Menu
▾
▴
hackndev-commit
|
From: <ph...@us...> - 2007-02-02 07:08:37
|
Revision: 788
http://svn.sourceforge.net/hackndev/?rev=788&view=rev
Author: phiren
Date: 2007-02-01 23:08:34 -0800 (Thu, 01 Feb 2007)
Log Message:
-----------
Added support for the Palm Zire 31
Modified Paths:
--------------
linux4palm/linux/trunk/arch/arm/mach-pxa/Kconfig
linux4palm/linux/trunk/arch/arm/mach-pxa/Makefile
Added Paths:
-----------
linux4palm/linux/trunk/arch/arm/configs/palmz31_defconfig
linux4palm/linux/trunk/arch/arm/mach-pxa/palmz31/
linux4palm/linux/trunk/arch/arm/mach-pxa/palmz31/Kconfig
linux4palm/linux/trunk/arch/arm/mach-pxa/palmz31/Makefile
linux4palm/linux/trunk/arch/arm/mach-pxa/palmz31/palmz31-gpio.h
linux4palm/linux/trunk/arch/arm/mach-pxa/palmz31/palmz31.c
Added: linux4palm/linux/trunk/arch/arm/configs/palmz31_defconfig
===================================================================
--- linux4palm/linux/trunk/arch/arm/configs/palmz31_defconfig (rev 0)
+++ linux4palm/linux/trunk/arch/arm/configs/palmz31_defconfig 2007-02-02 07:08:34 UTC (rev 788)
@@ -0,0 +1,925 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.17-hnd0
+# Fri Feb 2 17:11:17 2007
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_MINIMAL_OOPS is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_USELIB=y
+CONFIG_CORE_DUMP=y
+# CONFIG_SLAB is not set
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_SLOB=y
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+# CONFIG_BLK_DEV_IO_TRACE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_AT91RM9200 is not set
+
+#
+# Intel PXA2xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_ARCH_ESERIES is not set
+# CONFIG_MACH_A620 is not set
+# CONFIG_MACH_A716 is not set
+# CONFIG_ARCH_H1900 is not set
+# CONFIG_ARCH_H2200 is not set
+# CONFIG_ARCH_H3900 is not set
+# CONFIG_MACH_H4000 is not set
+# CONFIG_MACH_H4700 is not set
+# CONFIG_MACH_HX2750 is not set
+# CONFIG_ARCH_H5400 is not set
+# CONFIG_MACH_HIMALAYA is not set
+# CONFIG_MACH_HTCUNIVERSAL is not set
+# CONFIG_MACH_HTCALPINE is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_HTCAPACHE is not set
+# CONFIG_MACH_BLUEANGEL is not set
+# CONFIG_MACH_HTCBEETLES is not set
+# CONFIG_ARCH_AXIMX5 is not set
+# CONFIG_ARCH_AXIMX3 is not set
+# CONFIG_ARCH_ROVERP1 is not set
+# CONFIG_ARCH_ROVERP5P is not set
+# CONFIG_MACH_XSCALE_PALMLD is not set
+# CONFIG_MACH_XSCALE_PALMTREO650 is not set
+# CONFIG_MACH_XSCALE_TREO680 is not set
+# CONFIG_MACH_T700WX is not set
+# CONFIG_MACH_TUNGE2 is not set
+# CONFIG_MACH_T3XSCALE is not set
+# CONFIG_MACH_XSCALE_PALMTT5 is not set
+# CONFIG_MACH_XSCALE_PALMTX is not set
+# CONFIG_MACH_PALMZ72 is not set
+# CONFIG_MACH_OMAP_PALMTC is not set
+CONFIG_MACH_ZIRE31=y
+# CONFIG_PXA_SHARPSL is not set
+CONFIG_PXA25x=y
+CONFIG_PXA_RTC_EPOCH=1970
+# CONFIG_SA1100_H3100 is not set
+# CONFIG_SA1100_H3600 is not set
+# CONFIG_SA1100_H3800 is not set
+
+#
+# Linux As Bootloader
+#
+# CONFIG_LAB is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_ARMBOOT_PROC is not set
+CONFIG_XSCALE_PMU=y
+# CONFIG_KEXEC is not set
+
+#
+# Compaq/iPAQ Platforms
+#
+
+#
+# Compaq/iPAQ Drivers
+#
+
+#
+# Compaq/HP iPAQ Drivers
+#
+# CONFIG_IPAQ_HAMCOP is not set
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64m root=/dev/nfs rw nfsroot=/tc ip=:::255.255.255.0::usb0:dhcp init=/linuxrc console=tty0"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+
+#
+# Ethernet (10 or 100Mbit)
+#
+# CONFIG_NET_ETHERNET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+# CONFIG_SERIAL_PXA_CONSOLE is not set
+CONFIG_SERIAL_PXA_COUNT=4
+CONFIG_SERIAL_CORE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# L3 serial bus support
+#
+# CONFIG_L3 is not set
+
+#
+# Mice
+#
+# CONFIG_BUSMOUSE is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_SA1100_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_PXA2XX=y
+
+#
+# SPI Protocol Masters
+#
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# SoC drivers
+#
+# CONFIG_SOC_MQ11XX is not set
+# CONFIG_SOC_T7L66XB is not set
+# CONFIG_SOC_TC6387XB is not set
+# CONFIG_SOC_TC6393XB is not set
+# CONFIG_HTC_ASIC2 is not set
+# CONFIG_HTC_ASIC3 is not set
+
+#
+# Misc devices
+#
+# CONFIG_BATTERY_MONITOR is not set
+# CONFIG_BATTCHARGE_MONITOR is not set
+
+#
+# Multimedia Capabilities Port drivers
+#
+# CONFIG_MCP is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_FIRMWARE_EDID is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_IMAGEON is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+CONFIG_FONT_6x11=y
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_PXAPWM=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_DEVICE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+CONFIG_USB_GADGET_PXA2XX=y
+CONFIG_USB_PXA2XX=y
+CONFIG_USB_PXA2XX_SMALL=y
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_MQ11XX is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+# CONFIG_USB_ETH_RNDIS is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_G_CHAR is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_SQUASHFS_VMALLOC is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_UNION_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_SMALLOOPS is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
+# CONFIG_FORCED_INLINING is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_WAITQ is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
Modified: linux4palm/linux/trunk/arch/arm/mach-pxa/Kconfig
===================================================================
--- linux4palm/linux/trunk/arch/arm/mach-pxa/Kconfig 2007-01-31 20:14:56 UTC (rev 787)
+++ linux4palm/linux/trunk/arch/arm/mach-pxa/Kconfig 2007-02-02 07:08:34 UTC (rev 788)
@@ -51,6 +51,7 @@
source "arch/arm/mach-pxa/palmtx/Kconfig"
source "arch/arm/mach-pxa/palmz72/Kconfig"
source "arch/arm/mach-pxa/palmtc/Kconfig"
+source "arch/arm/mach-pxa/palmz31/Kconfig"
config PXA_SHARPSL
Modified: linux4palm/linux/trunk/arch/arm/mach-pxa/Makefile
===================================================================
--- linux4palm/linux/trunk/arch/arm/mach-pxa/Makefile 2007-01-31 20:14:56 UTC (rev 787)
+++ linux4palm/linux/trunk/arch/arm/mach-pxa/Makefile 2007-02-02 07:08:34 UTC (rev 788)
@@ -48,6 +48,7 @@
obj-$(CONFIG_MACH_PALMZ72) += palmz72/
obj-$(CONFIG_MACH_TUNGE2) += palmte2/
obj-$(CONFIG_MACH_OMAP_PALMTC) += ssp.o palmtc/
+obj-$(CONFIG_MACH_ZIRE31) += palmz31/
# Support for blinky lights
led-y := leds.o
Added: linux4palm/linux/trunk/arch/arm/mach-pxa/palmz31/Kconfig
===================================================================
--- linux4palm/linux/trunk/arch/arm/mach-pxa/palmz31/Kconfig (rev 0)
+++ linux4palm/linux/trunk/arch/arm/mach-pxa/palmz31/Kconfig 2007-02-02 07:08:34 UTC (rev 788)
@@ -0,0 +1,6 @@
+menuconfig MACH_ZIRE31
+ bool "Palm Zire 31"
+ select PXA25x
+ help
+ Say Y here if you are going to run this kernel on a Palm Zire 31.
+
Added: linux4palm/linux/trunk/arch/arm/mach-pxa/palmz31/Makefile
===================================================================
--- linux4palm/linux/trunk/arch/arm/mach-pxa/palmz31/Makefile (rev 0)
+++ linux4palm/linux/trunk/arch/arm/mach-pxa/palmz31/Makefile 2007-02-02 07:08:34 UTC (rev 788)
@@ -0,0 +1,5 @@
+#
+# Makefile for Palm Zire 31 support
+#
+
+obj-$(CONFIG_MACH_ZIRE31) += palmz31.o
Added: linux4palm/linux/trunk/arch/arm/mach-pxa/palmz31/palmz31-gpio.h
===================================================================
--- linux4palm/linux/trunk/arch/arm/mach-pxa/palmz31/palmz31-gpio.h (rev 0)
+++ linux4palm/linux/trunk/arch/arm/mach-pxa/palmz31/palmz31-gpio.h 2007-02-02 07:08:34 UTC (rev 788)
@@ -0,0 +1,16 @@
+/*
+ * palmz31-gpio.h
+ *
+ * Author: Scott Manell <ph...@gm...>
+ *
+ */
+
+#ifndef _ZIRE31_GPIO_H_
+#define _ZIRE31_GPIO_H_
+
+#include <asm/arch/pxa-regs.h>
+
+// This should let us get usb working
+#define GPIO_NR_PALMLD_USB_DETECT 4
+
+#endif
Added: linux4palm/linux/trunk/arch/arm/mach-pxa/palmz31/palmz31.c
===================================================================
--- linux4palm/linux/trunk/arch/arm/mach-pxa/palmz31/palmz31.c (rev 0)
+++ linux4palm/linux/trunk/arch/arm/mach-pxa/palmz31/palmz31.c 2007-02-02 07:08:34 UTC (rev 788)
@@ -0,0 +1,70 @@
+/*
+ * Hardware definitions for Palm Zire 31
+ *
+ * Author: Scott Mansell <ph...@gm...>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <asm/arch/hardware.h>
+#include <asm/mach/map.h>
+#include <asm/domain.h>
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+
+#include <asm/arch/pxa-dmabounce.h>
+#include <asm/arch/pxafb.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxapwm-bl.h>
+
+#include "../generic.h"
+#include "palmz31-gpio.h"
+#define DEBUG
+
+
+static void zire31_backlight_power(int on)
+{
+ /* TODO */
+}
+
+static struct pxafb_mach_info zire31_lcd __initdata = {
+ .pixclock = 0,
+ .xres = 160,
+ .yres = 160,
+ .bpp = 16,
+ .hsync_len = 4,
+ .left_margin = 30,
+ .right_margin = 7,
+ .vsync_len = 1,
+ .upper_margin = 6,
+ .lower_margin = 7,
+ .sync = FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT,
+
+ .lccr0 = 0x00100079,
+ .lccr3 = 0x03403d30,
+
+ .pxafb_backlight_power = zire31_backlight_power,
+};
+
+static void __init zire31_int(void)
+{
+ set_pxa_fb_info(&zire31_lcd);
+
+ GCR &= ~GCR_PRIRDY_IEN;
+}
+
+MACHINE_START(ZIRE31, "Zire 31")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .map_io = pxa_map_io,
+ .init_irq = pxa_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = zire31_int
+MACHINE_END
+
+
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <ph...@us...> - 2007-02-04 08:14:08
|
Revision: 795
http://svn.sourceforge.net/hackndev/?rev=795&view=rev
Author: phiren
Date: 2007-02-04 00:14:03 -0800 (Sun, 04 Feb 2007)
Log Message:
-----------
initramfs, sound and touchscreen added for Palm zire 31
Modified Paths:
--------------
linux4palm/linux/trunk/arch/arm/configs/palmz31_defconfig
linux4palm/linux/trunk/arch/arm/mach-pxa/palmz31/palmz31.c
Modified: linux4palm/linux/trunk/arch/arm/configs/palmz31_defconfig
===================================================================
--- linux4palm/linux/trunk/arch/arm/configs/palmz31_defconfig 2007-02-03 21:40:24 UTC (rev 794)
+++ linux4palm/linux/trunk/arch/arm/configs/palmz31_defconfig 2007-02-04 08:14:03 UTC (rev 795)
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.17-hnd0
-# Fri Feb 2 17:11:17 2007
+# Sun Feb 4 20:58:45 2007
#
CONFIG_ARM=y
CONFIG_MMU=y
@@ -32,7 +32,9 @@
# CONFIG_IKCONFIG is not set
# CONFIG_MINIMAL_OOPS is not set
# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INITRAMFS_SOURCE="usr/zire31initramfs/"
