From: Ash C. <ash...@gm...> - 2013-12-29 21:47:38
|
Hi Chris, I can confirm that there is no additional circuitry on the ADC lines---they go directly from the PMIC to the board-to-board header. Note though that ADCIN[3456] are multiplexed signals which will be tied low when the SEL_MADC_MCPC bit in the CARKIT_ANA_CTRL register is cleared to 0. --Ash On Sun, Dec 29, 2013 at 4:01 PM, Chris Whittenburg <whi...@gm...> wrote: > > Can someone with access to the Overo schematic verify there isn't any > additional circuitry on the ADC input lines going to the PMIC? It seems > like I'm seeing an unexpected loading on ADCIN3 thru 6, and it isn't there > on ADCIN2 or ADCIN7. It's almost like a 2K pull-down? > > Thanks. > > > ------------------------------------------------------------------------------ > Rapidly troubleshoot problems before they affect your business. Most IT > organizations don't have a clear picture of how application performance > affects their revenue. With AppDynamics, you get 100% visibility into your > Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics > Pro! > http://pubads.g.doubleclick.net/gampad/clk?id=84349831&iu=/4140/ostg.clktrk > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > |