[I810fb-user] Splashscreens?
Status: Beta
Brought to you by:
adaplas
|
From: Alexander G. <al...@vi...> - 2003-09-05 08:04:58
|
Hi,
i've installed the 0.23 and 0.23-0.35 patch on a vanilla 2.4.20
kernel. The framebuffer works like a charm. Thanks for the great work.
Now i wanted to enable some splash screen, attached the splash image to
my initrd and did a reboot.
This is what dmesg says (only relevant lines, or at least what i mean is
relevant). Are there any known reasons the splash image can't get displayed?
Kernel command line: BOOT_IMAGE=linux-2.4.20-i810 ro root=301 BOOT_FILE=/boot/linux-2.4.20 hdc=ide-scsi splash=silent video=i810fb:vram=4:xres=800:yres=600:bpp=16:hsync1=30:hsync2=55:vsync1=60:vsync2=60:accel:mtrr
bootsplash: silent mode.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 94M
agpgart: agpgart: Detected an Intel i815 Chipset.
agpgart: AGP aperture is 64M @ 0xe0000000
Looking for splash picture.... silenjpeg size 30406 bytes, found, but framebuffe
r can't handle it!
Console: switching to colour frame buffer device 100x37
fb0: Intel(R) 815 (Internal Graphics with AGP) Framebuffer Device v0.0.35, Tony
Daplas
Video RAM : 4096K
Mode : 800x600-16bpp@59Hz
Acceleration : disabled
MTRR : enabled
External VGA : disabled
Hardware cursor: disabled
Video Timings : VESA GTF (US)
Rotation Code : not built
Interface : enabled
Memory Tiling : disabled
bye, alex
--
alexander goller al...@vi...
|