Menu
▾
▴
Re: [Gumstix-users] kernel panic booting core-image-sato-overo on fire/chestnut
|
From: Chris P. <ch...@sk...> - 2013-10-15 17:49:33
|
On 10/15/2013 1:30 PM, Ash Charles wrote:
> Can you try this command sequence in u-boot (assuming mmc boot with
> lcd43 attached)?
> <interrupt boot>
> # setenv defaultdisplay lcd43
> # setenv dvimode 480x272MR-24@60
> # setenv mmcargs 'setenv bootargs console=${console} ${optargs}
> mpurate=${mpurate} vram=${vram} omapfb.mode=lcd43:${dvimode}
> omapdss.def_disp=${defaultdisplay} root=${mmcroot}
> rootfstype=${mmcrootfstype}'
> # boot
> <linux booting now...>
>
> IIRC, there is an issue with how the display subssystem on linux 3.5
> gets the settings for the framebuffer.
> --Ash
>
>
That worked! I do have a lcd43 attached and I got all the way to a
login prompt. (now the problem is why doesn't the desktop stay running
- but that's a new thread)
Latest log included below for completeness.
Thanks Ash, much appreciated :-)
-Chris
------------------------------------------------------------------------------
U-Boot SPL 2012.10-g6299a25 (Oct 13 2013 - 11:10:43)
OMAP SD/MMC: 0
reading u-boot.img
reading u-boot.img
U-Boot 2012.10-g6299a25 (Oct 13 2013 - 11:10:43)
OMAP3530-GP ES3.1.2, CPU-OPP2, L3-165MHz, Max CPU Clock 720 mHz
Gumstix Overo board + LPDDR/NAND
I2C: ready
DRAM: 512 MiB
NAND: 512 MiB
MMC: OMAP SD/MMC: 0
In: serial
Out: serial
Err: serial
Board revision: 1
Tranceiver detected on mmc2
No EEPROM on expansion board
Die ID #3560000700000000015a676402009010
Net: smc911x-0
Hit any key to stop autoboot: 5
Overo # setenv defaultdisplay lcd43
Overo # setenv dvimode 480x272MR-24@60
Overo # setenv mmcargs 'setenv bootargs console=${console} ${optargs}
mpurate=${mpurate} vram=${vram} omapfb.mode=lcd43:${dvimode}
omapdss.def_disp=${defaultdisplay} root=${mmcroot}
rootfstype=${mmcrootfstype}'
Overo # printenv
baudrate=115200
bootcmd=if mmc rescan ${mmcdev}; then if run loadbootscript; then run
bootscript; else if run loaduimage; then run mmcboot; else run nandboot;
fi; fi; else run nandboot; fi
bootdelay=5
bootscript=echo Running bootscript from mmc ...; source ${loadaddr}
console=ttyO2,115200n8
defaultdisplay=lcd43
dieid#=3560000700000000015a676402009010
dvimode=480x272MR-24@60
ethact=smc911x-0
ethaddr=00:15:c9:29:02:ac
loadaddr=0x82000000
loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr
loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage
mmcargs=setenv bootargs console=${console} ${optargs} mpurate=${mpurate}
vram=${vram} omapfb.mode=lcd43:${dvimode}
omapdss.def_disp=${defaultdisplay} root=${mmcroot}
rootfstype=${mmcrootfstype}
mmcboot=echo Booting from mmc ...; run mmcargs; bootm ${loadaddr}
mmcdev=0
mmcroot=/dev/mmcblk0p2 rw
mmcrootfstype=ext3 rootwait
mpurate=500
nandargs=setenv bootargs console=${console} ${optargs}
mpurate=${mpurate} vram=${vram} omapfb.mode=dvi:${dvimode}
omapdss.def_disp=${defaultdisplay} root=${nandroot}
rootfstype=${nandrootfstype}
nandboot=echo Booting from nand ...; run nandargs; nand read ${loadaddr}
280000 400000; bootm ${loadaddr}
nandroot=ubi0:rootfs ubi.mtd=4
nandrootfstype=ubifs
stderr=serial
stdin=serial
stdout=serial
vram=12M
Environment size: 1343/131068 bytes
Overo # boot
reading boot.scr
** Unable to read "boot.scr" from mmc 0:1 **
reading uImage
3479672 bytes read
Booting from mmc ...
