From: Dominic J. E. <sa...@th...> - 2005-03-10 20:39:23
|
On Thu, 10 Mar 2005, Craig Hughes wrote: > > # aumix -q > > aumix: SOUND_MIXER_READ_DEVMASK > > I've seen that before on some 'stix, and I don't know why. But > reflashing has fixed it in the past. I think that the ucb1400 ac97 > driver I wrote doesn't report properly what mixer features it supports > or something. I'll fix that. Which leads to the next interesting question - how do you reflash if you don't have the tweener/waysmall/something else with a RS232 level serial port? (See questio below :) > Try reflashing. The default volume should be 66 OSS units, which > equates to about "6" on a 10-peg volume knob (or 6.6 if your volume > goes all the way to 11). Booting then immediately trying to madplay > should work fine for headphones or external speakers set to a "normal" > volume level. If there's another way to reflash the gumstix (e.g. through usb) - let me know.. > > Also - can I just wire up a serial cable to either the X4 pad on the > > audiostix (the 2-3 pads in question), or onto the appropriate holes on > > the > > breakout-th, and hook the cable up to a pc - or does it need any extra > > stuff inbetween? (I noticed some of the schematics have extra chips, > > but I > > didn't look that closely) > > X4 I believe provides logic-level signals, not RS232 level. So you'll > have to put them through a level shifter to work as a serial port. You > can copy the level-shifter part of the waysmall schematic to do that. Hum, that should be easy enough. - d. -- Dominic J. Eidson "Baruk Khazad! Khazad ai-menu!" - Gimli ------------------------------------------------------------------------------- http://www.the-infinite.org/ |