+CONFIG_INITRAMFS_ROOT_UID=1000
+CONFIG_INITRAMFS_ROOT_GID=1000
CONFIG_UID16=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_EMBEDDED=y
@@ -220,7 +222,7 @@
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64m root=/dev/nfs rw nfsroot=/tc ip=:::255.255.255.0::usb0:dhcp init=/linuxrc console=tty0"
+CONFIG_CMDLINE="mem=16m init=/linuxrc"
# CONFIG_XIP_KERNEL is not set
#
@@ -463,7 +465,9 @@
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_TSDEV=y
+CONFIG_INPUT_TSDEV_SCREEN_X=160
+CONFIG_INPUT_TSDEV_SCREEN_Y=160
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
@@ -473,7 +477,17 @@
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+CONFIG_TOUCHSCREEN_WM97XX=y
+# CONFIG_TOUCHSCREEN_WM9705 is not set
+CONFIG_TOUCHSCREEN_WM9712=y
+# CONFIG_TOUCHSCREEN_WM9713 is not set
+# CONFIG_TOUCHSCREEN_WM97XX_PXA is not set
# CONFIG_INPUT_MISC is not set
#
@@ -672,9 +686,46 @@
#
# Sound
#
-# CONFIG_SOUND is not set
+CONFIG_SOUND=y
#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_AC97_BUS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+# CONFIG_SND_PXA2xx_I2SOUND is not set
+CONFIG_SND_PXA2XX_PCM=y
+CONFIG_SND_PXA2XX_AC97=y
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
Modified: linux4palm/linux/trunk/arch/arm/mach-pxa/palmz31/palmz31.c
===================================================================
--- linux4palm/linux/trunk/arch/arm/mach-pxa/palmz31/palmz31.c 2007-02-03 21:40:24 UTC (rev 794)
+++ linux4palm/linux/trunk/arch/arm/mach-pxa/palmz31/palmz31.c 2007-02-04 08:14:03 UTC (rev 795)
@@ -22,14 +22,50 @@
#include <asm/arch/pxa-regs.h>
#include <asm/arch/pxapwm-bl.h>
+#include <asm/arch/audio.h>
+#include <sound/driver.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/initval.h>
+#include <sound/ac97_codec.h>
+
#include "../generic.h"
#include "palmz31-gpio.h"
#define DEBUG
+/**
+ * AC97 audio controller
+ */
+static pxa2xx_audio_ops_t palmld_audio_ops = {
+ /*
+ .startup = palmld_audio_startup,
+ .shutdown = mst_audio_shutdown,
+ .suspend = mst_audio_suspend,
+ .resume = mst_audio_resume,
+ */
+};
+
+static struct platform_device palmld_ac97 = {
+ .name = "pxa2xx-ac97",
+ .id = -1,
+ .dev = { .platform_data = &palmld_audio_ops },
+};
+
+static struct platform_device *devices[] __initdata = {
+ &palmld_ac97,
+};
+
static void zire31_backlight_power(int on)
{
/* TODO */
+ if(on) {
+ PWM_CTRL1 = 0x1;
+ PWM_PWDUTY1 = 0x50;
+ PWM_PERVAL1 = 0x12b;
+ CKEN |= CKEN1_PWM1;
+ } else
+ CKEN &= ~CKEN1_PWM1;
}
static struct pxafb_mach_info zire31_lcd __initdata = {
@@ -41,8 +77,8 @@
.left_margin = 30,
.right_margin = 7,
.vsync_len = 1,
- .upper_margin = 6,
- .lower_margin = 7,
+ .upper_margin = 0,
+ .lower_margin = 0,
.sync = FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT,
.lccr0 = 0x00100079,
@@ -56,6 +92,8 @@
set_pxa_fb_info(&zire31_lcd);
GCR &= ~GCR_PRIRDY_IEN;
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
}
MACHINE_START(ZIRE31, "Zire 31")
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <mar...@us...> - 2007-02-09 19:52:44
|
Revision: 800
http://svn.sourceforge.net/hackndev/?rev=800&view=rev
Author: marex_z71
Date: 2007-02-09 11:52:41 -0800 (Fri, 09 Feb 2007)
Log Message:
-----------
l4p: added gpioed and gpioed-ng to palmld
Modified Paths:
--------------
linux4palm/linux/trunk/arch/arm/configs/palmld_defconfig
linux4palm/linux/trunk/arch/arm/mach-pxa/palmld/Kconfig
linux4palm/linux/trunk/arch/arm/mach-pxa/palmld/Makefile
Added Paths:
-----------
linux4palm/linux/trunk/arch/arm/mach-pxa/palmld/gpioed-ng.c
linux4palm/linux/trunk/arch/arm/mach-pxa/palmld/gpioed.c
Modified: linux4palm/linux/trunk/arch/arm/configs/palmld_defconfig
===================================================================
--- linux4palm/linux/trunk/arch/arm/configs/palmld_defconfig 2007-02-09 19:12:01 UTC (rev 799)
+++ linux4palm/linux/trunk/arch/arm/configs/palmld_defconfig 2007-02-09 19:52:41 UTC (rev 800)
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.17-hnd0
-# Fri Feb 9 19:41:27 2007
+# Fri Feb 9 20:37:32 2007
#
CONFIG_ARM=y
CONFIG_MMU=y
@@ -142,6 +142,8 @@
CONFIG_PALMLD_PCMCIA=m
# CONFIG_PALMLD_USB is not set
CONFIG_PALMLD_IDE=m
+CONFIG_GPIOED=m
+CONFIG_GPIOEDNG=m
# CONFIG_MACH_XSCALE_PALMTREO650 is not set
# CONFIG_MACH_XSCALE_TREO680 is not set
# CONFIG_MACH_T700WX is not set
Modified: linux4palm/linux/trunk/arch/arm/mach-pxa/palmld/Kconfig
===================================================================
--- linux4palm/linux/trunk/arch/arm/mach-pxa/palmld/Kconfig 2007-02-09 19:12:01 UTC (rev 799)
+++ linux4palm/linux/trunk/arch/arm/mach-pxa/palmld/Kconfig 2007-02-09 19:52:41 UTC (rev 800)
@@ -21,3 +21,17 @@
config PALMLD_IDE
tristate "Palm LifeDrive IDE driver"
depends on MACH_XSCALE_PALMLD
+
+config GPIOED
+ tristate "GPIOED"
+ depends on MACH_XSCALE_PALMLD
+ default n
+ help
+ Gpioed: only for debuging and testing!
+
+config GPIOEDNG
+ tristate "GPIOEDNG"
+ depends on MACH_XSCALE_PALMLD
+ default n
+ help
+ Gpioed-ng: only for debuging and testing!
Modified: linux4palm/linux/trunk/arch/arm/mach-pxa/palmld/Makefile
===================================================================
--- linux4palm/linux/trunk/arch/arm/mach-pxa/palmld/Makefile 2007-02-09 19:12:01 UTC (rev 799)
+++ linux4palm/linux/trunk/arch/arm/mach-pxa/palmld/Makefile 2007-02-09 19:52:41 UTC (rev 800)
@@ -7,3 +7,6 @@
obj-$(CONFIG_PALMLD_USB) += palmld_usb.o
obj-$(CONFIG_PALMLD_IDE) += palmld_ide.o
obj-$(CONFIG_PM) += palmld_pm.o
+obj-$(CONFIG_GPIOED) += gpioed.o
+obj-$(CONFIG_GPIOEDNG) += gpioed-ng.o
+
Added: linux4palm/linux/trunk/arch/arm/mach-pxa/palmld/gpioed-ng.c
===================================================================
--- linux4palm/linux/trunk/arch/arm/mach-pxa/palmld/gpioed-ng.c (rev 0)
+++ linux4palm/linux/trunk/arch/arm/mach-pxa/palmld/gpioed-ng.c 2007-02-09 19:52:41 UTC (rev 800)
@@ -0,0 +1,175 @@
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/proc_fs.h>
+
+#include <linux/interrupt.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+#include <linux/sched.h>
+#include <linux/workqueue.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/irqs.h>
+#include <asm/uaccess.h>
+
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+#define PROCFS_NAME "gpio"
+#define DEBUGFS_NAME "gpio"
+
+static struct proc_dir_entry *proc_intf;
+static struct dentry *debugfs_intf;
+
+#define PROCFS_MAX_SIZE 20
+
+static char procfs_buffer[PROCFS_MAX_SIZE];
+static unsigned long procfs_buffer_size = 0;
+
+#define GPIO_TEST(reg, gp) (reg(gp) & GPIO_bit(gp))
+static int dfs_show(struct seq_file *s, void *_)
+{
+ int i,afn;
+ seq_printf(s, "GPIO lines status:\n");
+
+ for(i=0;i<121;i++) {
+ afn = (GAFR(i) & (0x3 << (((i) & 0xf)*2))) >> (((i) & 0xf)*2);
+ seq_printf(s, "%s%d: %s %s %s %s %lx\n",
+ i<10?"0":"",
+ i,
+ GPIO_TEST(GPLR, i)?"*":" ",
+ GPIO_TEST(GPDR, i)?"->":"<-",
+ GPIO_TEST(GRER, i)?"_/":" ",
+ GPIO_TEST(GFER, i)?"\\_":" ",
+ afn);
+
+ }
+
+ return 0;
+}
+
+static int dfs_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, dfs_show, inode->u.generic_ip);
+}
+
+static struct file_operations debug_fops = {
+ .open = dfs_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static void gpio_set(int id, int on)
+{
+ do {
+ if (on)
+ GPSR(id) = GPIO_bit(id);
+ else
+ GPCR(id) = GPIO_bit(id);
+ } while (0);
+}
+
+void set_afn(int gpio, int fn)
+{
+ int gafr;
+ gafr = GAFR(gpio) & ~(0x3 << (((gpio) & 0xf)*2));
+ GAFR(gpio) = gafr | (fn << (((gpio) & 0xf)*2));
+}
+
+void handle_request()
+{
+ char *p = NULL;
+ unsigned long id = simple_strtoul(procfs_buffer+2, &p, 10);
+ switch(procfs_buffer[0]) {
+ case 'L':
+ gpio_set(id, 1);
+ printk(KERN_ERR "GPIOed: GPIO %lu set high\n", id);
+ break;
+ case 'l':
+ gpio_set(id, 0);
+ printk(KERN_ERR "GPIOed: GPIO %lu set low\n", id);
+ break;
+ case 'd':
+ GPDR(id) &= ~(GPIO_bit(id));
+ break;
+ case 'D':
+ GPDR(id) |= GPIO_bit(id);
+ break;
+ case '0':
+ set_afn(id, 0);
+ break;
+ case '1':
+ set_afn(id, 1);
+ break;
+ case '2':
+ set_afn(id, 2);
+ break;
+ default:
+ printk(KERN_ERR "GPIOed: Unknown request\n");
+ break;
+ }
+}
+
+
+int procfile_write(struct file *file, const char *buffer, unsigned long count, void *data)
+{
+ procfs_buffer_size = count;
+ if (procfs_buffer_size > PROCFS_MAX_SIZE ) {
+ procfs_buffer_size = PROCFS_MAX_SIZE;
+ }
+
+ /* write data to the buffer */
+ if ( copy_from_user(procfs_buffer, buffer, procfs_buffer_size) ) {
+ return -EFAULT;
+ }
+
+ handle_request();
+
+ return procfs_buffer_size;
+}
+
+
+static int __init gpioed_init(void)
+{
+ proc_intf = create_proc_entry(PROCFS_NAME, 0644, NULL);
+ if (proc_intf == NULL) {
+ remove_proc_entry(PROCFS_NAME, &proc_root);
+ printk(KERN_ALERT "Error: Could not initialize /proc/%s\n", PROCFS_NAME);
+ return -ENOMEM;
+ }
+
+ /*proc_intf->read_proc = procfile_read;*/
+ proc_intf->write_proc = procfile_write;
+ proc_intf->owner = THIS_MODULE;
+ proc_intf->mode = S_IFREG | S_IRUGO;
+ proc_intf->uid = 0;
+ proc_intf->gid = 0;
+ proc_intf->size = 37;
+
+ debugfs_intf = debugfs_create_file(DEBUGFS_NAME, S_IRUGO, NULL, NULL, &debug_fops);
+
+ printk(KERN_INFO "/proc/%s created\n", PROCFS_NAME);
+
+ return 0;
+}
+
+static void __exit gpioed_exit(void)
+{
+ debugfs_remove(debugfs_intf);
+ remove_proc_entry(PROCFS_NAME, &proc_root);
+ printk(KERN_INFO "/proc/%s removed\n", PROCFS_NAME);
+}
+
+
+/*** Some more stuff ***/
+module_init(gpioed_init);
+module_exit(gpioed_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Vladimir \"Farcaller\" Pouzanov <far...@gm...>");
+MODULE_DESCRIPTION("GPIO editor for PXA26x, second edition");
+
Added: linux4palm/linux/trunk/arch/arm/mach-pxa/palmld/gpioed.c
===================================================================
--- linux4palm/linux/trunk/arch/arm/mach-pxa/palmld/gpioed.c (rev 0)
+++ linux4palm/linux/trunk/arch/arm/mach-pxa/palmld/gpioed.c 2007-02-09 19:52:41 UTC (rev 800)
@@ -0,0 +1,226 @@
+/*** Basic includes ***/
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/proc_fs.h>
+
+#include <linux/interrupt.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+#include <linux/sched.h>
+#include <linux/workqueue.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/irqs.h>
+#include <asm/uaccess.h>
+
+/*** GPIO macros ***/
+#define GET_PALMT3_GPIO(gpio) \
+ (GPLR(GPIO_NR_PALMT3_ ## gpio) & GPIO_bit(GPIO_NR_PALMT3_ ## gpio))
+
+#define SET_PALMT3_GPIO(gpio, setp) \
+ do { \
+ if (setp) \
+ GPSR(GPIO_NR_PALMT3_ ## gpio) = GPIO_bit(GPIO_NR_PALMT3_ ## gpio); \
