SocketReader for MLLP and HL7 / Feedback / #2 Output Directory Error

Hi Clayton,

thanks for your feedback.

Your config is buggy. Please see below.

Best regards,
Sebastian

[general]
logfile = c:/RadAdv_log/SocketReader.log
loglvl = debug
useconnections = incoming_socket, incoming_file

[incoming_socket]
queuename = socket-to-file
transtech = file (should be socket as you want to open ports here)
transdir = in
usehl7 = True
useack = True
createserversocket = True
ipaddr = (MUST be given or you will end up in a mess)
port = 5005

[incoming_file] (should be named outgoing_file to reflect your intentions)
queuename = file-to-socket (MUST be named the same as above
"socket-to-file", so both connectors work on the same queue)
transtech = file
transdir = in (MUST be "out" as you want to dump stuff to disk)
usehl7 = False
messagedir = C:/RadAdvocate/filein (please use "" around the path.
Does the path exist? Is messagedir suitable for a file-out connector?
Please consult the README.)
filemask = *.dat (Is filemask suitable for a file-out connector?
Please consult the README.)
cycletime = 120 (Is cycletime suitable for a file-out connector?
Please consult the README.)
maxfiles = 50 (Is maxfiles suitable for a file-out connector? Please
consult the README.)

PGP-Key Fingerprint:
A9DB 35EF D353 A79E 7CEA 3DC5 8474 8C67 84CF DA58

On 18.05.2015 22:54, Clayton Phillips wrote:

[feedback:#2] Output Directory Error

Status: open
Group:
Created: Mon May 18, 2015 08:54 PM UTC by Clayton Phillips
Last Updated: Mon May 18, 2015 08:54 PM UTC
Owner: Sebastian Weigmann

I have configured my .cfg file and started the services. However, each time I run the debug command I receive the following error message:

C:\Program Files\SocketReader>SocketReaderService32.exe debug --configfile "C:\P
rogram Files\SocketReader\SocketReader.cfg"
Debugging service hl7socketreader_configfile - press Ctrl+C to stop.
Info 0x400000FF - HL7-SocketReader starting up.

SocketReader 1.2.4 - an open source project in Python. License: GPLv3.0
Copyright 2010 until today: Sebastian Weigmann
SourceForge URL: http://sourceforge.net/projects/hl7socketreader/
Python Interpreter: CPython 2.7.5 32bit
Host System: Windows JRA_PROXY XP 5.1.2600 x86 x86 Family 15 Model 6 Stepping 5,
GenuineIntel

This project uses python-hl7 by John Paulett. More info is available at:
http://johnpaulett.com/2009/01/10/parsing-hl7-with-python/

Error: Please specify a valid output directory using the "messagedir = DIR" opti
on.

Below is my .cfg:
[general]
logfile = c:/RadAdv_log/SocketReader.log
loglvl = debug
useconnections = incoming_socket, incoming_file

[incoming_socket]
queuename = socket-to-file
transtech = file
transdir = in
usehl7 = True
useack = True
createserversocket = True
ipaddr =
port = 5005

[incoming_file]
queuename = file-to-socket
transtech = file
transdir = in
usehl7 = False
messagedir = C:/RadAdvocate/filein
filemask = *.dat
cycletime = 120
maxfiles = 50

My goal is to listen on port 5005 for a file to be dropped into the C:/RadAdvocate/filein directory.

--Clayton

Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/hl7socketreader/feedback/2/

To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/

Feedback: #2

Hello Sebastian,

Thanks for the assistance. I made the necessary changes. Still getting the
same result:

C:\Program Files\SocketReader>SocketReaderService32.exe debug --configfile
"c:/P

rogram FIles/SocketReader/SocketReader.cfg"

Debugging service hl7socketreader_configfile - press Ctrl+C to stop.

Info 0x400000FF - HL7-SocketReader starting up.

SocketReader 1.2.4 - an open source project in Python. License: GPLv3.0

SourceForge URL: http://sourceforge.net/projects/hl7socketreader/

Python Interpreter: CPython 2.7.5 32bit

Host System: Windows JRA_PROXY XP 5.1.2600 x86 x86 Family 15 Model 6
Stepping 5,

GenuineIntel

This project uses python-hl7 by John Paulett. More info is available at:

http://johnpaulett.com/2009/01/10/parsing-hl7-with-python/

Error: Please specify a valid output directory using the "messagedir = DIR"
opti

on.

Any ideas?

--Clayton

From: Sebastian Weigmann [mailto:jackkane@users.sf.net]
Sent: Tuesday, May 19, 2015 12:21 AM
To: [hl7socketreader:feedback]
Subject: [hl7socketreader:feedback] Re: #2 Output Directory Error

Hi Clayton,

thanks for your feedback.

Your config is buggy. Please see below.