## Booting kernel from Legacy Image at 82000000 ...
Image Name: Linux-3.5.0
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3479608 Bytes = 3.3 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.5.0 (chris@shuttle) (gcc version 4.7.2
(GCC) ) #1 PREEMPT Sun Oct 13 10:24:08 EDT 2013
[ 0.000000] CPU: ARMv7 Processor [411fc087] revision 7 (ARMv7),
cr=10c53c7d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing
instruction cache
[ 0.000000] Machine: Gumstix Overo
[ 0.000000] Reserving 12582912 bytes SDRAM for VRAM
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] OMAP3430/3530 ES3.1.2 (l2cache iva sgx neon isp 720mhz )
[ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 126720
[ 0.000000] Kernel command line: console=ttyO2,115200n8 mpurate=500
vram=12M omapfb.mode=lcd43:480x272MR-24@60 omapdss.def_disp=lcd43
root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 0.000000] allocated 1048576 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't
want memory cgroups
[ 0.000000] Memory: 499MB = 499MB total
[ 0.000000] Memory: 497704k/497704k available, 26584k reserved, 0K
highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06588cc (6467 kB)
[ 0.000000] .init : 0xc0659000 - 0xc0690da0 ( 224 kB)
[ 0.000000] .data : 0xc0692000 - 0xc06fb268 ( 421 kB)
[ 0.000000] .bss : 0xc06fb28c - 0xc0786020 ( 556 kB)
[ 0.000000] NR_IRQS:474
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96
interrupts
[ 0.000000] Total of 96 interrupts on 1 active controller
[ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps
every 131071999ms
[ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz
[ 0.000000] Console: colour dummy device 80x30
[ 0.000244] Calibrating delay loop... 597.64 BogoMIPS (lpj=2334720)
[ 0.039123] pid_max: default: 32768 minimum: 301
[ 0.039306] Security Framework initialized
[ 0.039459] Mount-cache hash table entries: 512
[ 0.040344] Initializing cgroup subsys debug
[ 0.040374] Initializing cgroup subsys cpuacct
[ 0.040374] Initializing cgroup subsys memory
[ 0.040435] Initializing cgroup subsys devices
[ 0.040435] Initializing cgroup subsys freezer
[ 0.040466] Initializing cgroup subsys perf_event
[ 0.040588] CPU: Testing write buffer coherency: ok
[ 0.040985] Setting up static identity map for 0x80462f58 - 0x80462fb0
[ 0.045562] devtmpfs: initialized
[ 0.050903] dummy:
[ 0.051361] NET: Registered protocol family 16
[ 0.051788] GPMC revision 5.0
[ 0.051818] gpmc: irq-20 could not claim: err -22
[ 0.053833] OMAP GPIO hardware version 2.5
[ 0.056518] omap_mux_init: Add partition: #1: core, flags: 0
[ 0.067718] Reprogramming SDRC clock to 332000000 Hz
[ 0.067749] dpll3_m2_clk rate change failed: -22
[ 0.067749] Found NAND on CS0
[ 0.067779] Registering NAND on CS0
[ 0.069183] usbhs_omap: alias fck already exists
[ 0.070007] platform iva.0: Enabled OPP corresponding to 720MHz
[ 0.076904] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.080352] omap-mcbsp.2: alias fck already exists
[ 0.080596] omap-mcbsp.3: alias fck already exists
[ 0.081695] Switched to new clocking rate (Crystal/Core/MPU):
26.0/332/500 MHz
[ 0.081939] OMAP DMA hardware revision 4.0
[ 0.093444] bio: create slab <bio-0> at 0
[ 0.094512] fixed-dummy:
[ 0.094909] vads7846: 3300 mV
[ 0.096008] SCSI subsystem initialized
[ 0.096466] usbcore: registered new interface driver usbfs
[ 0.096588] usbcore: registered new interface driver hub
[ 0.096923] usbcore: registered new device driver usb
[ 0.097534] omap_i2c omap_i2c.1: bus 1 rev1.3.12 at 2600 kHz
[ 0.100830] twl 1-0048: PIH (irq 7) chaining IRQs 320..328
[ 0.100982] twl 1-0048: power (irq 325) chaining IRQs 328..335
[ 0.101837] twl4030_gpio twl4030_gpio: gpio (irq 320) chaining IRQs
336..353
[ 0.103332] VUSB1V5: 1500 mV normal standby
[ 0.104003] VUSB1V8: 1800 mV normal standby
[ 0.104614] VUSB3V1: 3100 mV normal standby
[ 0.106811] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
[ 0.107543] vdd_mpu_iva: 600 <--> 1450 mV normal
[ 0.108123] vdd_core: 600 <--> 1450 mV normal