+ else \
+ GPCR(GPIO_NR_PALMT3_ ## gpio) = GPIO_bit(GPIO_NR_PALMT3_ ## gpio); \
+ } while (0)
+
+#define SET_PALMT3_GPIO_N(gpio, setp) \
+ do { \
+ if (setp) \
+ GPCR(GPIO_NR_PALMT3_ ## gpio) = GPIO_bit(GPIO_NR_PALMT3_ ## gpio); \
+ else \
+ GPSR(GPIO_NR_PALMT3_ ## gpio) = GPIO_bit(GPIO_NR_PALMT3_ ## gpio); \
+ } while (0)
+
+#define GET_GPIO_REG(reg,gpio) (GP##reg(gpio) & GPIO_bit(gpio))
+#define GET_GPIO(gpio) GET_GPIO_REG(LR, gpio)
+
+/*** /proc interface ***/
+static struct proc_dir_entry *proc_intf;
+#define procfs_name "gpioed"
+#define PROCFS_MAX_SIZE 20
+
+static char procfs_buffer[PROCFS_MAX_SIZE];
+static unsigned long procfs_buffer_size = 0;
+
+int procfile_read(char *buffer, char **buffer_location, off_t offset, int buffer_length, int *eof, void *data)
+{
+ int ret;
+
+ if (offset > 0) {
+ /* we have finished to read, return 0 */
+ ret = 0;
+ } else {
+ /* fill the buffer, return the buffer size */
+ ret = sprintf(buffer, "HelloWorld!\n");
+ }
+ return ret;
+}
+
+void handle_request(void);
+
+int procfile_write(struct file *file, const char *buffer, unsigned long count, void *data)
+{
+ procfs_buffer_size = count;
+ if (procfs_buffer_size > PROCFS_MAX_SIZE ) {
+ procfs_buffer_size = PROCFS_MAX_SIZE;
+ }
+
+ /* write data to the buffer */
+ if ( copy_from_user(procfs_buffer, buffer, procfs_buffer_size) ) {
+ return -EFAULT;
+ }
+
+ handle_request();
+
+ return procfs_buffer_size;
+}
+
+/*** IRQ (GPIO) handling ***/
+static struct workqueue_struct *my_workqueue;
+#define MY_WORK_QUEUE_NAME "GPIOed"
+
+static void handle_gpio(void* irq)
+{
+ int gpn = (int)irq;
+ printk(KERN_ERR "*** GPIO *** %d *** is *** %s ***\n", gpn, GET_GPIO(gpn) ? "high" : "low ");
+}
+
+irqreturn_t gpio_irq(int irq, void *dev_id, struct pt_regs *regs)
+{
+ static int initialised = 0;
+ static struct work_struct task;
+
+ if (initialised == 0) {
+ INIT_WORK(&task, handle_gpio, dev_id);
+ initialised = 1;
+ } else {
+ PREPARE_WORK(&task, handle_gpio, dev_id);
+ }
+
+ queue_work(my_workqueue, &task);
+
+ return IRQ_HANDLED;
+}
+
+/*** GPIO R/W ***/
+static int gpio_get(int id)
+{
+ return GET_GPIO(id);
+}
+
+static void gpio_set(int id, int on)
+{
+ do {
+ if (on)
+ GPSR(id) = GPIO_bit(id);
+ else
+ GPCR(id) = GPIO_bit(id);
+ } while (0);
+}
+
+static int gpio_watch(int x)
+{
+ int ret;
+ ret = request_irq (IRQ_GPIO(x), gpio_irq, SA_SAMPLE_RANDOM, "test_handler", (void*)x);
+ set_irq_type (IRQ_GPIO(x), IRQT_BOTHEDGE);
+ if(ret!=0) {
+ printk(KERN_ERR "GPIOed: failed to register for GPIO %d\n", x);
+ return 1;
+ } else {
+ printk(KERN_ERR "GPIOed: Registered GPIO %d\n", x);
+ return 0;
+ }
+}
+
+/*** Request handler ***/
+void handle_request()
+{
+ char *p = NULL;
+ unsigned long base = 10;
+ unsigned long id;
+
+ if((procfs_buffer[0] == 'P') || (procfs_buffer[0] == 'V'))
+ base = 16;
+ id = simple_strtoul(procfs_buffer+2, &p, base);
+ switch(procfs_buffer[0]) {
+ case 'r':
+ printk(KERN_ERR "GPIOed: GPIO %lu is %s\n", id, gpio_get(id)?"high":"low ");
+ break;
+ case 's':
+ gpio_watch(id);
+ break;
+ case 'h':
+ gpio_set(id, 1);
+ printk(KERN_ERR "GPIOed: GPIO %lu set high\n", id);
+ break;
+ case 'l':
+ gpio_set(id, 0);
+ printk(KERN_ERR "GPIOed: GPIO %lu set low\n", id);
+ break;
+ case 'd':
+ printk(KERN_ERR "GPIOed: GPIO %lu is %s\n", id, GET_GPIO_REG(DR,id)?"output":"input");
+ break;
+
+ case 'P':
+ printk(KERN_ERR "GPIOed: P-V for 0x%x is 0x%x\n", id, (unsigned int)phys_to_virt(id));
+ break;
+ case 'V':
+ printk(KERN_ERR "GPIOed: V-P for 0x%x is 0x%x\n", id, (unsigned int)virt_to_phys(id));
+ break;
+ case 'D':
+ base = *((unsigned int*)id);
+ printk(KERN_ERR "GPIOed: 0x%x = 0x%x\n", id, base);
+ break;
+ default:
+ printk(KERN_ERR "GPIOed: Unknown request\n");
+ break;
+ }
+}
+
+/*** init&exit ***/
+static int __init gpioed_init(void)
+{
+ my_workqueue = create_workqueue(MY_WORK_QUEUE_NAME);
+
+ proc_intf = create_proc_entry(procfs_name, 0644, NULL);
+ if (proc_intf == NULL) {
+ remove_proc_entry(procfs_name, &proc_root);
+ printk(KERN_ALERT "Error: Could not initialize /proc/%s\n",
+ procfs_name);
+ return -ENOMEM;
+ }
+
+ proc_intf->read_proc = procfile_read;
+ proc_intf->write_proc = procfile_write;
+ proc_intf->owner = THIS_MODULE;
+ proc_intf->mode = S_IFREG | S_IRUGO;
+ proc_intf->uid = 0;
+ proc_intf->gid = 0;
+ proc_intf->size = 37;
+
+ printk(KERN_INFO "/proc/%s created\n", procfs_name);
+
+ return 0;
+}
+
+static void __exit gpioed_exit(void)
+{
+ destroy_workqueue(my_workqueue);
+ remove_proc_entry(procfs_name, &proc_root);
+ printk(KERN_INFO "/proc/%s removed\n", procfs_name);
+}
+
+
+/*** Some more stuff ***/
+module_init(gpioed_init);
+module_exit(gpioed_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Vladimir \"Farcaller\" Pouzanov <far...@gm...>");
+MODULE_DESCRIPTION("GPIO editor for PXA26x");
+
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <z7...@us...> - 2007-03-01 08:30:33
|
Revision: 891
http://svn.sourceforge.net/hackndev/?rev=891&view=rev
Author: z72ka
Date: 2007-03-01 00:30:28 -0800 (Thu, 01 Mar 2007)
Log Message:
-----------
Palmz72: Added support for Voice Memo button via gpio-keys
Palmz72: small change with key-mapping pxa-keypad
Palmz72: gpio-keys added to defconfig
Modified Paths:
--------------
linux4palm/linux/trunk/arch/arm/configs/palmz72_defconfig
linux4palm/linux/trunk/arch/arm/mach-pxa/palmz72/palmz72.c
Modified: linux4palm/linux/trunk/arch/arm/configs/palmz72_defconfig
===================================================================
--- linux4palm/linux/trunk/arch/arm/configs/palmz72_defconfig 2007-02-28 11:35:22 UTC (rev 890)
+++ linux4palm/linux/trunk/arch/arm/configs/palmz72_defconfig 2007-03-01 08:30:28 UTC (rev 891)
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.20-hnd0
-# Thu Feb 22 15:30:54 2007
+# Thu Mar 1 09:20:29 2007
#
CONFIG_ARM=y
# CONFIG_GENERIC_TIME is not set
@@ -164,8 +164,6 @@
# CONFIG_ARCH_ROVERP1 is not set
# CONFIG_ARCH_ROVERP5P is not set
# CONFIG_MACH_XSCALE_PALMLD is not set
-# CONFIG_GPIOED is not set
-# CONFIG_GPIOEDNG is not set
# CONFIG_MACH_XSCALE_PALMTREO650 is not set
# CONFIG_MACH_XSCALE_TREO680 is not set
# CONFIG_MACH_T700WX is not set
@@ -176,6 +174,8 @@
CONFIG_MACH_PALMZ72=y
CONFIG_PALMZ72_PM=y
CONFIG_PALMZ72_BATTERY=m
+# CONFIG_GPIOED is not set
+# CONFIG_GPIOEDNG is not set
# CONFIG_MACH_OMAP_PALMTC is not set
# CONFIG_MACH_ZIRE31 is not set
# CONFIG_PXA_SHARPSL is not set
@@ -605,7 +605,7 @@
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_GPIO_KEYS is not set
+CONFIG_GPIO_KEYS=y
CONFIG_KEYBOARD_PXA27x=y
# CONFIG_KEYBOARD_PALMIR is not set
CONFIG_KEYBOARD_PALMWK=m
@@ -773,6 +773,7 @@
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_MMC_CARD=y
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_SHARED is not set
@@ -962,7 +963,6 @@
# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MMC_TMIO is not set
# CONFIG_MMC_SAMCOP is not set
-# CONFIG_MMC_WBSD_PALMT3 is not set
#
# Real Time Clock
Modified: linux4palm/linux/trunk/arch/arm/mach-pxa/palmz72/palmz72.c
===================================================================
--- linux4palm/linux/trunk/arch/arm/mach-pxa/palmz72/palmz72.c 2007-02-28 11:35:22 UTC (rev 890)
+++ linux4palm/linux/trunk/arch/arm/mach-pxa/palmz72/palmz72.c 2007-03-01 08:30:28 UTC (rev 891)
@@ -32,6 +32,7 @@
#include <asm/arch/pxapwm-bl.h>
#include <asm/arch/irda.h>
#include <asm/arch/serial.h>
+#include <asm/hardware/gpio_keys.h>
@@ -145,7 +146,7 @@
.keycodes = {
{ /* row 0 */
KEY_POWER, /* Power key */
- KEY_F13, /* Photos */
+ KEY_F11, /* Photos */
KEY_ENTER, /* DPAD Center */
},
{ /* row 1 */
@@ -185,7 +186,27 @@
},
};
+/********************************
+ * GPIO Key - Voice Memo Button *
+ ********************************/
+static struct gpio_keys_button palmz72_pxa_buttons[] = {
+ {KEY_F7, GPIO_NR_PALMZ72_KP_DKIN7, 1, "Voice Memo Button" },
+};
+
+static struct gpio_keys_platform_data palmz72_pxa_keys_data = {
+ .buttons = palmz72_pxa_buttons,
+ .nbuttons = ARRAY_SIZE(palmz72_pxa_buttons),
+};
+
+static struct platform_device palmz72_pxa_keys = {
+ .name = "gpio-keys",
+ .dev = {
+ .platform_data = &palmz72_pxa_keys_data,
+ },
+};
+
+
/********
* IRDA *
********/
@@ -355,6 +376,7 @@
&palmz72_pm,
&palmz72_backlight,
&palmz72_keypad,
+ &palmz72_pxa_keys,
&palmz72_led_device,
};
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <mar...@us...> - 2007-04-18 10:12:53
|
Revision: 957
http://svn.sourceforge.net/hackndev/?rev=957&view=rev
Author: marex_z71
Date: 2007-04-18 03:12:50 -0700 (Wed, 18 Apr 2007)
Log Message:
-----------
PalmT5: Update PM, minor cleanups
Modified Paths:
--------------
linux4palm/linux/trunk/arch/arm/configs/palmt5_defconfig
linux4palm/linux/trunk/arch/arm/mach-pxa/palmt5/Kconfig
linux4palm/linux/trunk/arch/arm/mach-pxa/palmt5/Makefile
linux4palm/linux/trunk/arch/arm/mach-pxa/palmt5/palmt5_pm.c
Removed Paths:
-------------
linux4palm/linux/trunk/arch/arm/mach-pxa/palmt5/palmld_ac97.c
Modified: linux4palm/linux/trunk/arch/arm/configs/palmt5_defconfig
===================================================================
--- linux4palm/linux/trunk/arch/arm/configs/palmt5_defconfig 2007-04-17 21:02:47 UTC (rev 956)
+++ linux4palm/linux/trunk/arch/arm/configs/palmt5_defconfig 2007-04-18 10:12:50 UTC (rev 957)
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.20-hnd0
-# Tue Apr 17 21:06:28 2007
+# Wed Apr 18 11:05:47 2007
#
CONFIG_ARM=y
# CONFIG_GENERIC_TIME is not set
@@ -24,18 +24,20 @@
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
@@ -45,7 +47,7 @@
# CONFIG_INITRAMFS_SOURCE is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
+CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
@@ -53,7 +55,7 @@
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
-CONFIG_ELF_CORE=y
+# CONFIG_ELF_CORE is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -73,7 +75,7 @@
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
#
# Block layer
@@ -88,7 +90,7 @@
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
@@ -168,8 +170,9 @@
# CONFIG_MACH_TUNGE2 is not set
# CONFIG_MACH_T3XSCALE is not set
CONFIG_MACH_XSCALE_PALMTT5=y
-CONFIG_PALMTT5_PM=y
-CONFIG_PALMTT5_BATTERY=m
+# CONFIG_PALMT5_DEBUG is not set
+CONFIG_PALMT5_BATTERY=m
+CONFIG_PALMT5_PM=y
# CONFIG_MACH_XSCALE_PALMTX is not set
# CONFIG_MACH_PALMZ72 is not set
# CONFIG_MACH_OMAP_PALMTC is not set
@@ -222,21 +225,12 @@
#
# PCCARD (PCMCIA/CardBus) support
#
-CONFIG_PCCARD=m
-CONFIG_PCMCIA_DEBUG=y
-CONFIG_PCMCIA=m
-# CONFIG_PCMCIA_LOAD_CIS is not set