Best regards,
Sebastian

[general]
logfile = c:/RadAdv_log/SocketReader.log
loglvl = debug
useconnections = incoming_socket, incoming_file

[incoming_socket]
queuename = socket-to-file
transtech = file (should be socket as you want to open ports here)
transdir = in
usehl7 = True
useack = True
createserversocket = True
ipaddr = (MUST be given or you will end up in a mess)
port = 5005

[incoming_file] (should be named outgoing_file to reflect your intentions)
queuename = file-to-socket (MUST be named the same as above
"socket-to-file", so both connectors work on the same queue)
transtech = file
transdir = in (MUST be "out" as you want to dump stuff to disk)
usehl7 = False
messagedir = C:/RadAdvocate/filein (please use "" around the path.
Does the path exist? Is messagedir suitable for a file-out connector?
Please consult the README.)
filemask = *.dat (Is filemask suitable for a file-out connector?
Please consult the README.)
cycletime = 120 (Is cycletime suitable for a file-out connector?
Please consult the README.)
maxfiles = 50 (Is maxfiles suitable for a file-out connector? Please
consult the README.)

PGP-Key Fingerprint:
A9DB 35EF D353 A79E 7CEA 3DC5 8474 8C67 84CF DA58

On 18.05.2015 22:54, Clayton Phillips wrote:

[feedback:#2] http://sourceforge.net/p/hl7socketreader/feedback/2 Output
Directory Error

Status: open
Group:
Created: Mon May 18, 2015 08:54 PM UTC by Clayton Phillips
Last Updated: Mon May 18, 2015 08:54 PM UTC
Owner: Sebastian Weigmann

I have configured my .cfg file and started the services. However, each time
I run the debug command I receive the following error message:

C:\Program Files\SocketReader>SocketReaderService32.exe debug --configfile
"C:\P
rogram Files\SocketReader\SocketReader.cfg"
Debugging service hl7socketreader_configfile - press Ctrl+C to stop.
Info 0x400000FF - HL7-SocketReader starting up.

SocketReader 1.2.4 - an open source project in Python. License: GPLv3.0
Copyright 2010 until today: Sebastian Weigmann
SourceForge URL: http://sourceforge.net/projects/hl7socketreader/
http://sourceforge.net/projects/hl7socketreader
Python Interpreter: CPython 2.7.5 32bit
Host System: Windows JRA_PROXY XP 5.1.2600 x86 x86 Family 15 Model 6
Stepping 5,
GenuineIntel

This project uses python-hl7 by John Paulett. More info is available at:
http://johnpaulett.com/2009/01/10/parsing-hl7-with-python/
http://johnpaulett.com/2009/01/10/parsing-hl7-with-python

Error: Please specify a valid output directory using the "messagedir = DIR"
opti
on.

Below is my .cfg:
[general]
logfile = c:/RadAdv_log/SocketReader.log
loglvl = debug
useconnections = incoming_socket, incoming_file

[incoming_socket]
queuename = socket-to-file
transtech = file
transdir = in
usehl7 = True
useack = True
createserversocket = True
ipaddr =
port = 5005

[incoming_file]
queuename = file-to-socket
transtech = file
transdir = in
usehl7 = False
messagedir = C:/RadAdvocate/filein
filemask = *.dat
cycletime = 120
maxfiles = 50

My goal is to listen on port 5005 for a file to be dropped into the
C:/RadAdvocate/filein directory.

--Clayton

Sent from sourceforge.net because you indicated interest in
https://sourceforge.net/p/hl7socketreader/feedback/2/
https://sourceforge.net/p/hl7socketreader/feedback/2

To unsubscribe from further messages, please visit
https://sourceforge.net/auth/subscriptions/
https://sourceforge.net/auth/subscriptions

[feedback:#2] http://sourceforge.net/p/hl7socketreader/feedback/2 Output
Directory Error

Status: open
Group:
Created: Mon May 18, 2015 08:54 PM UTC by Clayton Phillips
Last Updated: Mon May 18, 2015 08:54 PM UTC
Owner: Sebastian Weigmann

I have configured my .cfg file and started the services. However, each time
I run the debug command I receive the following error message:

This project uses python-hl7 by John Paulett. More info is available at:
http://johnpaulett.com/2009/01/10/parsing-hl7-with-python/
http://johnpaulett.com/2009/01/10/parsing-hl7-with-python

Error: Please specify a valid output directory using the "messagedir = DIR"
opti
on.

Below is my .cfg:
[general]
logfile = c:/RadAdv_log/SocketReader.log
loglvl = debug
useconnections = incoming_socket, incoming_file

[incoming_socket]
queuename = socket-to-file
transtech = file
transdir = in
usehl7 = True
useack = True
createserversocket = True
ipaddr =
port = 5005

[incoming_file]
queuename = file-to-socket
transtech = file
transdir = in
usehl7 = False
messagedir = C:/RadAdvocate/filein
filemask = *.dat
cycletime = 120
maxfiles = 50

My goal is to listen on port 5005 for a file to be dropped into the
C:/RadAdvocate/filein directory.

--Clayton

Sent from sourceforge.net because you indicated interest in
https://sourceforge.net/p/hl7socketreader/feedback/2/
https://sourceforge.net/p/hl7socketreader/feedback/2

To unsubscribe from further messages, please visit
https://sourceforge.net/auth/subscriptions/
https://sourceforge.net/auth/subscriptions

This email has been checked for viruses by Avast antivirus software.
http://www.avast.com

Feedback: #2

alternate

Output Directory Error

Group

Searches

Help

#2 Output Directory Error

Related

Discussion

Related

Related