[ 0.108795] VMMC1: 1850 <--> 3150 mV at 3150 mV normal standby
[ 0.109527] VDAC: 1800 mV normal standby
[ 0.110260] VDVI: 1800 mV normal standby
[ 0.110839] omap_i2c omap_i2c.3: bus 3 rev1.3.12 at 400 kHz
[ 0.111907] omap-iommu omap-iommu.0: isp registered
[ 0.112182] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 0.113372] Switching to clocksource 32k_counter
[ 0.153442] usbhs_omap usbhs_omap: xclk60mhsp2_ck set parentfailed
error:-22
[ 0.154479] NET: Registered protocol family 2
[ 0.154876] IP route cache hash table entries: 4096 (order: 2, 16384
bytes)
[ 0.155670] TCP established hash table entries: 16384 (order: 5,
131072 bytes)
[ 0.156097] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.156372] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.156372] TCP: reno registered
[ 0.156402] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.156433] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.156860] NET: Registered protocol family 1
[ 0.157592] RPC: Registered named UNIX socket transport module.
[ 0.157623] RPC: Registered udp transport module.
[ 0.157653] RPC: Registered tcp transport module.
[ 0.157653] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.158660] platform iva.0: Enabled OPP corresponding to 720MHz
[ 0.161407] audit: initializing netlink socket (disabled)
[ 0.161468] type=2000 audit(0.156:1): initialized
[ 0.163360] VFS: Disk quotas dquot_6.5.2
[ 0.163482] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.164001] NFS: Registering the id_resolver key type
[ 0.164123] Key type id_resolver registered
[ 0.164764] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red
Hat, Inc.
[ 0.165740] fuse init (API version 7.19)
[ 0.166473] msgmni has been set to 972
[ 0.169128] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 0.169158] io scheduler noop registered
[ 0.169189] io scheduler deadline registered (default)
[ 0.170227] OMAP DSS rev 2.0
[ 0.174468] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a
OMAP UART0
[ 0.175109] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a
OMAP UART1
[ 0.175750] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a
OMAP UART2
[ 0.869079] console [ttyO2] enabled
[ 0.884399] brd: module loaded
[ 0.893554] loop: module loaded
[ 0.899169] twl4030_madc twl4030_madc: clk disabled, enabling
[ 0.907928] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron
NAND 512MiB 1,8V 16-bit), page size: 2048, OOB size: 64
[ 0.921051] Creating 5 MTD partitions on "omap2-nand.0":
[ 0.926818] 0x000000000000-0x000000080000 : "xloader"
[ 0.934326] 0x000000080000-0x000000240000 : "uboot"
[ 0.942687] 0x000000240000-0x000000280000 : "uboot environment"
[ 0.950683] 0x000000280000-0x000000a80000 : "linux"
[ 0.965270] 0x000000a80000-0x000020000000 : "rootfs"
[ 1.474426] smsc911x: Driver version 2008-10-21
[ 1.481658] smsc911x-mdio: probed
[ 1.485290] smsc911x smsc911x.0: eth0: attached PHY driver [Generic
PHY] (mii_bus:phy_addr=smsc911x-0:01, irq=-1)
[ 1.496429] smsc911x smsc911x.0: eth0: MAC Address: 00:15:c9:29:02:ac
[ 1.503295] smsc911x: Driver version 2008-10-21
[ 1.508850] usbcore: registered new interface driver asix
[ 1.514739] usbcore: registered new interface driver cdc_ether
[ 1.521057] usbcore: registered new interface driver cdc_ncm
[ 1.527465] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.535552] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[ 2.541900] ehci-omap ehci-omap.0: new USB bus registered, assigned
bus number 1
[ 2.549987] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
[ 2.566711] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[ 2.573028] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.580261] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.587890] usb usb1: Product: OMAP-EHCI Host Controller
[ 2.593536] usb usb1: Manufacturer: Linux 3.5.0 ehci_hcd
[ 2.599182] usb usb1: SerialNumber: ehci-omap.0
[ 2.605072] hub 1-0:1.0: USB hub found
[ 2.609100] hub 1-0:1.0: 3 ports detected
[ 2.645080] Initializing USB Mass Storage driver...