-CONFIG_PCMCIA_IOCTL=y
+# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-CONFIG_PCMCIA_PXA2XX=m
-
-#
# Kernel Features
#
-# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT=y
# CONFIG_NO_IDLE_HZ is not set
CONFIG_HZ=100
CONFIG_AEABI=y
@@ -288,7 +282,7 @@
# Power management options
#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
+CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
# CONFIG_DPM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not set
@@ -303,13 +297,13 @@
# Networking options
#
# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
+CONFIG_PACKET=m
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_NET_KEY=y
+# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
@@ -324,9 +318,9 @@
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -380,10 +374,10 @@
#
# IrDA protocols
#
-CONFIG_IRLAN=y
-CONFIG_IRNET=y
-CONFIG_IRCOMM=y
-CONFIG_IRDA_ULTRA=y
+# CONFIG_IRLAN is not set
+# CONFIG_IRNET is not set
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
#
# IrDA options
@@ -419,31 +413,20 @@
#
CONFIG_PXA_FICP=y
CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-# CONFIG_BT_BNEP_MC_FILTER is not set
-# CONFIG_BT_BNEP_PROTO_FILTER is not set
-# CONFIG_BT_HIDP is not set
+# CONFIG_BT_L2CAP is not set
+# CONFIG_BT_SCO is not set
#
# Bluetooth device drivers
#
CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
+# CONFIG_BT_HCIUART_H4 is not set
# CONFIG_BT_HCIUART_BCSP is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBTUART is not set
# CONFIG_BT_HCIVHCI is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
-# CONFIG_IEEE80211_CRYPT_CCMP is not set
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
+CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_SOFTMAC=m
# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
CONFIG_WIRELESS_EXT=y
@@ -457,7 +440,7 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
+# CONFIG_FW_LOADER is not set
# CONFIG_SYS_HYPERVISOR is not set
#
@@ -468,87 +451,9 @@
#
# Memory Technology Devices (MTD)
#
-CONFIG_MTD=m
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
+# CONFIG_MTD is not set
#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=m
-CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=m
-CONFIG_MTD_CFI_AMDSTD=m
-CONFIG_MTD_CFI_STAA=m
-CONFIG_MTD_CFI_UTIL=m
-CONFIG_MTD_RAM=m
-CONFIG_MTD_ROM=m
-CONFIG_MTD_ABSENT=m
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
# Parallel port support
#
# CONFIG_PARPORT is not set
@@ -575,31 +480,9 @@
#
# ATA/ATAPI/MFM/RLL support
#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
+# CONFIG_IDE is not set
#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
@@ -641,11 +524,16 @@
#
# PHY device support
#
+# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
-# CONFIG_NET_ETHERNET is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_SMC911X is not set
#
# Ethernet (1000 Mbit)
@@ -662,54 +550,18 @@
#
# Wireless LAN (non-hamradio)
#
-CONFIG_NET_RADIO=y
-# CONFIG_NET_WIRELESS_RTNETLINK is not set
+# CONFIG_NET_RADIO is not set
#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_PCMCIA_WAVELAN is not set
-# CONFIG_PCMCIA_NETWAVE is not set
-
-#
-# Wireless 802.11 Frequency Hopping cards support
-#
-# CONFIG_PCMCIA_RAYCS is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-CONFIG_LIBERTAS=y
-CONFIG_LIBERTAS_CS=m
-CONFIG_LIBERTAS_DEBUG=y
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
-#
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_ACX is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# PCMCIA network device support
-#
-# CONFIG_NET_PCMCIA is not set
-
-#
# Wan interfaces
#
# CONFIG_WAN is not set
CONFIG_PPP=y
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=y
-CONFIG_PPP_SYNC_TTY=y
-CONFIG_PPP_DEFLATE=y
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPP_MPPE is not set
# CONFIG_PPPOE is not set
@@ -734,10 +586,7 @@
#
# Userland interfaces
#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_TSDEV=y
CONFIG_INPUT_TSDEV_SCREEN_X=320
@@ -760,6 +609,7 @@
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
@@ -782,6 +632,7 @@
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
@@ -797,11 +648,7 @@
#
# Serial drivers
#
-CONFIG_SERIAL_8250=m
-# CONFIG_SERIAL_8250_CS is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
@@ -827,16 +674,9 @@
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=m
# CONFIG_NVRAM is not set
-CONFIG_SA1100_RTC=y
+CONFIG_SA1100_RTC=m
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
# CONFIG_RAW_DRIVER is not set
#
@@ -852,10 +692,20 @@
#
# SPI support
#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_PXA2XX=y
+
+#
+# SPI Protocol Masters
+#
+
+#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
@@ -907,7 +757,8 @@
#
# LED devices
#
-# CONFIG_NEW_LEDS is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
#
# LED drivers
@@ -916,13 +767,38 @@
#
# LED Triggers
#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+# CONFIG_LEDS_TRIGGER_HWTIMER is not set
+CONFIG_LEDS_TRIGGER_MMC_CARD=y
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_SHARED is not set
#
# Multimedia devices
#
-# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_VIDEO_V4L2=y
#
+# Video Capture Adapters
+#
+
+#
+# Video Capture Adapters
+#
+CONFIG_VIDEO_ADV_DEBUG=y
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+
+#
+# Radio Adapters
+#
+
+#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
@@ -938,11 +814,11 @@
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
-CONFIG_FB_TILEBLITTING=y
+# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_IMAGEON is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
+CONFIG_FB_PXA_PARAMETERS=y
# CONFIG_FB_MBX is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_VSFB is not set
@@ -953,7 +829,7 @@
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
# CONFIG_FONT_8x16 is not set
@@ -969,45 +845,44 @@
#
# Logo configuration
#
-# CONFIG_LOGO is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=m
-CONFIG_LCD_DEVICE=y
+# CONFIG_LCD_CLASS_DEVICE is not set
# CONFIG_BACKLIGHT_CORGI is not set
-CONFIG_BACKLIGHT_PXAPWM=m
+CONFIG_BACKLIGHT_PXAPWM=y
#
# Sound
#
-CONFIG_SOUND=m
+CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_SEQUENCER=m
-# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
-CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
-CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
@@ -1016,16 +891,10 @@
# ALSA ARM devices
#
# CONFIG_SND_PXA2xx_I2SOUND is not set
-CONFIG_SND_PXA2XX_PCM=m
-CONFIG_SND_PXA2XX_AC97=m
+CONFIG_SND_PXA2XX_PCM=y
+CONFIG_SND_PXA2XX_AC97=y
#
-# PCMCIA devices
-#
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
-
-#
# SoC audio support
#
# CONFIG_SND_SOC is not set
@@ -1034,7 +903,7 @@
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
+CONFIG_AC97_BUS=y
#
# HID Devices
@@ -1056,14 +925,15 @@
#
# USB Gadget Support
#
-CONFIG_USB_GADGET=m
+CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-CONFIG_USB_GADGET_SX2=y
-CONFIG_USB_SX2=m
+CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
+# CONFIG_USB_PXA27X_DMA is not set
+# CONFIG_USB_GADGET_SX2 is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_MQ11XX is not set
# CONFIG_USB_GADGET_LH7A40X is not set
@@ -1072,8 +942,9 @@
# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
# CONFIG_USB_GADGET_DUALSPEED is not set
-CONFIG_USB_ZERO=m
-# CONFIG_USB_ETH is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=m
+# CONFIG_USB_ETH_RNDIS is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
@@ -1095,10 +966,30 @@
# Real Time Clock
#
CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_CLASS=m
CONFIG_RTC_EPOCH=1970
#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=m
+CONFIG_RTC_INTF_PROC=m
+CONFIG_RTC_INTF_DEV=m
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_SA1100=m
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
# File systems
#
CONFIG_EXT2_FS=y
@@ -1112,14 +1003,13 @@
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=y
+# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
+# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
#
@@ -1160,9 +1050,11 @@
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_SQUASHFS_VMALLOC is not set
# CONFIG_SQUASHFS_LZMA is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
@@ -1174,14 +1066,14 @@
#
# Network File Systems
#
-CONFIG_NFS_FS=y
+CONFIG_NFS_FS=m
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
+CONFIG_LOCKD=m
CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
+CONFIG_SUNRPC=m
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1201,44 +1093,44 @@
# Native Language Support
#
CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf-8"
+CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=y
-CONFIG_NLS_CODEPAGE_775=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_CODEPAGE_852=y
-CONFIG_NLS_CODEPAGE_855=y
-CONFIG_NLS_CODEPAGE_857=y
-CONFIG_NLS_CODEPAGE_860=y
-CONFIG_NLS_CODEPAGE_861=y
-CONFIG_NLS_CODEPAGE_862=y
-CONFIG_NLS_CODEPAGE_863=y
-CONFIG_NLS_CODEPAGE_864=y
-CONFIG_NLS_CODEPAGE_865=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
CONFIG_NLS_CODEPAGE_866=y
-CONFIG_NLS_CODEPAGE_869=y
+# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
-CONFIG_NLS_ISO8859_8=y
-CONFIG_NLS_CODEPAGE_1250=y
-CONFIG_NLS_CODEPAGE_1251=y
-CONFIG_NLS_ASCII=y
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
-CONFIG_NLS_ISO8859_3=y
-CONFIG_NLS_ISO8859_4=y
-CONFIG_NLS_ISO8859_5=y
-CONFIG_NLS_ISO8859_6=y
-CONFIG_NLS_ISO8859_7=y
-CONFIG_NLS_ISO8859_9=y
-CONFIG_NLS_ISO8859_13=y
-CONFIG_NLS_ISO8859_14=y
-CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
CONFIG_NLS_KOI8_R=y
-CONFIG_NLS_KOI8_U=y
+# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
#
@@ -1263,7 +1155,7 @@
# CONFIG_SMALLOOPS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_USER is not set
@@ -1298,7 +1190,7 @@
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
+CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
@@ -1323,6 +1215,5 @@
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
CONFIG_IOMAP_COPY=y
Modified: linux4palm/linux/trunk/arch/arm/mach-pxa/palmt5/Kconfig
===================================================================
--- linux4palm/linux/trunk/arch/arm/mach-pxa/palmt5/Kconfig 2007-04-17 21:02:47 UTC (rev 956)
+++ linux4palm/linux/trunk/arch/arm/mach-pxa/palmt5/Kconfig 2007-04-18 10:12:50 UTC (rev 957)
@@ -1,24 +1,29 @@
menuconfig MACH_XSCALE_PALMTT5
- bool "Palm T5"
- select PXA27x
- select KEYBOARD_PXA27x
- help
- This enables support for PalmOme T5 handheld.
