#5 Corrupted Model Number on V6.3

[Anonymous]

I was just doing an update from hdparm 6.1
to hdparm 6.3 to test some dma features in my
embedded ppc system.

hdparm 6.1 was working fine.
It shows my Maxtor's Model name and Serial No
and Firmware Rev correctly.
But hdparm 6.3 showes me this:
(note the first lines).

root@ecam:~$ hdparm -I /dev/hda

/dev/hda:

ATA device, with non-removable media
Model Number: MAx@oB B2P
Serial Number: B1B3BF@
Firmware Revision: BAH1BM
Standards:
Supported: 7 6 5 4
Likely used: 7
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 240121728
device size with M = 1024*1024: 117246 MBytes
device size with M = 1000*1000: 122942
MBytes (122 GB)
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, no
device specific minimum
R/W multiple sector transfer: Max = 0 Current = 0
Recommended acoustic management value: 192,
current value: 66
DMA: mdma0 mdma1 *mdma2
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY
flow control=120ns
Commands/features:
Enabled Supported:
* NOP cmd
* READ BUFFER cmd
* WRITE BUFFER cmd
* Host Protected Area feature set
* Look-ahead
* Write cache
* Power Management feature set
Security Mode feature set
* SMART feature set
* Mandatory FLUSH CACHE command
* Device Configuration Overlay feature set
* Automatic Acoustic Management feature set
SET MAX security extension
Advanced Power Management feature set
* DOWNLOAD MICROCODE cmd
* SMART self-test
* SMART error logging
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
not supported: enhanced erase
HW reset results:
CBLID- below Vih
Device num = 0 determined by CSEL
Checksum: correct

[Nobody/Anonymous]

Logged In: NO

Oh, my email is clemens/dot_koller/at/anagramm_dot/de

[Mark Lord]

Logged In: YES
user_id=350110

Ugh. The -I has been overhauled in v6.4. Please retest
with v6.4, and if it fails, send me the output of "hdparm
--Istdout" for that drive.