[ 2.650390] usbcore: registered new interface driver usb-storage
[ 2.656768] USB Mass Storage support registered.
[ 2.661682] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[ 2.675079] musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000
using DMA, IRQ 92
[ 2.686462] mousedev: PS/2 mouse device common for all mice
[ 2.693176] twl_rtc twl_rtc: Power up reset detected.
[ 2.698730] twl_rtc twl_rtc: Enabling TWL-RTC
[ 2.705932] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
[ 2.713653] i2c /dev entries driver
[ 2.719482] cpuidle: using governor ladder
[ 2.723907] cpuidle: using governor menu
[ 2.728668] omap_hsmmc omap_hsmmc.0: Failed to get debounce clk
[ 3.106109] omap_hsmmc omap_hsmmc.1: Failed to get debounce clk
[ 3.156890] usbcore: registered new interface driver usbhid
[ 3.162811] usbhid: USB HID core driver
[ 3.167633] usbcore: registered new interface driver snd-usb-audio
[ 3.176727] overo SoC init
[ 3.179809] soc-audio soc-audio: ASoC machine overo should use
snd_soc_register_card()
[ 3.267211] twl4030-codec twl4030-codec: ASoC: Failed to create
Capture debugfs file
[ 3.281158] mmc0: host does not support reading read-only switch.
assuming write-enable.
[ 3.290527] asoc: twl4030-hifi <-> omap-mcbsp.2 mapping ok
[ 3.299163] mmc0: new high speed SDHC card at address b368
[ 3.308959] oprofile: hardware counters not available
[ 3.314300] oprofile: using timer interrupt.
[ 3.319549] mmcblk0: mmc0:b368 7.45 GiB
[ 3.326385] mmcblk0: p1 p2 p3
[ 3.329986] TCP: cubic registered
[ 3.334899] NET: Registered protocol family 17
[ 3.339721] NET: Registered protocol family 15
[ 3.348358] Key type dns_resolver registered
[ 3.353149] VFP support v0.3: implementor 41 architecture 3 part 30
variant c rev 1
[ 3.369171] ThumbEE CPU extension supported.
[ 3.373809] sr_init: No PMIC hook to init smartreflex
[ 3.379425] smartreflex smartreflex.0: omap_sr_probe: SmartReflex
driver initialized
[ 3.388061] smartreflex smartreflex.1: omap_sr_probe: SmartReflex
driver initialized
[ 3.406494] mmc1: new SDIO card at address 0001
[ 3.414428] clock: disabling unused clocks to save power
[ 3.421874] registered taskstats version 1
[ 3.427673] fbcvt: Aspect ratio not CVT standard
[ 3.432586] fbcvt: 480x272@60: CVT Name - Not a CVT standard - 0.130
Mega Pixel Image
[ 3.432586]
[ 3.451751] Console: switching to colour frame buffer device 60x34
[ 3.466827] VDAC: incomplete constraints, leaving on
[ 3.473968] twl_rtc twl_rtc: setting system clock to 2000-01-01
00:02:27 UTC (946684947)
[ 3.482727] ALSA device list:
[ 3.485870] #0: overo
[ 3.496093] kjournald starting. Commit interval 5 seconds
[ 3.504608] EXT3-fs (mmcblk0p2): using internal journal
[ 3.510131] EXT3-fs (mmcblk0p2): mounted filesystem with writeback
data mode
[ 3.517730] VFS: Mounted root (ext3 filesystem) on device 179:2.
[ 3.526947] devtmpfs: mounted
[ 3.530822] Freeing init memory: 220K
[ 3.815338] systemd[1]: systemd 195 running in system mode. (-PAM
-LIBWRAP -AUDIT -SELINUX +IMA +SYSVINIT -LIBCRYPTSETUP +GCRYPT +ACL +XZ;
debian)
Welcome to [1mLinux[0m!