+ bool "Palm T5"
+ select PXA27x
+ help
+ This enables support for Palm T5 handheld.
-config PALMTT5_PM
- tristate "Palm Tungsten T5 Power Management support"
+config PALMT5_DEBUG
+ bool "Debug output for Palm T5"
depends on MACH_XSCALE_PALMTT5
- default y if MACH_XSCALE_PALMTT5
+ default n
help
- Enable support for suspend/resume the PalmOne Tungsten T5 PDA.
-
-config PALMTT5_BATTERY
- tristate "Palm T5 AC97 driver"
- depends on MACH_XSCALE_PALMTT5
- select TOUCHSCREEN_WM97XX
+ Enable core debug output for Palm T5 modules.
+
+config PALMT5_BATTERY
+ tristate "Palm T5 Battery support"
+ select TOUCHSCREEN_WM97XX
+ depends on MACH_XSCALE_PALMTT5
default m
help
- Enable support for PalmOne Tungsten T5 battery to APM.
+ Enable support for Palm T5 battery to APM.
ATM use it only as module, otherwise it hangs.
+
+config PALMT5_PM
+ tristate "Palm T5 Power Management support"
+ depends on MACH_XSCALE_PALMTT5
+ default y if MACH_PALMTT5
+ help
+ Enable support for suspend/resume the Palm T5 PDA.
-
Modified: linux4palm/linux/trunk/arch/arm/mach-pxa/palmt5/Makefile
===================================================================
--- linux4palm/linux/trunk/arch/arm/mach-pxa/palmt5/Makefile 2007-04-17 21:02:47 UTC (rev 956)
+++ linux4palm/linux/trunk/arch/arm/mach-pxa/palmt5/Makefile 2007-04-18 10:12:50 UTC (rev 957)
@@ -1,9 +1,7 @@
#
-# Palm Tungsten T5 Linux kernel Makefile
+## Palm T5 Linux kernel Makefile
#
-
+#
obj-$(CONFIG_MACH_XSCALE_PALMTT5) += palmt5.o
-obj-$(CONFIG_PALMTT5_PM) += palmt5_pm.o
-obj-$(CONFIG_PALMTT5_BATTERY) += palmt5_battery.o
-
-
+obj-$(CONFIG_PALMT5_BATTERY) += palmt5_battery.o
+obj-$(CONFIG_PM) += palmt5_pm.o
Deleted: linux4palm/linux/trunk/arch/arm/mach-pxa/palmt5/palmld_ac97.c
===================================================================
Modified: linux4palm/linux/trunk/arch/arm/mach-pxa/palmt5/palmt5_pm.c
===================================================================
--- linux4palm/linux/trunk/arch/arm/mach-pxa/palmt5/palmt5_pm.c 2007-04-17 21:02:47 UTC (rev 956)
+++ linux4palm/linux/trunk/arch/arm/mach-pxa/palmt5/palmt5_pm.c 2007-04-18 10:12:50 UTC (rev 957)
@@ -19,11 +19,11 @@
#include <asm/arch/hardware.h>
#include <asm/arch/pxa-regs.h>
-#include <asm/arch/palmtx-gpio.h>
+#include <asm/arch/palmt5-gpio.h>
#include <asm/arch/pxa27x_keyboard.h>
#ifdef CONFIG_PM
-static int palmtx_suspend(struct device *dev, pm_message_t state)
+static int palmt5_suspend(struct device *dev, pm_message_t state)
{
/* Wake-Up on RTC event, etc. */
PWER |= PWER_RTC | PWER_WEP1 ;
@@ -42,11 +42,11 @@
{}
/* Turn off LCD power */
- SET_PALMTX_GPIO(LCD_POWER,0);
+/* SET_PALMTT5_GPIO(LCD_POWER,0);*/
/* Turn screen off */
- SET_PALMTX_GPIO(BL_POWER,0);
+/* SET_PALMTT5_GPIO(BL_POWER,0);*/
/* Turn off USB power */
- SET_PALMTX_GPIO(USB_POWER,0);
+/* SET_PALMTT5_GPIO(USB_POWER,0);*/
/* disable GPIO reset - DO NOT REMOVE!!!!!!!! Palm totally hangs on reset without disabling GPIO reset during sleep */
@@ -55,7 +55,7 @@
return 0;
}
-static int palmtx_resume(struct device *dev)
+static int palmt5_resume(struct device *dev)
{
/* Disabled Deep-Sleep mode */
@@ -65,65 +65,65 @@
PCFR |= PCFR_GPR_EN; /* !! DO NOT REMOVE !! THIS IS NECCESARY FOR ENABLE PALM RESET !! */
- /* Here are all of special to resume Palm TX */
+ /* Here are all of special to resume Palm T5 */
/* Turn on LCD power */
- SET_PALMTX_GPIO(LCD_POWER,1);
+/* SET_PALMTT5_GPIO(LCD_POWER,1);*/
/* Turn screen on */
- SET_PALMTX_GPIO(BL_POWER,1);
+/* SET_PALMTT5_GPIO(BL_POWER,1);*/
/* Turn on USB power */
- SET_PALMTX_GPIO(USB_POWER,1);
+/* SET_PALMTT5_GPIO(USB_POWER,1);*/
return 0;
}
#else
-#define palmtx_suspend NULL
-#define palmtx_resume NULL
+#define palmt5_suspend NULL
+#define palmt5_resume NULL
#endif
-static void palmtx_pxa_ll_pm_suspend(unsigned long resume_addr)
+static void palmt5_pxa_ll_pm_suspend(unsigned long resume_addr)
{
/* For future */
return;
}
-static void palmtx_pxa_ll_pm_resume(void)
+static void palmt5_pxa_ll_pm_resume(void)
{
/* For future */
}
-struct pxa_ll_pm_ops palmtx_ll_pm_ops = {
- .suspend = palmtx_pxa_ll_pm_suspend,
- .resume = palmtx_pxa_ll_pm_resume,
+struct pxa_ll_pm_ops palmt5_ll_pm_ops = {
+ .suspend = palmt5_pxa_ll_pm_suspend,
+ .resume = palmt5_pxa_ll_pm_resume,
};
-static int palmtx_pm_probe(struct device *dev)
+static int palmt5_pm_probe(struct device *dev)
{
- printk(KERN_NOTICE "Palm TX power management driver registered\n");
+ printk(KERN_NOTICE "Palm T5 power management driver registered\n");
return 0;
}
-struct device_driver palmtx_pm_driver = {
- .name = "palmtx-pm",
+struct device_driver palmt5_pm_driver = {
+ .name = "palmt5-pm",
.bus = &platform_bus_type,
- .probe = palmtx_pm_probe,
- .suspend = palmtx_suspend,
- .resume = palmtx_resume,
+ .probe = palmt5_pm_probe,
+ .suspend = palmt5_suspend,
+ .resume = palmt5_resume,
};
-static int __init palmtx_pm_init(void)
+static int __init palmt5_pm_init(void)
{
- return driver_register(&palmtx_pm_driver);
+ return driver_register(&palmt5_pm_driver);
}
-static void __exit palmtx_pm_exit(void)
+static void __exit palmt5_pm_exit(void)
{
- driver_unregister(&palmtx_pm_driver);
+ driver_unregister(&palmt5_pm_driver);
}
-module_init(palmtx_pm_init);
-module_exit(palmtx_pm_exit);
+module_init(palmt5_pm_init);
+module_exit(palmt5_pm_exit);
-MODULE_AUTHOR("Jan Herman <2h...@se...>");
-MODULE_DESCRIPTION("Palm TX power management driver");
+MODULE_AUTHOR("Marek Vasut <mar...@gm...>");
+MODULE_DESCRIPTION("Palm T5 power management driver");
MODULE_LICENSE("GPL");
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <med...@us...> - 2007-06-08 13:50:37
|
Revision: 1025
http://svn.sourceforge.net/hackndev/?rev=1025&view=rev
Author: medaglia
Date: 2007-06-08 06:50:34 -0700 (Fri, 08 Jun 2007)
Log Message:
-----------
Added defconfig for palmte2 and some minor cleanings.
