Re: [Gumstix-users] Gumstix Repo Manifests for the Yocto Project Build System

[General m. l. f. g. users. <gum...@li...>]

My apologies Richard, I was trying to do too many things at once.

Have you tried the "dev" branch of that repo?  It uses the a  much new
kernel version (4.5 vs 3.18) and uses yocto Krogoth instead of Fido.  Either
should work but if you're starting from scratch, why not use the newer
kernel unless you have to stick with the older one.

When you're all done building, you should find in your
build/tmp/deploy/images/overo/ directory several files.  You'll need MLO,
u-boot.img and console-image.tar.bz2 (or whatever image you bitbaked).  From
there you'll need to copy the MLO and u-boot.img to the first partition on
your SD card and the *.tar.bz2 to the second partition on your SD card.

Your SD card creation instructions look out of date.  What instructions are
you following?  Try following the instructions  here
<https://www.gumstix.com/support/getting-started/>  .  You shouldn't need to
copy over the "uImage" ... newer builds have switched to "zImage".

Let me know how it goes.

Thanks,

Andrew




--
View this message in context: http://gumstix.8.x6.nabble.com/Gumstix-Repo-Manifests-for-the-Yocto-Project-Build-System-tp4971297p4971308.html
Sent from the Gumstix mailing list archive at Nabble.com.