[ 3.931762] NET: Registered protocol family 10
[ 3.938385] systemd[1]: Inserted module 'ipv6'
[ 3.945526] systemd[1]: Set hostname to <overo>.
[ 4.293121] systemd[1]: [/etc/init.d/sysfs.sh:3] Failed to add LSB
Provides name mountvirtfs.service, ignoring: File exists
[ 4.365203] systemd[1]: Cannot add dependency job for unit
run-postinsts.service, ignoring: Unit run-postinsts.service failed to
load: No such file or directory. See system logs and 'systemctl status
run-postinsts.service' for details.
[ 4.387725] systemd[1]: Cannot add dependency job for unit
xinput-calibrator.service, ignoring: Unit display-manager.service failed
to load: No such file or directory. See system logs and 'systemctl
status display-manager.service' for details.
[ 4.410797] systemd[1]: Cannot add dependency job for unit
display-manager.service, ignoring: Unit display-manager.service failed
to load: No such file or directory. See system logs and 'systemctl
status display-manager.service' for details.
[ 4.434112] systemd[1]: Found ordering cycle on basic.target/start
[ 4.440673] systemd[1]: Walked on cycle path to sockets.target/start
[ 4.447448] systemd[1]: Walked on cycle path to dbus.socket/start
[ 4.453918] systemd[1]: Walked on cycle path to sysinit.target/start
[ 4.460784] systemd[1]: Walked on cycle path to alsa-state.service/start
[ 4.467926] systemd[1]: Walked on cycle path to bootlogd.service/start
[ 4.474884] systemd[1]: Walked on cycle path to basic.target/start
[ 4.481536] systemd[1]: Breaking ordering cycle by deleting job
dbus.socket/start
[ 4.489562] systemd[1]: Found ordering cycle on basic.target/start
[ 4.496124] systemd[1]: Walked on cycle path to sockets.target/start
[ 4.502899] systemd[1]: Walked on cycle path to avahi-daemon.socket/start
[ 4.510101] systemd[1]: Walked on cycle path to sysinit.target/start
[ 4.516876] systemd[1]: Walked on cycle path to alsa-state.service/start
[ 4.523986] systemd[1]: Walked on cycle path to bootlogd.service/start
[ 4.530944] systemd[1]: Walked on cycle path to basic.target/start
[ 4.537506] systemd[1]: Breaking ordering cycle by deleting job
avahi-daemon.socket/start
[ 4.546234] systemd[1]: Found ordering cycle on basic.target/start
[ 4.552825] systemd[1]: Walked on cycle path to sockets.target/start
[ 4.559600] systemd[1]: Walked on cycle path to dropbear.socket/start
[ 4.566406] systemd[1]: Walked on cycle path to sysinit.target/start
[ 4.573150] systemd[1]: Walked on cycle path to alsa-state.service/start
[ 4.580291] systemd[1]: Walked on cycle path to bootlogd.service/start
[ 4.587219] systemd[1]: Walked on cycle path to basic.target/start
[ 4.593811] systemd[1]: Breaking ordering cycle by deleting job
dropbear.socket/start
[ 4.602172] systemd[1]: Found ordering cycle on basic.target/start
[ 4.608764] systemd[1]: Walked on cycle path to sysinit.target/start
[ 4.615509] systemd[1]: Walked on cycle path to alsa-state.service/start
[ 4.622711] systemd[1]: Walked on cycle path to bootlogd.service/start
[ 4.629669] systemd[1]: Walked on cycle path to basic.target/start
[ 4.636199] systemd[1]: Breaking ordering cycle by deleting job
alsa-state.service/start
[ 4.644836] systemd[1]: Found ordering cycle on basic.target/start
[ 4.651397] systemd[1]: Walked on cycle path to sysinit.target/start
[ 4.658142] systemd[1]: Walked on cycle path to bootlogd.service/start
[ 4.665100] systemd[1]: Walked on cycle path to basic.target/start
[ 4.671691] systemd[1]: Breaking ordering cycle by deleting job
bootlogd.service/start
[ 4.682312] systemd[1]: Starting Forward Password Requests to Wall
Directory Watch.
[ 4.691375] systemd[1]: Started Forward Password Requests to Wall
Directory Watch.
