8 01 00 73 5F 23 01 FB C1 = 01 01 18> Feb 26 12:18:07.00: [29834]: <-- data [13] Feb 26 12:18:07.00: [29834]: <-- data [2] Feb 26 12:18:07.60: [29834]: --> [2:OK] Feb 26 12:18:07.60: [29834]: <-- [9:AT+FRH=3D3\r] Feb 26 12:18:09.66: [29834]: --> [7:CONNECT] Feb 26 12:18:09.66: [29834]: --> HDLC<25:FF C0 C2 04 E6 76 96 2E 36 AE = CE 76 F6 C2 04 4E A6 26 AE 4E 2E 76 92 CA FD> Feb 26 12:18:09.66: [29834]: --> [2:OK] Feb 26 12:18:09.66: [29834]: REMOTE TSI "Intruder Consulting" Feb 26 12:18:09.66: [29834]: <-- [9:AT+FRH=3D3\r] Feb 26 12:18:10.06: [29834]: --> [7:CONNECT] Feb 26 12:18:10.06: [29834]: --> HDLC<8:FF C8 C1 00 63 0E EE 62> Feb 26 12:18:10.06: [29834]: --> [2:OK] Feb 26 12:18:10.06: [29834]: REMOTE wants 9600 bit/s Feb 26 12:18:10.06: [29834]: REMOTE wants A4 page width (215 mm) Feb 26 12:18:10.06: [29834]: REMOTE wants A4 page length (297 mm) Feb 26 12:18:10.06: [29834]: REMOTE wants 7.7 line/mm Feb 26 12:18:10.06: [29834]: REMOTE wants 2-D MR Feb 26 12:18:10.06: [29834]: RECV training at v.29 9600 bit/s Feb 26 12:18:10.06: [29834]: MODEM set XON/XOFF/DRAIN: input ignored, = output generated Feb 26 12:18:10.06: [29834]: <-- [10:AT+FRM=3D96\r] Feb 26 12:18:10.62: [29834]: --> [7:CONNECT] Feb 26 12:18:12.26: [29834]: MODEM set XON/XOFF/DRAIN: input ignored, = output disabled Feb 26 12:18:12.26: [29834]: RECV: TCF 1952 bytes, 25% non-zero, 1160 zero-run Feb 26 12:18:12.26: [29834]: RECV: reject TCF (too many non-zero, max = 10%) Feb 26 12:18:12.26: [29834]: RECV: reject TCF (zero run too short, min = 1200) Feb 26 12:18:12.26: [29834]: --> [10:NO CARRIER] Feb 26 12:18:12.26: [29834]: <-- [9:AT+FRS=3D7\r] Feb 26 12:18:12.32: [29834]: --> [2:OK] Feb 26 12:18:12.32: [29834]: <-- [9:AT+FTH=3D3\r] Feb 26 12:18:12.34: [29834]: --> [7:CONNECT] Feb 26 12:18:12.34: [29834]: <-- HDLC<3:FF C8 22> Feb 26 12:18:12.34: [29834]: <-- data [3] Feb 26 12:18:12.34: [29834]: <-- data [2] Feb 26 12:18:13.82: [29834]: --> [2:OK] Feb 26 12:18:13.82: [29834]: TRAINING failed Feb 26 12:18:13.82: [29834]: <-- [9:AT+FRH=3D3\r] Feb 26 12:18:15.86: [29834]: --> [7:CONNECT] Feb 26 12:18:15.86: [29834]: --> HDLC<25:FF C0 C2 04 E6 76 96 2E 36 AE = CE 76 F6 C2 04 4E A6 26 AE 4E 2E 76 92 CA FD> Feb 26 12:18:15.86: [29834]: --> [2:OK] Feb 26 12:18:15.86: [29834]: REMOTE TSI "Intruder Consulting" Feb 26 12:18:15.86: [29834]: <-- [9:AT+FRH=3D3\r] Feb 26 12:18:16.28: [29834]: --> [7:CONNECT] Feb 26 12:18:16.28: [29834]: --> HDLC<8:FF C8 C1 00 73 0E ED 11> Feb 26 12:18:16.28: [29834]: --> [2:OK] Feb 26 12:18:16.28: [29834]: REMOTE wants 7200 bit/s Feb 26 12:18:16.28: [29834]: REMOTE wants A4 page width (215 mm) Feb 26 12:18:16.28: [29834]: REMOTE wants A4 page length (297 mm) Feb 26 12:18:16.28: [29834]: REMOTE wants 7.7 line/mm Feb 26 12:18:16.28: [29834]: REMOTE wants 2-D MR Feb 26 12:18:16.28: [29834]: RECV training at v.29 7200 bit/s Feb 26 12:18:16.28: [29834]: