Re: [Gumstix-users] Finalizing an embedded app

[David F. <dav...@ya...>]

Maybe make the console the other port in u-boot?
The default baudrate might be 9600 in this case?
David.

--- Darren Gibbs <ts...@ya...> wrote:
> So I finally have my gumstix application
> working pretty much as I want, 
> and I thought I experiment with how to launch
> it automagically upon 
> powerup.  I created an S60myapp script in
> /etc/init.d so I can modprobe 
> pxa-ac97 and configure the audio input and
> whatnot before launching the 
> app.  Unfortunately I copied the wrong version
> of my app over to the 
> filesystem and it is grabbing /dev/ttyS0
> instead of ttyS3.  So 
> immediately after boot, I get loads of serial
> data over the port and I 
> can't login or stop the process with Ctrl-c. 
> Networking is not being 
> brought up so I can't ssh into it.  Am I hosed?
>  Is there some way to 
> get at the filesystem... u-boot seems to have
> only 'ls'?  Will I have 
> to reflash the gumstix?  Is there a more clever
> way to do this for 
> embedded linux?
> 
> thanks for any advice,
> 
> darren
> 
> 
> 
>
-------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT
> Products from real users.
> Discover which products truly live up to the
> hype. Start reading now.
>
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> gumstix-users mailing list
> gum...@li...
>
https://lists.sourceforge.net/lists/listinfo/gumstix-users
>