From: Alexandru C. <al...@vp...> - 2004-03-10 07:55:48
|
Hi Michael, > I've just installed Hamlib-1.2.0 (from source) and GnomeRIG-cvs on my > redhat 7.3-based laptop running linux-2.4.23. > > Hamlib explicitly supports the Drake R8B. I have the R8A which is very > like the R8B minus some memories and a different synchronous detector. > I've compared the control codes for these two units and they are, for > most intents and purposes, the same -- certainly the power on/off > controls are identical. > > When I start grig from a console, I get these messages: > ** WARNING **: gnome_hamlib_rig.c: Could not get power status from RIG. > ** WARNING **: gnome_hamlib_rig.c: Could not get mode and pbwidth from > RIG. > ** WARNING **: gnome_hamlib_rig.c: Could not get PTT status from RIG. > ** WARNING **: gnome-hamlib-rig.c: Could not get frequency. > GnomeUI-WARNING **: Could not open help topics file NULL > > Since the messages seem to be coming from hamlib, I'm addressing my > problem to this list. Please let me know if this is an inappropriate > venue. No, actually these messages come from grig, but it seems that your problem is between your rig and hamlib. I think it is better if you try to use rigctl (the command line tool that comes with hamlib), before you use grig. With grig, you will not see any error/debug messages until the rig has been opened and initialized and it is not suitable unless you know that hamlib is working with your rig. Alex |