Modified Paths:
--------------
linux4palm/linux/trunk/arch/arm/configs/palmte2_defconfig
linux4palm/linux/trunk/arch/arm/mach-pxa/palmte2/Kconfig
linux4palm/linux/trunk/arch/arm/mach-pxa/palmte2/palmte2.c
Modified: linux4palm/linux/trunk/arch/arm/configs/palmte2_defconfig
===================================================================
--- linux4palm/linux/trunk/arch/arm/configs/palmte2_defconfig 2007-06-06 22:01:45 UTC (rev 1024)
+++ linux4palm/linux/trunk/arch/arm/configs/palmte2_defconfig 2007-06-08 13:50:34 UTC (rev 1025)
@@ -1,13 +1,27 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-hnd0
-# Wed May 10 01:16:02 2006
+# Linux kernel version: 2.6.21-hnd1
+# Fri Jun 8 23:44:41 2007
#
CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
@@ -23,18 +37,28 @@
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_SYSCTL is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
-# CONFIG_MINIMAL_OOPS is not set
-CONFIG_INITRAMFS_SOURCE=""
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="/home/palm/initrd/initramfs"
+CONFIG_INITRAMFS_ROOT_UID=0
+CONFIG_INITRAMFS_ROOT_GID=0
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
@@ -42,13 +66,9 @@
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
-CONFIG_USELIB=y
-CONFIG_CORE_DUMP=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
@@ -61,33 +81,50 @@
#
# Block layer
#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_DEFAULT_IOSCHED="cfq"
#
# System Type
#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
@@ -95,49 +132,61 @@
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_BOARD_IRQ_MAP_SMALL is not set
+# CONFIG_BOARD_IRQ_MAP_BIG is not set
#
# Intel PXA2xx Implementations
#
# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
# CONFIG_MACH_MAINSTONE is not set
# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_TOSHIBA_TMIO_OHCI is not set
# CONFIG_ARCH_ESERIES is not set
# CONFIG_MACH_A620 is not set
# CONFIG_MACH_A716 is not set
+# CONFIG_MACH_A730 is not set
# CONFIG_ARCH_H1900 is not set
# CONFIG_ARCH_H2200 is not set
-# CONFIG_ARCH_H3900 is not set
+# CONFIG_MACH_H3900 is not set
# CONFIG_MACH_H4000 is not set
# CONFIG_MACH_H4700 is not set
# CONFIG_MACH_HX2750 is not set
# CONFIG_ARCH_H5400 is not set
# CONFIG_MACH_HIMALAYA is not set
+# CONFIG_MACH_HTCUNIVERSAL is not set
+# CONFIG_MACH_HTCALPINE is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_HTCAPACHE is not set
+# CONFIG_MACH_BLUEANGEL is not set
+# CONFIG_MACH_HTCBEETLES is not set
+# CONFIG_MACH_HW6900 is not set
+# CONFIG_MACH_HTCATHENA is not set
+# CONFIG_ARCH_AXIMX3 is not set
# CONFIG_ARCH_AXIMX5 is not set
-# CONFIG_ARCH_AXIMX3 is not set
+# CONFIG_MACH_X50 is not set
# CONFIG_ARCH_ROVERP1 is not set
# CONFIG_ARCH_ROVERP5P is not set
# CONFIG_MACH_XSCALE_PALMLD is not set
+# CONFIG_MACH_XSCALE_PALMTREO650 is not set
+# CONFIG_MACH_XSCALE_TREO680 is not set
+# CONFIG_MACH_T700WX is not set
CONFIG_MACH_TUNGE2=y
-CONFIG_PALMTE2_BUTTONS=y
-CONFIG_PALMTE2_AC97=y
+# CONFIG_PALMTE2_BUTTONS is not set
+# CONFIG_PALMTE2_AC97 is not set
# CONFIG_GPIOD is not set
# CONFIG_MACH_T3XSCALE is not set
# CONFIG_MACH_XSCALE_PALMTT5 is not set
# CONFIG_MACH_XSCALE_PALMTX is not set
# CONFIG_MACH_PALMZ72 is not set
# CONFIG_MACH_OMAP_PALMTC is not set
+# CONFIG_MACH_ZIRE31 is not set
+# CONFIG_GPIOED is not set
+# CONFIG_GPIOEDNG is not set
# CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_TRIZEPS4 is not set
CONFIG_PXA25x=y
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
#
# Linux As Bootloader
@@ -153,27 +202,20 @@
CONFIG_CPU_ABRT_EV5T=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
#
# Processor Features
#
CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+# CONFIG_IWMMXT is not set
+# CONFIG_ARMBOOT_PROC is not set
CONFIG_XSCALE_PMU=y
#
-# Compaq/iPAQ Platforms
-#
-
-#
-# Compaq/iPAQ Drivers
-#
-
-#
-# Compaq/HP iPAQ Drivers
-#
-# CONFIG_IPAQ_HAMCOP is not set
-
-#
# Bus support
#
@@ -186,8 +228,10 @@
# Kernel Features
#
# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
-# CONFIG_AEABI is not set
+CONFIG_NO_IDLE_HZ=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
@@ -197,15 +241,19 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
CONFIG_ALIGNMENT_TRAP=y
#
# Boot options
#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE="mem=16m root=/dev/mmcblk0p2 init=/sbin/init rw rootfstype=ext2"
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+# CONFIG_TXTOFFSET_DELTA is not set
#
# CPU Frequency scaling
@@ -229,13 +277,11 @@
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
#
# Power management options
#
# CONFIG_PM is not set
-# CONFIG_APM is not set
#
# Networking
@@ -247,8 +293,12 @@
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
+CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@@ -262,12 +312,21 @@
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
#
@@ -293,7 +352,6 @@
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -307,49 +365,7 @@
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
-CONFIG_IRDA=y
-
-#
-# IrDA protocols
-#
-# CONFIG_IRLAN is not set
-CONFIG_IRCOMM=y
-CONFIG_IRDA_ULTRA=y
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-CONFIG_IRDA_DEBUG=y
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-CONFIG_IRTTY_SIR=y
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-CONFIG_PXA_FICP=y
+# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
@@ -363,6 +379,7 @@
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
@@ -382,15 +399,19 @@
#
# Plug and Play support
#
+# CONFIG_PNPACPI is not set
#
# Block devices
#
# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
@@ -404,8 +425,14 @@
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
@@ -427,31 +454,6 @@
# Network device support
#
# CONFIG_NETDEVICES is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -464,11 +466,15 @@
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
#
-# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_TSDEV=y
CONFIG_INPUT_TSDEV_SCREEN_X=320
@@ -479,13 +485,7 @@
#
# Input Device Drivers
#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_KEYBOARD_PALMIR=y
+# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TOUCHSCREEN=y
@@ -493,7 +493,16 @@
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_WM97XX is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_PALMTC is not set
+CONFIG_TOUCHSCREEN_WM97XX=y
+# CONFIG_TOUCHSCREEN_WM9705 is not set
+CONFIG_TOUCHSCREEN_WM9712=y
+# CONFIG_TOUCHSCREEN_WM9713 is not set
+# CONFIG_TOUCHSCREEN_WM97XX_PXA is not set
# CONFIG_INPUT_MISC is not set
#
@@ -508,6 +517,7 @@
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -518,31 +528,12 @@
#
# Non-8250 serial port support
#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_PXA_COUNT=4
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PXA is not set
+# CONFIG_RS232_SERIAL is not set
CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_LEGACY_PTYS is not set
#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# L3 serial bus support
-#
-# CONFIG_L3 is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-
-#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
@@ -551,23 +542,25 @@
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_SA1100_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
+# CONFIG_TIHTC is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
# SPI support
#
# CONFIG_SPI is not set
@@ -585,28 +578,53 @@
# CONFIG_HWMON_VID is not set
#
-# SoC drivers
+# Hardware Monitoring - external power and batteries
#
+# CONFIG_EXTERNAL_POWER is not set
+# CONFIG_BATTERY is not set
+
+#
+# L3 serial bus support
+#
+# CONFIG_L3 is not set
+
+#
+# Misc devices
+#
+# CONFIG_BATTCHARGE_MONITOR is not set
+
+#
+# Multimedia Capabilities Port drivers
+#
+# CONFIG_ADC is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_ASIC2 is not set
+# CONFIG_HTC_ASIC3 is not set
+# CONFIG_HTC_ASIC3_DS1WM is not set
+# CONFIG_SOC_SAMCOP is not set
+# CONFIG_SOC_HAMCOP is not set
# CONFIG_SOC_MQ11XX is not set
# CONFIG_SOC_T7L66XB is not set
# CONFIG_SOC_TC6387XB is not set
# CONFIG_SOC_TC6393XB is not set
-# CONFIG_HTC_ASIC2 is not set
-# CONFIG_HTC_ASIC3 is not set
# CONFIG_SOC_TSC2101 is not set
+# CONFIG_SOC_TSC2200 is not set
#
-# Misc devices
+# LED devices
#
-CONFIG_BATTERY_MONITOR=y
+# CONFIG_NEW_LEDS is not set
#
-# Multimedia Capabilities Port drivers
+# LED drivers
#
-# CONFIG_MCP is not set
#
-# Multimedia Capabilities Port drivers
+# LED Triggers
#
#
@@ -622,18 +640,33 @@
#
# Graphics support
#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_PXAPWM=y
CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
# CONFIG_FB_IMAGEON is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_PXA=y
# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_VSFB is not set
#
# Console display driver support
@@ -653,7 +686,6 @@
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -667,11 +699,11 @@
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
@@ -679,7 +711,6 @@
# Generic devices
#
CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_AC97_BUS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
@@ -688,19 +719,32 @@
#
# ALSA ARM devices
#
+CONFIG_SND_PXA2xx_I2SOUND=y
CONFIG_SND_PXA2XX_PCM=y
CONFIG_SND_PXA2XX_AC97=y
#
+# SoC audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
#
+# HID Devices
+#
+# CONFIG_HID is not set
+
+#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB is not set
#
@@ -719,15 +763,15 @@
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_BLOCK=y
CONFIG_MMC_PXA=y
-# CONFIG_MMC_WBSD_PALMT3 is not set
# CONFIG_MMC_TMIO is not set
# CONFIG_MMC_SAMCOP is not set
-# CONFIG_MMC_ASIC3 is not set
#
-# LED devices
+# Real Time Clock
#
-# CONFIG_CLASS_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_EPOCH=1970
#
# File systems
@@ -736,16 +780,19 @@
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
+CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -759,19 +806,23 @@
#
# DOS/FAT/NT Filesystems
#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
@@ -786,6 +837,7 @@
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
+# CONFIG_SQUASHFS_LZMA is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
@@ -816,7 +868,7 @@
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
+CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
@@ -840,7 +892,7 @@
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
+CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
@@ -856,6 +908,11 @@
# CONFIG_NLS_UTF8 is not set
#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
# Profiling support
#
# CONFIG_PROFILING is not set
@@ -864,10 +921,15 @@
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_SMALLOOPS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_USER is not set
@@ -883,13 +945,13 @@
# CONFIG_CRYPTO is not set
#
-# Hardware crypto devices
-#
-
-#
# Library routines
#
-CONFIG_CRC_CCITT=y
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
Modified: linux4palm/linux/trunk/arch/arm/mach-pxa/palmte2/Kconfig
===================================================================
--- linux4palm/linux/trunk/arch/arm/mach-pxa/palmte2/Kconfig 2007-06-06 22:01:45 UTC (rev 1024)
+++ linux4palm/linux/trunk/arch/arm/mach-pxa/palmte2/Kconfig 2007-06-08 13:50:34 UTC (rev 1025)
@@ -3,30 +3,3 @@
select PXA25x
help
This enables support for Palm Tungsten E2 handheld.
-
-config PALMTE2_BUTTONS
- tristate "Palm Tungsten E2 buttons driver"
- depends on MACH_TUNGE2
- default y
- help
- This driver translates button presses on a Palm
- Tungsten E2 to Linux input subsystem events.
-
-config PALMTE2_AC97
- tristate "Palm Tungsten E2 AC97"
- depends on MACH_TUNGE2
- default y
- help
- This driver handles the WM9712L AC97 codec,
- which is used to support the touchscreen
- and battery level monitor.
-
-config GPIOD
- tristate "GPIOD"
- depends on MACH_TUNGE2
- default n
- help
- GPIOD
- This is used only for debugging and development.
-
- If unsure, choose N.
