[iaxmodem-users] modem wedged after sending fax
Brought to you by:
faxguy
|
From: Marco <ma...@co...> - 2006-02-15 23:11:47
|
Hi all, I've still some problems sending faxes to some numbers (while other problems has been solved after upgrading to 0.11) The session trace reports only: Feb 15 23:54:10.66: [26012]: DIAL XXXX Feb 15 23:54:10.66: [26012]: <-- [17:ATDTXXXX\r] Feb 15 23:57:10.66: [26012]: MODEM TIMEOUT: reading line from modem From this point the modem is wedged: FaxGetty[26005]: MODEM set baud rate: 19200 baud, input flow XON/XOFF, output flow XON/XOFF FaxGetty[26005]: DELAY 10 ms FaxGetty[26005]: MODEM flush i/o FaxGetty[26005]: <-- [4:ATZ\r] FaxGetty[26005]: --> [3:ATZ] FaxGetty[26005]: --> [2:OK] FaxGetty[26005]: DELAY 3000 ms FaxGetty[26005]: MODEM flush i/o FaxGetty[26005]: <-- [5:ATH1\r] FaxGetty[26005]: --> [4:ATH1] FaxGetty[26005]: --> [5:ERROR] FaxGetty[26005]: MODEM Command error FaxGetty[26005]: MODEM set DTR OFF FaxGetty[26005]: MODEM set baud rate: 0 baud (flow control unchanged) FaxGetty[26005]: Unable to setup modem on /dev/ttyIAX; giving up after 2 attempts FaxGetty[26005]: CLOSE /dev/ttyIAX FaxQueuer[25998]: MODEM /dev/ttyIAX appears to be wedged FaxQueuer[25998]: MODEM WEDGED: bin/wedged "ttyIAX" "/dev/ttyIAX" I have to restart iaxmodem in order to solve the problem. Has someone any hints? Even if I'm not able to send faxes to such numbers, at least I need not the modem not to be wedged. Thanks. -- Marco |