Re: [Hamlib-developer] IC821H

[William B. <be...@ai...>]

Mike,I will pull yours and try it.  It did look like your ic821h was in the master as it has VFOB, Main and Sub which you added.Bill, WD5HHHSent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone
-------- Original message --------From: Black Michael <mdb...@ya...> Date: 12/21/19  22:33  (GMT-06:00) To: ham...@li..., William Beal <be...@ai...> Subject: Re: [Hamlib-developer] IC821H Have you tried my fork?  Hasn't been integrated in the main yet.I believe we got the 821 working with gpredict.https://github.com/mdblack98/Hamlibde Mike W9MDB
        
        
        
            
                
                
                    On Saturday, December 21, 2019, 06:45:37 PM CST, William Beal <be...@ai...> wrote:
                
                
                
                I have been working on the ic821h.c file in a non-GIT mode.  I cannot get the ICOM XCHG function to work through the VFO OPS.  It shows in the dump_caps command but when I enter "V XCHG", I get back an invalid parameter. I can send a raw data package to the radio and it works.  For the IC-821H, XCHG swaps the main and sub between the two bands.I did change the following value for XCHG from 0 to 1 but it did not work.static const struct icom_priv_caps ic821h_priv_caps ={     0x4c,           /* default address */     1,          /* 731 mode */     1,          /* XCHG */     ic737_ts_sc_list};I have been comparing ic821h.c to ic910.h.  I don't think I need the complex  IC910 get and set frequency functions. I do have the following lines in the structure "ic821h_caps".vfo_ops =  IC821H_VFO_OPS,and.vfo_op =  icom_vfo_opI have tested to see if by any chance the SATMODE could be programed through CI-V.  I used the same values as the IC-910H since it might have been unpublished in IC-821H.  I found that I could not get it to work so that is a manual function for this radio.  If I can get XCHG to work, I will finish researching what commands can work and give a detailed report.  I would like to get this into the initial 4 update but can wait and do my local thing for the mean time.  My end goal is to have the radio controlled from GPredict to handle the Doppler shift for satellite communication.Bill, WD5HHH_______________________________________________Hamlib-developer mailing lis...@li...://lists.sourceforge.net/lists/listinfo/hamlib-developer