Re: [Gumstix-users] Using the DSP with yocto build system

[ivanfarray <iva...@gm...>]

Thanks! i did what you say and i just bitbake again, and finally got it.

But the problem now it's that after this step:

setenv mem 'mem=96M@0x80000000 mem=384M@0x88000000'
setenv mpurate 800
setenv mmcargs 'setenv bootargs console=${console} mpurate=${mpurate}
vram=${vram} omapfb.mode=dvi:${dvimode} omapfb.debug=y omapfb.vram=${fbvram}
omapdss.def_disp=${defaultdisplay} ${mem} root=${mmcroot}
rootfstype=${mmcrootfstype}'
saveenv
reset

i boot again and the booting does not advance :

U-Boot SPL 2012.07-00003-g20eaff6 (Nov 11 2012 - 05:50:46)
OMAP SD/MMC: 0
reading u-boot.img
reading u-boot.img

U-Boot 2012.07-00003-g20eaff6 (Nov 11 2012 - 05:50:46)

OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 720 mHz
Gumstix Overo board + LPDDR/NAND
I2C:   ready
DRAM:  256 MiB
NAND:  256 MiB
MMC:   OMAP SD/MMC: 0
In:    serial
Out:   serial
Err:   serial
Board revision: 0
Tranceiver detected on mmc2
No EEPROM on expansion board
Die ID #7d740004000000000403730512010010
Net:   smc911x-0
Hit any key to stop autoboot:  0 
reading boot.scr

** Unable to read "boot.scr" from mmc 0:1 **
reading uImage

3462112 bytes read
Booting from mmc ...
## Booting kernel from Legacy Image at 82000000 ...
   Image Name:   Linux-3.5.0
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3462048 Bytes = 3.3 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.


I know that's quite difficult to know the problem with just that
information.  but if someone had the same problem and knew how to resolve,
let me know.

I'm trying to get work a caspa on overo fire.

Sorry for my english,

thanks.



--
View this message in context: http://gumstix.8.n6.nabble.com/Using-the-DSP-with-yocto-build-system-tp4965998p4966023.html
Sent from the Gumstix mailing list archive at Nabble.com.