Modified: linux4palm/linux/trunk/arch/arm/mach-pxa/palmte2/palmte2.c
===================================================================
--- linux4palm/linux/trunk/arch/arm/mach-pxa/palmte2/palmte2.c 2007-06-06 22:01:45 UTC (rev 1024)
+++ linux4palm/linux/trunk/arch/arm/mach-pxa/palmte2/palmte2.c 2007-06-08 13:50:34 UTC (rev 1025)
@@ -25,7 +25,6 @@
#include <asm/arch/pxa-dmabounce.h>
#include <asm/arch/pxafb.h>
#include <asm/arch/pxa-regs.h>
-//#include <asm/arch/pxa_keys.h>
#include <asm/arch/udc.h>
#include <asm/arch/irda.h>
#include <asm/arch/mmc.h>
@@ -39,7 +38,6 @@
#include <sound/ac97_codec.h>
#include "../generic.h"
-//#include "../drivers/serial/pxa-serial.h"
#define DEBUG
@@ -230,7 +228,7 @@
}
MACHINE_START(TUNGE2, "Palm Tungsten E2")
- /* Maintainer: Carlos E. Medaglia Dyonisio <ca...@ne...> */
+ Maintainer: Carlos E. Medaglia Dyonisio <ca...@ne...>
//.phys_ram = 0xa0000000,
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <ph...@us...> - 2007-07-13 13:07:28
|
Revision: 1139
http://svn.sourceforge.net/hackndev/?rev=1139&view=rev
Author: phiren
Date: 2007-07-13 06:07:24 -0700 (Fri, 13 Jul 2007)
Log Message:
-----------
palmz31: updated defconfig for 2.6.21, command line is now passed from
bootloader to kernel
Modified Paths:
--------------
linux4palm/linux/trunk/arch/arm/configs/palmz31_defconfig
linux4palm/linux/trunk/arch/arm/mach-pxa/palmz31/palmz31.c
Modified: linux4palm/linux/trunk/arch/arm/configs/palmz31_defconfig
===================================================================
--- linux4palm/linux/trunk/arch/arm/configs/palmz31_defconfig 2007-07-13 13:00:37 UTC (rev 1138)
+++ linux4palm/linux/trunk/arch/arm/configs/palmz31_defconfig 2007-07-13 13:07:24 UTC (rev 1139)
@@ -1,11 +1,14 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-hnd0
-# Thu Feb 22 12:26:56 2007
+# Linux kernel version: 2.6.21-hnd2
+# Sat Jul 14 00:59:10 2007
#
CONFIG_ARM=y
-# CONFIG_GENERIC_TIME is not set
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
@@ -15,6 +18,7 @@
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -24,6 +28,7 @@
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
@@ -41,29 +46,26 @@
# CONFIG_IKCONFIG is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE="usr/zire31mmc"
-CONFIG_INITRAMFS_ROOT_UID=1000
-CONFIG_INITRAMFS_ROOT_GID=1000
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_UID16 is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
-CONFIG_ELF_CORE=y
+# CONFIG_ELF_CORE is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-CONFIG_SHMEM=y
+# CONFIG_SHMEM is not set
# CONFIG_SLAB is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
+CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
CONFIG_SLOB=y
@@ -122,6 +124,7 @@
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
# CONFIG_ARCH_RPC is not set
@@ -130,6 +133,8 @@
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
+# CONFIG_BOARD_IRQ_MAP_SMALL is not set
+# CONFIG_BOARD_IRQ_MAP_BIG is not set
#
# Intel PXA2xx Implementations
@@ -158,14 +163,13 @@
# CONFIG_MACH_BLUEANGEL is not set
# CONFIG_MACH_HTCBEETLES is not set
# CONFIG_MACH_HW6900 is not set
+# CONFIG_MACH_HTCATHENA is not set
# CONFIG_ARCH_AXIMX3 is not set
# CONFIG_ARCH_AXIMX5 is not set
# CONFIG_MACH_X50 is not set
# CONFIG_ARCH_ROVERP1 is not set
# CONFIG_ARCH_ROVERP5P is not set
# CONFIG_MACH_XSCALE_PALMLD is not set
-# CONFIG_GPIOED is not set
-# CONFIG_GPIOEDNG is not set
# CONFIG_MACH_XSCALE_PALMTREO650 is not set
# CONFIG_MACH_XSCALE_TREO680 is not set
# CONFIG_MACH_T700WX is not set
@@ -177,10 +181,13 @@
# CONFIG_MACH_OMAP_PALMTC is not set
CONFIG_MACH_ZIRE31=y
CONFIG_PALMZ31_BUTTONS=y
+# CONFIG_GPIOED is not set
+# CONFIG_GPIOEDNG is not set
+# CONFIG_MACH_GHI270HG is not set
+# CONFIG_MACH_GHI270 is not set
# CONFIG_PXA_SHARPSL is not set
# CONFIG_MACH_TRIZEPS4 is not set
CONFIG_PXA25x=y
-CONFIG_PXA_RTC_EPOCH=1970
#
# Linux As Bootloader
@@ -202,22 +209,14 @@
#
# Processor Features
#
-# CONFIG_ARM_THUMB is not set
+CONFIG_ARM_THUMB=y
# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
# CONFIG_IWMMXT is not set
# CONFIG_ARMBOOT_PROC is not set
CONFIG_XSCALE_PMU=y
-# CONFIG_KEXEC is not set
#
-# Compaq/iPAQ Drivers
-#
-
-#
-# Compaq/HP iPAQ Drivers
-#
-
-#
# Bus support
#
@@ -229,10 +228,11 @@
#
# Kernel Features
#
-# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
+CONFIG_PREEMPT=y
+CONFIG_NO_IDLE_HZ=y
CONFIG_HZ=100
-# CONFIG_AEABI is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
@@ -243,6 +243,7 @@
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
CONFIG_ALIGNMENT_TRAP=y
#
@@ -252,6 +253,8 @@
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=16m init=/linuxrc"
# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+# CONFIG_TXTOFFSET_DELTA is not set
#
# CPU Frequency scaling
@@ -265,9 +268,8 @@
#
# At least one emulation must be selected
#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
+# CONFIG_FPE_NWFPE is not set
+CONFIG_FPE_FASTFPE=y
#
# Userspace binary formats
@@ -275,13 +277,11 @@
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
#
# Power management options
#
# CONFIG_PM is not set
-# CONFIG_APM is not set
#
# Networking
@@ -294,9 +294,6 @@
# CONFIG_NETDEBUG is not set
# CONFIG_PACKET is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@@ -312,9 +309,9 @@
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
@@ -376,7 +373,6 @@
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
# CONFIG_SYS_HYPERVISOR is not set
#
@@ -397,6 +393,7 @@
#
# Plug and Play support
#
+# CONFIG_PNPACPI is not set
#
# Block devices
@@ -405,11 +402,7 @@
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
+# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
@@ -515,6 +508,7 @@
CONFIG_INPUT_TSDEV_SCREEN_Y=160
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_LED_TRIGGER is not set
#
# Input Device Drivers
@@ -531,9 +525,8 @@
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_ADC is not set
-# CONFIG_TOUCHSCREEN_ADC_DEBOUNCE is not set
# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_PALMTC is not set
CONFIG_TOUCHSCREEN_WM97XX=y
# CONFIG_TOUCHSCREEN_WM9705 is not set
CONFIG_TOUCHSCREEN_WM9712=y
@@ -570,6 +563,7 @@
CONFIG_SERIAL_PXA_COUNT=4
# CONFIG_SERIAL_PXA_IR is not set
CONFIG_SERIAL_CORE=y
+# CONFIG_RS232_SERIAL is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
@@ -584,9 +578,9 @@
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
-# CONFIG_SA1100_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
+# CONFIG_TIHTC is not set
# CONFIG_RAW_DRIVER is not set
#
@@ -603,18 +597,18 @@
# SPI support
#
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
-CONFIG_SPI_BITBANG=y
+# CONFIG_SPI_BITBANG is not set
CONFIG_SPI_PXA2XX=y
#
# SPI Protocol Masters
#
+# CONFIG_SPI_AT25 is not set
#
# Dallas's 1-wire bus
@@ -626,32 +620,14 @@
#
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
+# CONFIG_POWER_SUPPLY is not set
#
-# Hardware Monitoring - Battery
-#
-# CONFIG_BATTERY_MONITOR is not set
-
-#
# L3 serial bus support
#
# CONFIG_L3 is not set
#
-# SoC drivers
-#
-# CONFIG_SOC_MQ11XX is not set
-# CONFIG_SOC_T7L66XB is not set
-# CONFIG_SOC_TC6387XB is not set
-# CONFIG_SOC_TC6393XB is not set
-# CONFIG_SOC_SAMCOP is not set
-# CONFIG_SOC_HAMCOP is not set
-# CONFIG_HTC_ASIC2 is not set
-# CONFIG_HTC_ASIC3 is not set
-# CONFIG_HTC_ASIC3_DS1WM is not set
-# CONFIG_SOC_TSC2200 is not set
-
-#
# Misc devices
#
# CONFIG_BATTCHARGE_MONITOR is not set
@@ -659,12 +635,25 @@
#
# Multimedia Capabilities Port drivers
#
-# CONFIG_MCP is not set
-# CONFIG_ADC_ADS7846_SSP is not set
-# CONFIG_ADC_AD7877 is not set
-# CONFIG_TIFM_CORE is not set
+# CONFIG_ADC is not set
#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_ASIC2 is not set
+# CONFIG_HTC_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_ASIC3_DS1WM is not set
+# CONFIG_SOC_SAMCOP is not set
+# CONFIG_SOC_HAMCOP is not set
+# CONFIG_SOC_MQ11XX is not set
+# CONFIG_SOC_T7L66XB is not set
+# CONFIG_SOC_TC6387XB is not set
+# CONFIG_SOC_TC6393XB is not set
+# CONFIG_SOC_TSC2200 is not set
+
+#
# LED devices
#
# CONFIG_NEW_LEDS is not set
@@ -690,15 +679,26 @@
#
# Graphics support
#
-CONFIG_FIRMWARE_EDID=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_PXAPWM=y
CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
# CONFIG_FB_IMAGEON is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_PXA=y
@@ -717,11 +717,11 @@
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
# CONFIG_FONT_8x16 is not set
-CONFIG_FONT_6x11=y
+# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
+CONFIG_FONT_MINI_4x6=y
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
@@ -730,13 +730,6 @@
# Logo configuration
#
# CONFIG_LOGO is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
-CONFIG_BACKLIGHT_PXAPWM=y
#
# Sound
@@ -811,8 +804,9 @@
# CONFIG_USB_GADGET_NET2280 is not set
CONFIG_USB_GADGET_PXA2XX=y
CONFIG_USB_PXA2XX=y
-CONFIG_USB_PXA2XX_SMALL=y
+# CONFIG_USB_PXA2XX_SMALL is not set
# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_SX2 is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_MQ11XX is not set
# CONFIG_USB_GADGET_LH7A40X is not set
@@ -829,6 +823,7 @@
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_CHAR is not set
+# CONFIG_USB_PXA2XX_GPIO is not set
#
# MMC/SD Card support
@@ -837,16 +832,15 @@
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_BLOCK=y
CONFIG_MMC_PXA=y
-# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MMC_TMIO is not set
# CONFIG_MMC_SAMCOP is not set
-# CONFIG_MMC_WBSD_PALMT3 is not set
#
# Real Time Clock
#
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_EPOCH=1970
#
# File systems
@@ -854,14 +848,8 @@
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT3_FS is not set
# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
@@ -910,6 +898,28 @@
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
+CONFIG_AUFS=y
+CONFIG_AUFS_NWKQ_DEF=4
+CONFIG_AUFS_FAKE_DM=y
+CONFIG_AUFS_BRANCH_MAX_127=y
+# CONFIG_AUFS_BRANCH_MAX_511 is not set
+# CONFIG_AUFS_BRANCH_MAX_1023 is not set
+# CONFIG_AUFS_BRANCH_MAX_32767 is not set
+CONFIG_AUFS_SYSAUFS=y
+
+#
+# INOTIFY and AUFS_HINOTIFY are disabled
+#
+
+#
+# EXPORTFS and AUFS_EXPORT are disabled
+#
+
+#
+# NFS_FS and AUFS_LHASH_PATCH are disabled
+#
+# CONFIG_AUFS_DEBUG is not set
+# CONFIG_AUFS_COMPAT is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
@@ -917,6 +927,10 @@
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
+CONFIG_SQUASHFS_LZMA=y
+# CONFIG_SQUASHFS_LZMA_EMBEDDED is not set
+CONFIG_SQUASHFS_LZMA_FRAGMENT_CACHE_SIZE=3
+# CONFIG_SQUASHFS_LZMA_VMALLOC is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
@@ -927,16 +941,8 @@
#
# Network File Systems
#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
@@ -1014,28 +1020,11 @@
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_SMALLOOPS is not set
-CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_RWSEMS is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
#
# Security options
@@ -1056,5 +1045,7 @@
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
Modified: linux4palm/linux/trunk/arch/arm/mach-pxa/palmz31/palmz31.c
===================================================================
--- linux4palm/linux/trunk/arch/arm/mach-pxa/palmz31/palmz31.c 2007-07-13 13:00:37 UTC (rev 1138)
+++ linux4palm/linux/trunk/arch/arm/mach-pxa/palmz31/palmz31.c 2007-07-13 13:07:24 UTC (rev 1139)
@@ -173,6 +173,7 @@
}
MACHINE_START(ZIRE31, "Zire 31")
+ .boot_params = 0xa0000100,
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.map_io = pxa_map_io,
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <hap...@us...> - 2007-07-21 11:47:49
|
Revision: 1192
http://svn.sourceforge.net/hackndev/?rev=1192&view=rev
Author: happy-slapin
Date: 2007-07-21 04:47:19 -0700 (Sat, 21 Jul 2007)
Log Message:
-----------
z72 updates:
* Updated defconfig
All:
* Moved if to case statement in mach-pxa/pxa27x.c so it looks cleaner this way
Modified Paths:
--------------
linux4palm/linux/trunk/arch/arm/configs/palmz72_defconfig
linux4palm/linux/trunk/arch/arm/mach-pxa/pxa27x.c
Modified: linux4palm/linux/trunk/arch/arm/configs/palmz72_defconfig
===================================================================
--- linux4palm/linux/trunk/arch/arm/configs/palmz72_defconfig 2007-07-21 11:16:09 UTC (rev 1191)
+++ linux4palm/linux/trunk/arch/arm/configs/palmz72_defconfig 2007-07-21 11:47:19 UTC (rev 1192)
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.21-hnd2
-# Fri Jun 29 05:00:38 2007
+# Tue Jul 17 01:10:55 2007
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -853,7 +853,6 @@
# CONFIG_SOC_T7L66XB is not set
# CONFIG_SOC_TC6387XB is not set
# CONFIG_SOC_TC6393XB is not set
-# CONFIG_SOC_TSC2101 is not set
# CONFIG_SOC_TSC2200 is not set
#
@@ -915,8 +914,8 @@
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_LCD_CLASS_DEVICE is not set
-# CONFIG_BACKLIGHT_CORGI is not set
-CONFIG_BACKLIGHT_PXAPWM=y
+CONFIG_BACKLIGHT_CORGI=y
+# CONFIG_BACKLIGHT_PXAPWM is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
Modified: linux4palm/linux/trunk/arch/arm/mach-pxa/pxa27x.c
===================================================================
--- linux4palm/linux/trunk/arch/arm/mach-pxa/pxa27x.c 2007-07-21 11:16:09 UTC (rev 1191)
+++ linux4palm/linux/trunk/arch/arm/mach-pxa/pxa27x.c 2007-07-21 11:47:19 UTC (rev 1192)
@@ -138,14 +138,6 @@
{
extern void pxa_cpu_standby(void);
extern void pxa_cpu_suspend(unsigned int);
- if (machine_is_xscale_palmld() || machine_is_xscale_palmtx()
- || machine_is_palmz72() || machine_is_xscale_palmtt5()) {
- /* For safety. suspend_mem puts the device in an unresetable
- * state.