MODEM set XON/XOFF/DRAIN: input ignored, = output generated Feb 26 12:18:16.28: [29834]: <-- [10:AT+FRM=3D72\r] Feb 26 12:18:16.84: [29834]: --> [7:CONNECT] Feb 26 12:18:18.34: [29834]: MODEM set XON/XOFF/DRAIN: input ignored, = output disabled Feb 26 12:18:18.34: [29834]: RECV: TCF 1350 bytes, 0% non-zero, 748 = zero-run Feb 26 12:18:18.34: [29834]: RECV: reject TCF (zero run too short, min = 900) Feb 26 12:18:18.34: [29834]: --> [10:NO CARRIER] Feb 26 12:18:18.34: [29834]: <-- [9:AT+FRS=3D7\r] Feb 26 12:18:18.40: [29834]: --> [2:OK] Feb 26 12:18:18.40: [29834]: <-- [9:AT+FTH=3D3\r] Feb 26 12:18:18.42: [29834]: --> [7:CONNECT] Feb 26 12:18:18.42: [29834]: <-- HDLC<3:FF C8 22> Feb 26 12:18:18.42: [29834]: <-- data [3] Feb 26 12:18:18.42: [29834]: <-- data [2] Feb 26 12:18:19.90: [29834]: --> [2:OK] Feb 26 12:18:19.90: [29834]: TRAINING failed Feb 26 12:18:19.90: [29834]: <-- [9:AT+FRH=3D3\r] Feb 26 12:18:21.94: [29834]: --> [7:CONNECT] Feb 26 12:18:21.94: [29834]: --> HDLC<25:FF C0 C2 04 E6 76 96 2E 36 AE = CE 76 F6 C2 04 4E A6 26 AE 4E 2E 76 92 CA FD> Feb 26 12:18:21.94: [29834]: --> [2:OK] Feb 26 12:18:21.94: [29834]: REMOTE TSI "Intruder Consulting" Feb 26 12:18:21.94: [29834]: <-- [9:AT+FRH=3D3\r] Feb 26 12:18:22.36: [29834]: --> [7:CONNECT] Feb 26 12:18:22.36: [29834]: --> HDLC<8:FF C8 C1 00 53 0E EB F7> Feb 26 12:18:22.36: [29834]: --> [2:OK] Feb 26 12:18:22.36: [29834]: REMOTE wants 4800 bit/s Feb 26 12:18:22.36: [29834]: REMOTE wants A4 page width (215 mm) Feb 26 12:18:22.36: [29834]: REMOTE wants A4 page length (297 mm) Feb 26 12:18:22.36: [29834]: REMOTE wants 7.7 line/mm Feb 26 12:18:22.36: [29834]: REMOTE wants 2-D MR Feb 26 12:18:22.36: [29834]: RECV training at v.27ter 4800 bit/s Feb 26 12:18:22.36: [29834]: MODEM set XON/XOFF/DRAIN: input ignored, = output generated Feb 26 12:18:22.36: [29834]: <-- [10:AT+FRM=3D48\r] Feb 26 12:18:26.86: [29834]: --> [0:] Feb 26 12:18:26.86: [29834]: MODEM <Empty line> Feb 26 12:18:26.86: [29834]: MODEM TIMEOUT: receiving TCF Feb 26 12:18:26.86: [29834]: <-- data [1] Feb 26 12:18:26.88: [29834]: --> [2:OK] Feb 26 12:18:26.88: [29834]: MODEM set XON/XOFF/DRAIN: input ignored, = output disabled Feb 26 12:18:26.88: [29834]: <-- [9:AT+FRS=3D7\r] Feb 26 12:18:26.88: [29834]: --> [2:OK] Feb 26 12:18:26.88: [29834]: <-- [9:AT+FTH=3D3\r] Feb 26 12:18:26.90: [29834]: --> [7:CONNECT] Feb 26 12:18:26.90: [29834]: <-- HDLC<3:FF C8 22> Feb 26 12:18:26.90: [29834]: <-- data [3] Feb 26 12:18:26.90: [29834]: <-- data [2] Feb 26 12:18:28.38: [29834]: --> [2:OK] Feb 26 12:18:28.38: [29834]: TRAINING failed Feb 26 12:18:28.38: [29834]: <-- [9:AT+FRH=3D3\r] Feb 26 12:18:30.46: [29834]: --> [7:CONNECT] Feb 26 12:18:30.46: [29834]: --> HDLC<25:FF C0 C2 04 E6 76 96 2E 36 AE = CE 76 F6 C2 04 4E A6 26 AE 4E 2E 76 92 CA FD> Feb 26 12:18:30.46: [29834]: --> [2:OK] Feb 26 12:18:30.46: [29834]: REMOTE TSI "Intruder Consulting" Feb 26 12:18:30.46: [29834]: <-- [9:AT+FRH=3D3\r] Feb 26 12:18:30.88: [29834]: --> [7:CONNECT] Feb 26 12:18:30.88: [29834]: --> HDLC<8:FF C8 C1 00 43 0E E8 84> Feb 26 12:18:30.88: [29834]: --> [2:OK] Feb 26 12:18:30.88: [29834]: REMOTE wants 2400 bit/s Feb 26 12:18:30.88: [29834]: REMOTE wants A4 page width (215 mm) Feb 26 12:18:30.88: [29834]: REMOTE wants A4 page length (297 mm) Feb 26 12:18:30.88: [29834]: REMOTE wants 7.7 line/mm Feb 26 12:18:30.88: [29834]: REMOTE wants 2-D MR Feb 26 12:18:30.88: [29834]: RECV training at v.27ter fallback mode 2400 bit/s Feb 26 12:18:30.88: [29834]: MODEM set XON/XOFF/DRAIN: input ignored, = output generated Feb 26 12:18:30.88: [29834]: <-- [10:AT+FRM=3D24\r] Feb 26 12:18:32.14: [29834]: --> [7:CONNECT] Feb 26 12:18:33.64: [29834]: MODEM set XON/XOFF/DRAIN: input ignored, = output disabled Feb 26 12:18:33.64: [29834]: RECV: TCF 457 bytes, 1% non-zero, 450 = zero-run Feb 26 12:18:33.64: [29834]: --> [10:NO CARRIER] Feb 26 12:18:33.64: [29834]: <-- [9:AT+FRS=3D7\r] Feb 26 12:18:33.70: [29834]: --> [2:OK] Feb 26 12:18:33.70: [29834]: TRAINING succeeded Feb 26 12:18:33.70: [29834]: <-- [9:AT+FTH=3D3\r] Feb 26 12:18:33.72: [29834]: --> [7:CONNECT] Feb 26 12:18:33.72: [29834]: <-- HDLC<3:FF C8 21> Feb 26 12:18:33.72: [29834]: <-- data [3] Feb 26 12:18:33.72: [29834]: <-- data [2] Feb 26 12:18:35.20: [29834]: --> [2:OK] Feb 26 12:18:35.20: [29834]: <-- [10:AT+FRM=3D24\r] Feb 26 12:18:36.66: [29834]: --> [7:CONNECT] Feb 26 12:18:36.66: [29834]: MODEM input buffering enabled Feb 26 12:18:36.66: [29834]: MODEM set XON/XOFF/FLUSH: input ignored, = output generated Feb 26 12:18:36.66: [29834]: RECV: begin page Feb 26 12:18:38.76: [29834]: RECV: 40 total lines, 0 bad lines, 0 consecutive bad lines Feb 26 12:18:38.76: [29834]: RECV: end page Feb 26 12:18:38.76: [29834]: --> [10:NO CARRIER] Feb 26 12:18:38.76: [29834]: <-- [9:AT+FRH=3D3\r] Feb 26 12:18:38.86: [29834]: --> [5:ERROR] Feb 26 12:18:38.86: [29834]: MODEM Command error Feb 26 12:18:38.86: [29834]: RECV keeping unconfirmed page Feb 26 12:18:38.86: [29834]: RECV FAX (000000045): from Intruder = Consulting, page 1 in 0:33, A4, 7.7 line/mm, 2-D MR, 2400 bit/s Feb 26 12:18:38.86: [29834]: RECV FAX: T.30 T2 timeout, expected page = not received Feb 26 12:18:38.86: [29834]: RECV FAX (000000045): session with Intruder Consulting terminated abnormally: T.30 T2 timeout, expected page not received Feb 26 12:18:38.86: [29834]: RECV FAX: bin/faxrcvd = "recvq/fax000000043.tif" "ttyIAX" "000000045" "T.30 T2 timeout, expected page not received" "5552339280" "Intruder: 5552339280" "" "s" Feb 26 12:18:38.87: [29834]: RECV FAX: end Feb 26 12:18:38.87: [29834]: SESSION END Feb 26 12:18:38.87: [29834]: RECV FAX (000000045): = recvq/fax000000043.tif from Intruder Consulting, route to <unspecified>, 1 pages in 0:33 Any ideas what am I doing wrong? |