[ 4.699645] systemd[1]: Expecting device dev-ttyO2.device...
Expecting device dev-ttyO2.device...
[ 4.723693] systemd[1]: Starting Syslog Socket.
[[1;32m OK [0m] Listening on Syslog Socket.
[ 4.746917] systemd[1]: Listening on Syslog Socket.
[ 4.752227] systemd[1]: Starting Remote File Systems.
[[1;32m OK [0m] Reached target Remote File Systems.
[ 4.778259] systemd[1]: Reached target Remote File Systems.
[ 4.784271] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[[1;32m OK [0m] Listening on /dev/initctl Compatibility Named Pipe.
[ 4.809570] systemd[1]: Listening on /dev/initctl Compatibility Named
Pipe.
[ 4.817199] systemd[1]: Starting Delayed Shutdown Socket.
[[1;32m OK [0m] Listening on Delayed Shutdown Socket.
[ 4.840759] systemd[1]: Listening on Delayed Shutdown Socket.
[ 4.847656] systemd[1]: Starting udev Kernel Socket.
[[1;32m OK [0m] Listening on udev Kernel Socket.
[ 4.872039] systemd[1]: Listening on udev Kernel Socket.
[ 4.878326] systemd[1]: Starting udev Control Socket.
[[1;32m OK [0m] Listening on udev Control Socket.
[ 4.903289] systemd[1]: Listening on udev Control Socket.
[ 4.909210] systemd[1]: Starting Dispatch Password Requests to
Console Directory Watch.
[ 4.918273] systemd[1]: Started Dispatch Password Requests to Console
Directory Watch.
[ 4.927032] systemd[1]: Starting Arbitrary Executable File Formats
File System Automount Point.
[[1;32m OK [0m] Set up automount Arbitrary Executable File Formats
F...utomount Point.
[ 4.957977] systemd[1]: Set up automount Arbitrary Executable File
Formats File System Automount Point.
[ 4.968109] systemd[1]: Starting Swap.
[[1;32m OK [0m] Reached target Swap.
[ 4.989196] systemd[1]: Reached target Swap.
[ 4.993896] systemd[1]: Starting Journal Socket.
[[1;32m OK [0m] Listening on Journal Socket.
[ 5.005279] systemd[1]: Listening on Journal Socket.
[ 5.010711] systemd[1]: Starting LSB: The RPC portmapper...
Starting LSB: The RPC portmapper...
[ 5.040374] systemd[1]: Starting LSB: Set system clock...
Starting LSB: Set system clock...
[ 5.064086] systemd[1]: Starting psplash.service...
Starting psplash.service...
[ 5.103149] systemd[1]: Starting alignment.service...
Starting alignment.service...
[ 5.141784] systemd[1]: Starting banner.service...
Starting banner.service...
[ 5.180297] systemd[1]: Starting LSB: Mount /dev/pts file systems....
Starting LSB: Mount /dev/pts file systems....
[ 5.219390] systemd[1]: Starting LSB: Mount kernel virtual file
systems....
Starting LSB: Mount kernel virtual file systems....
[ 5.258483] systemd[1]: Starting LSB: Check to root file system....
Starting LSB: Check to root file system....
[ 5.297637] systemd[1]: Starting LSB: Set hostname based on
/etc/hostname...
Starting LSB: Set hostname based on /etc/hostname...
[ 5.336578] systemd[1]: Starting LSB: Mount all filesystems....
Starting LSB: Mount all filesystems....
[ 5.375732] systemd[1]: Starting Syslog.
[[1;32m OK [0m] Reached target Syslog.
[ 5.403015] systemd[1]: Reached target Syslog.
[ 5.407958] systemd[1]: Starting Sockets.
[[1;32m OK [0m] Reached target Sockets.
[ 5.434326] systemd[1]: Reached target Sockets.
[ 5.444244] systemd[1]: Started File System Check on Root Device.
[ 5.463928] systemd[1]: Starting Remount Root and Kernel File Systems...
Starting Remount Root and Kernel File Systems...
[ 5.501220] systemd[1]: Mounted Huge Pages File System.
[ 5.527343] systemd[1]: Started Set Up Additional Binary Formats.
[ 5.540222] systemd[1]: Mounting Debug File System...