- * On TX one needs to desolder the battery to get out of it.
- */
- if (state == PM_SUSPEND_MEM) state = PM_SUSPEND_STANDBY;
- }
CKEN = CKEN22_MEMC | CKEN9_OSTIMER | CKEN19_KEYPAD;
@@ -160,7 +152,16 @@
pxa_cpu_standby();
break;
case PM_SUSPEND_MEM:
- pxa_cpu_suspend(PWRMODE_SLEEP);
+ if(machine_is_xscale_palmld() || machine_is_xscale_palmtx() ||
+ machine_is_palmz72() || machine_is_xscale_palmtt5()) {
+ /* For safety. suspend_mem puts the device in an unresetable
+ * state.
+ * On TX one needs to desolder the battery to get out of it.
+ */
+ pxa_cpu_standby();
+ } else {
+ pxa_cpu_suspend(PWRMODE_SLEEP);
+ }
break;
}
}
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <z7...@us...> - 2007-09-12 10:10:09
|
Revision: 1306
http://hackndev.svn.sourceforge.net/hackndev/?rev=1306&view=rev
Author: z72ka
Date: 2007-09-12 03:10:03 -0700 (Wed, 12 Sep 2007)
Log Message:
-----------
palmz72: Updated defconfig (added border driver as module, GPIO udc driver), updated USB to GPIO udc driver - better USB initializing
Modified Paths:
--------------
linux4palm/linux/trunk/arch/arm/configs/palmz72_defconfig
linux4palm/linux/trunk/arch/arm/mach-pxa/palmz72/palmz72.c
Modified: linux4palm/linux/trunk/arch/arm/configs/palmz72_defconfig
===================================================================
--- linux4palm/linux/trunk/arch/arm/configs/palmz72_defconfig 2007-09-12 08:23:07 UTC (rev 1305)
+++ linux4palm/linux/trunk/arch/arm/configs/palmz72_defconfig 2007-09-12 10:10:03 UTC (rev 1306)
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-hnd2
-# Tue Jul 17 01:10:55 2007
+# Linux kernel version: 2.6.21-hnd3
+# Wed Sep 12 11:26:32 2007
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -165,31 +165,32 @@
# CONFIG_MACH_MAGICIAN is not set
# CONFIG_MACH_HTCAPACHE is not set
# CONFIG_MACH_BLUEANGEL is not set
-# CONFIG_MACH_HTCBEETLES is not set
-# CONFIG_MACH_HW6900 is not set
+# CONFIG_HTC_HW6X00 is not set
# CONFIG_MACH_HTCATHENA is not set
# CONFIG_ARCH_AXIMX3 is not set
# CONFIG_ARCH_AXIMX5 is not set
# CONFIG_MACH_X50 is not set
# CONFIG_ARCH_ROVERP1 is not set
# CONFIG_ARCH_ROVERP5P is not set
-# CONFIG_MACH_XSCALE_PALMLD is not set
-# CONFIG_MACH_XSCALE_PALMTREO650 is not set
-# CONFIG_MACH_XSCALE_TREO680 is not set
-# CONFIG_MACH_T700WX is not set
# CONFIG_MACH_TUNGE2 is not set
+# CONFIG_MACH_OMAP_PALMTC is not set
# CONFIG_MACH_T3XSCALE is not set
# CONFIG_MACH_XSCALE_PALMTT5 is not set
# CONFIG_MACH_XSCALE_PALMTX is not set
+# CONFIG_MACH_XSCALE_PALMLD is not set
+# CONFIG_MACH_ZIRE31 is not set
+CONFIG_GPIOED=m
+CONFIG_GPIOEDNG=m
CONFIG_MACH_PALMZ72=y
CONFIG_PALMZ72_PM=y
CONFIG_PALMZ72_BATTERY=m
-# CONFIG_MACH_OMAP_PALMTC is not set
-# CONFIG_MACH_ZIRE31 is not set
-CONFIG_GPIOED=m
-CONFIG_GPIOEDNG=m
+CONFIG_PALMZ72_BORDER=m
+# CONFIG_MACH_XSCALE_PALMTREO650 is not set
+# CONFIG_MACH_XSCALE_TREO680 is not set
+# CONFIG_MACH_T700WX is not set
# CONFIG_MACH_GHI270HG is not set
# CONFIG_MACH_GHI270 is not set
+# CONFIG_MACH_LOOXC550 is not set
# CONFIG_PXA_SHARPSL is not set
# CONFIG_MACH_TRIZEPS4 is not set
CONFIG_PXA27x=y
@@ -839,11 +840,22 @@
# CONFIG_ADC is not set
#
+# Compaq/iPAQ Drivers
+#
+
+#
+# Compaq/HP iPAQ Drivers
+#
+# CONFIG_IPAQ_SLEEVE is not set
+# CONFIG_SLEEVE_DEBUG is not set
+
+#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_ASIC2 is not set
# CONFIG_HTC_ASIC3 is not set
+# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_ASIC3_DS1WM is not set
# CONFIG_SOC_SAMCOP is not set
@@ -872,6 +884,7 @@
CONFIG_LEDS_TRIGGER_TIMER=y
# CONFIG_LEDS_TRIGGER_HWTIMER is not set
CONFIG_LEDS_TRIGGER_MMC_CARD=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_SHARED is not set
@@ -914,7 +927,6 @@
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CORGI=y
-# CONFIG_BACKLIGHT_PXAPWM is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
@@ -1063,7 +1075,7 @@
CONFIG_USB_G_SERIAL=m
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_CHAR is not set
-# CONFIG_USB_PXA2XX_GPIO is not set
+CONFIG_USB_PXA2XX_GPIO=y
#
# MMC/SD Card support
Modified: linux4palm/linux/trunk/arch/arm/mach-pxa/palmz72/palmz72.c
===================================================================
--- linux4palm/linux/trunk/arch/arm/mach-pxa/palmz72/palmz72.c 2007-09-12 08:23:07 UTC (rev 1305)
+++ linux4palm/linux/trunk/arch/arm/mach-pxa/palmz72/palmz72.c 2007-09-12 10:10:03 UTC (rev 1306)
@@ -41,6 +41,7 @@
#include <asm/arch/palmz72-gpio.h>
#include <asm/arch/palmz72-init.h>
#include <asm/arch/pxa_camera.h>
+#include <asm/arch/pxa2xx_udc_gpio.h>
#include <sound/driver.h>
#include <sound/core.h>
@@ -103,39 +104,34 @@
* USB *
*******/
-static int palmz72_udc_is_connected(void)
+static int palmz72_udc_power( int power )
{
- int ret = !(GET_GPIO(GPIO_NR_PALMZ72_USB_DETECT));
- if (ret)
- printk (KERN_INFO "palmz72_udc: device detected [USB_DETECT: %d]\n",ret);
- else
- printk (KERN_INFO "palmz72_udc: no device detected [USB_DETECT: %d]\n",ret);
-
- return ret;
+ if (power) {
+ SET_GPIO(GPIO_NR_PALMZ72_USB_POWER, 1);
+ SET_GPIO(GPIO_NR_PALMZ72_USB_PULLUP, 1);
+ } else {
+ SET_GPIO(GPIO_NR_PALMZ72_USB_PULLUP, 0);
+ SET_GPIO(GPIO_NR_PALMZ72_USB_POWER, 0);
+ }
+
+ return power;
}
-static void palmz72_udc_command (int cmd)
-{
- switch (cmd) {
- case PXA2XX_UDC_CMD_DISCONNECT:
- SET_GPIO(GPIO_NR_PALMZ72_USB_PULLUP, 0);
- SET_GPIO(GPIO_NR_PALMZ72_USB_POWER, 0);
- printk(KERN_INFO "palmz72_udc: got command PXA2XX_UDC_CMD_DISCONNECT\n");
- break;
- case PXA2XX_UDC_CMD_CONNECT:
- SET_GPIO(GPIO_NR_PALMZ72_USB_POWER, 1);
- SET_GPIO(GPIO_NR_PALMZ72_USB_PULLUP, 1);
- printk(KERN_INFO "palmz72_udc: got command PXA2XX_UDC_CMD_CONNECT\n");
- break;
- default:
- printk("palmz72_udc: unknown command '%d'\n", cmd);
- }
-}
-static struct pxa2xx_udc_mach_info palmz72_udc_mach_info __initdata = {
- .udc_is_connected = palmz72_udc_is_connected,
- .udc_command = palmz72_udc_command,
+struct pxa2xx_udc_gpio_info palmz72_udc_info = {
+ .detect_gpio = {&pxagpio_device.dev, GPIO_NR_PALMZ72_USB_DETECT},
+ .detect_gpio_negative = 1,
+ .power_ctrl = {
+ .power = &palmz72_udc_power,
+ },
};
+static struct platform_device palmz72_udc = {
+ .name = "pxa2xx-udc-gpio",
+ .dev = {
+ .platform_data = &palmz72_udc_info
+ }
+};
+
/**********
* Keypad *
**********/
@@ -453,6 +449,7 @@
&ov9640,
#endif
&palmz72_border,
+ &palmz72_udc,
};
/***********************************************************************
@@ -518,7 +515,6 @@
set_pxa_fb_info( &palmz72_lcd_screen );
pxa_set_btuart_info(&bcm2035_pxa_bt_funcs);
pxa_set_mci_info( &palmz72_mci_platform_data );
- pxa_set_udc_info( &palmz72_udc_mach_info );
pxa_set_ficp_info( &palmz72_ficp_platform_data );
platform_add_devices( devices, ARRAY_SIZE(devices) );
}
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
×
Want the latest updates on software, tech news, and AI?
Get latest updates about software, tech news, and AI from SourceForge directly in your inbox once a month.
Thanks for helping keep SourceForge clean.
X