Mounting Debug File System...
[ 5.580841] systemd[1]: Mounted POSIX Message Queue File System.
[ 5.603179] systemd[1]: Starting Journal Service...
Starting Journal Service...
[[1;32m OK [0m] Started Journal Service.
[ 5.648406] systemd[1]: Started Journal Service.
[ 5.669799] systemd[1]: Started Load Kernel Modules.
[ 5.675354] systemd[1]: Mounted Configuration File System.
[ 5.706390] systemd[1]: Starting Apply Kernel Variables...
Starting Apply Kernel Variables...
[ 5.760528] systemd[1]: Starting udev Coldplug all Devices...
Starting udev Coldplug all Devices...
[ 5.815338] systemd[1]: Starting udev Kernel Device Manager...
Starting udev Kernel Device Manager...
[ 5.882141] systemd[1]: Mounting FUSE Control File System...
Mounting FUSE Control File System...
[[1;32m OK [0m] Started LSB: The RPC portmapper.
[ 5.965972] systemd[1]: Started LSB: The RPC portmapper.
[[1;32m OK [0m] Started LSB: Set system clock.
[ 6.004608] systemd[1]: Started LSB: Set system clock.
[[1;32m OK [0m] Started psplash.service.
[ 6.035858] systemd[1]: Started psplash.service.
[[1;32m OK [0m] Started alignment.service.
[ 6.067077] systemd[1]: Started alignment.service.
[[1;32m OK [0m] Started banner.service.
[ 6.088775] systemd-udevd[95]: starting version 195
[ 6.098327] systemd[1]: Started banner.service.
[[1;32m OK [0m] Started udev Kernel Device Manager.
[ 6.113983] systemd[1]: Started udev Kernel Device Manager.
[[1;32m OK [0m] Started LSB: Mount /dev/pts file systems..
[ 6.153381] systemd[1]: Started LSB: Mount /dev/pts file systems..
[ 6.168029] systemd[1]: sysfs.service: control process exited,
code=exited status=32
[[1;31mFAILED[0m] Failed to start LSB: Mount kernel virtual file systems..
See 'systemctl status sysfs.service' for details.
[ 6.238952] systemd[1]: Failed to start LSB: Mount kernel virtual
file systems..
[ 6.254364] systemd[1]: Unit sysfs.service entered failed state
[[1;32m OK [0m] Started LSB: Set hostname based on /etc/hostname.
[ 6.293640] systemd[1]: Started LSB: Set hostname based on /etc/hostname.
[[1;32m OK [0m] Started LSB: Mount all filesystems..
[ 6.324768] systemd[1]: Started LSB: Mount all filesystems..
[[1;32m OK [0m] Mounted Debug File System.
[ 6.340423] systemd[1]: Mounted Debug File System.
[[1;32m OK [0m] Started Apply Kernel Variables.
[ 6.371612] systemd[1]: Started Apply Kernel Variables.
[[1;32m OK [0m] Mounted FUSE Control File System.
[ 6.410736] systemd[1]: Mounted FUSE Control File System.
[ 6.416870] systemd[1]: Starting RPC Port Mapper.
[[1;32m OK [0m] Reached target RPC Port Mapper.
[ 6.450195] systemd[1]: Reached target RPC Port Mapper.
[ 6.467010] systemd[1]: Mounted /var/volatile.
[ 6.471923] systemd[1]: Mounted /media/ram.
[ 6.491973] systemd[1]: Walked on cycle path to sysinit.target/start
[ 6.512237] systemd[1]: Breaking ordering cycle by deleting job
bootlogd.service/start
Starting LSB: Mount kernel virtual file systems....
[[1;32m OK [0m] Started udev Coldplug all Devices.
[[1;31mFAILED[0m] Failed to start LSB: Mount kernel virtual file systems..
See 'systemctl status sysfs.service' for details.
[[1;32m OK [0m] Started Remount Root and Kernel File Systems.
[[1;32m OK [0m] Reached target Local File Systems (Pre).
Mounting Temporary Directory...
Starting Load Random Seed...
[[1;32m OK [0m] Mounted Temporary Directory.
[[1;32m OK [0m] Reached target Local File Systems.
Starting LSB: Raise network interfaces....
Starting mountnfs.service...
Starting LSB: Misc and other....
Starting LSB: Populate the volatile filesystem...
Starting Recreate Volatile Files and Directories...
Starting Trigger Flushing of Journal to Persistent Storage...
[[1;32m OK [0m] Started LSB: Check to root file system..
[[1;32m OK [0m] Started Load Random Seed.
Starting LSB: Process /etc/modules....
[[1;32m OK [0m] Started Trigger Flushing of Journal to Persistent
Storage.
[[1;32m OK [0m] Started LSB: Process /etc/modules..
[[1;32m OK [0m] Started Recreate Volatile Files and Directories.
[[1;32m OK [0m] Started mountnfs.service.
[ 11.064422] systemd-journald[87]: Received SIGUSR1
[[1;32m OK [0m] Started LSB: Misc and other..
[ 11.914398] smsc911x smsc911x.0: eth0: SMSC911x/921x identified at
0xe0816000, IRQ: 272
[[1;32m OK [0m] Started LSB: Populate the volatile filesystem.
[ 12.554382] Linux media interface: v0.10
[ 12.678527] ads7846 spi1.0: touchscreen, irq 210
[ 12.707397] Linux video capture interface: v2.00
[ 12.739837] input: ADS7846 Touchscreen as
/devices/platform/omap2_mcspi.1/spi_master/spi1/spi1.0/input/input0
[ 12.838562] omap3isp omap3isp: Revision 2.0 found
[ 12.932830] cfg80211: Calling CRDA to update world regulatory domain
[ 12.956359] omap-iommu omap-iommu.0: isp: version 1.1
[ 13.061004] lib80211: common routines for IEEE802.11 drivers
[ 13.217956] mt9v032 3-005c: Probing MT9V032 at address 0x5c
[ 13.312957] mt9v032 3-005c: MT9V032 power up failed
[ 13.357971] libertas_sdio: Libertas SDIO driver
[ 13.362762] libertas_sdio: Copyright Pierre Ossman
[ 13.390106] isp_register_subdev_group: Unable to register subdev mt9v032
[[1;32m OK [0m] Found device /dev/ttyO2.
[[1;32m OK [0m] Reached target Sound Card.
[ 15.053924] libertas_sdio: failed to find firmware (-2)
[ 16.481414] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[[1;32m OK [0m] Started LSB: Raise network interfaces..
[[1;32m OK [0m] Reached target System Initialization.
Starting Restore Sound Card State...
[[1;32m OK [0m] Reached target Basic System.
Starting LSB: Advanced Power Management daemon...
Starting Xserver startup with a display manager...
[[1;32m OK [0m] Started Xserver startup with a display manager.
Starting LSB: Remove /etc/nologin at boot...
Starting System Logging Service...
[[1;32m OK [0m] Started System Logging Service.
Starting Kernel Logging Service...
[[1;32m OK [0m] Started Kernel Logging Service.
Starting Permit User Sessions...
[[1;32m OK [0m] Listening on D-Bus System Message Bus Socket.
Starting D-Bus System Message Bus...
[[1;32m OK [0m] Started D-Bus System Message Bus.
[[1;32m OK [0m] Started Permit User Sessions.
[[1;32m OK [0m] Started LSB: Remove /etc/nologin at boot.
Starting Getty on tty1...
[[1;32m OK [0m] Started Getty on tty1.
Starting Serial Getty on ttyO2...
[[1;32m OK [0m] Started Serial Getty on ttyO2.
[[1;32m OK [[1;32m OK [0m] Started Restore Sound Card State.
[[1;32m OK [0m] Started LSB: Advanced Power Management daemon.
Starting stop-bootlogd.service...
[[1;32m OK [0m] Started stop-bootlogd.service.
[[1;32m OK [0m] Reached target Multi-User.
Starting Update UTMP about System Runlevel Changes...
[[1;32m OK [0m] Reached target Graphical Interface.
[ 19.546203] omapdss OVERLAY error: check_overlay: paddr cannot be 0
[ 19.558990] omapdss OVERLAY error: check_overlay: paddr cannot be 0
[ 19.565643] omapfb omapfb: setup_plane failed
Poky 8.0.1 (Yocto Project 1.3.1 Reference Distro) 1.3.1 overo ttyO2
overo login:
|