Re: [Gumstix-users] Wierd error during ./configure

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 454-5900

Hi,

I'm still having this error with stable image and this is happenning each time that I pull the power cable before properly halt or shutdown -h now… after multiple try the error is worst a kernel panic…. I did have time to investigate, only to have workaround by properly calling halt and then pulling the power cable.

Waiting for root device /dev/mmcblk0p2...
mmc0: host does not support reading read-only switch. assuming write-enable.
mmc0: new high speed SDHC card at address b368
mmcblk0: mmc0:b368 H0302 30.9 GiB 
mmcblk0: detected capacity change from 0 to 33201061888
 mmcblk0: p1 p2
EXT3-fs: barriers not enabled
mmc1: new SDIO card at address 0001
mmcblk0: error -110 transferring data, sector 60897733, nr 24, card status 0xc00
end_request: I/O error, dev mmcblk0, sector 60897734
Buffer I/O error on device mmcblk0p2, logical block 7602176
lost page write due to I/O error on mmcblk0p2
end_request: I/O error, dev mmcblk0, sector 60897741
Buffer I/O error on device mmcblk0p2, logical block 7602177
lost page write due to I/O error on mmcblk0p2
end_request: I/O error, dev mmcblk0, sector 60897749
Buffer I/O error on device mmcblk0p2, logical block 7602178
lost page write due to I/O error on mmcblk0p2
JBD: recovery failed
EXT3-fs (mmcblk0p2): error loading journal
List of all partitions:
1f00             512 mtdblock0  (driver?)
1f01            1792 mtdblock1  (driver?)
1f02             256 mtdblock2  (driver?)
1f03            4096 mtdblock3  (driver?)
1f04          517632 mtdblock4  (driver?)
b300        32422912 mmcblk0  driver: mmcblk
  b301           40131 mmcblk0p1 00000000-0000-0000-0000-000000000mmcblk0p1
  b302        32379007 mmcblk0p2 00000000-0000-0000-0000-000000000mmcblk0p2
No filesystem could mount root, tried:  ext3
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,2)

thx

KA

On 2012-02-23, at 7:50 PM, William Pretty Security Inc wrote:

> Hi All;
> 
> This is a new one on me :(
> 
> Could I have a bad/flakey uSD card ??
> 
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 
> 
> root@omap3-multi:~/work/reaver/src# ./configure
> checking for gcc... gcc
> checking whether the C compiler works... yes
> checking for C compiler default output file name... a.out
> checking for suffix of executables... 
> checking whether we are cross compiling... no
> checking for suffix of object files... o
> checking whether we are using the GNU C compiler... yes
> checking whether gcc accepts -g... yes
> checking for gcc option to accept ISO C89... none needed
> checking for pcap_open_live in -lpcap... yes
> checking for sqlite3_open in -lsqlite3... yes
> checking how to run the C preprocessor... gcc -E
> checking for grep that handles long lines and -e... /bin/grep
> checking for egrep... /bin/grep -E
> checking for ANSI C header files... mmcblk0: retrying using single block
> read
> mmcblk0: error -110 transferring data, sector 6753790, nr 42, card status
> 0x200900
> end_request: I/O error, dev mmcblk0, sector 6753790
> mmcblk0: error -110 transferring data, sector 6753791, nr 41, card status
> 0x200900
> end_request: I/O error, dev mmcblk0, sector 6753791
> mmcblk0: error -110 transferring data, sector 6753792, nr 40, card status
> 0x200900
> end_request: I/O error, dev mmcblk0, sector 6753792
> mmcblk0: error -110 transferring data, sector 6753793, nr 39, card status
> 0x200900
> end_request: I/O error, dev mmcblk0, sector 6753793
> mmcblk0: error -110 transferring data, sector 6753794, nr 38, card status
> 0x200900
> end_request: I/O error, dev mmcblk0, sector 6753794
> mmcblk0: error -110 transferring data, sector 6753795, nr 37, card status
> 0x200900
> end_request: I/O error, dev mmcblk0, sector 6753795
> mmcblk0: error -110 transferring data, sector 6753796, nr 36, card status
> 0x200900
> end_request: I/O error, dev mmcblk0, sector 6753796
> mmcblk0: error -110 transferring data, sector 6753797, nr 35, card status
> 0x200900
> end_request: I/O error, dev mmcblk0, sector 6753797
> mmcblk0: error -110 transferring data, sector 6753798, nr 34, card status
> 0x200900
> end_request: I/O error, dev mmcblk0, sector 6753798
> mmcblk0: error -110 transferring data, sector 6753799, nr 33, card status
> 0x200900
> end_request: I/O error, dev mmcblk0, sector 6753799
> mmcblk0: error -110 transferring data, sector 6753800, nr 32, card status
> 0x200900
> end_request: I/O error, dev mmcblk0, sector 6753800
> mmcblk0: error -110 transferring data, sector 6753801, nr 31, card status
> 0x200900
> end_request: I/O error, dev mmcblk0, sector 6753801
> mmcblk0: error -110 transferring data, sector 6753802, nr 30, card status
> 0x200900
> end_request: I/O error, dev mmcblk0, sector 6753802
> mmcblk0: error -110 transferring data, sector 6753803, nr 29, card status
> 0x200900
> end_request: I/O error, dev mmcblk0, sector 6753803
> mmcblk0: error -110 transferring data, sector 6753804, nr 28, card status
> 0x200900
> end_request: I/O error, dev mmcblk0, sector 6753804
> mmcblk0: error -110 transferring data, sector 6753805, nr 27, card status
> 0x200900
> end_request: I/O error, dev mmcblk0, sector 6753805
> mmcblk0: error -110 transferring data, sector 6753806, nr 26, card status
> 0x200900
> end_request: I/O error, dev mmcblk0, sector 6753806
> mmcblk0: error -110 transferring data, sector 6753807, nr 25, card status
> 0x200900
> end_request: I/O error, dev mmcblk0, sector 6753807
> mmcblk0: retrying using single block read
> mmcblk0: retrying using single block read
> mmcblk0: retrying using single block read
> mmcblk0: retrying using single block read
> mmcblk0: error -110 transferring data, sector 6753790, nr 2, card status
> 0x200900
> end_request: I/O error, dev mmcblk0, sector 6753790
> mmcblk0: error -110 transferring data, sector 6753791, nr 1, card status
> 0x200900
> end_request: I/O error, dev mmcblk0, sector 6753791
> mmcblk0: retrying using single block read
> mmcblk0: error -110 transferring data, sector 6753790, nr 2, card status
> 0x200900
> end_request: I/O error, dev mmcblk0, sector 6753790
> mmcblk0: error -110 transferring data, sector 6753791, nr 1, card status
> 0x200900
> end_request: I/O error, dev mmcblk0, sector 6753791
> no
> checking for sys/types.h... yes
> checking for sys/stat.h... yes
> checking for stdlib.h... mmcblk0: retrying using single block read
> mmcblk0: error -110 transferring data, sector 6753790, nr 2, card status
> 0x200900
> end_request: I/O error, dev mmcblk0, sector 6753790
> mmcblk0: error -110 transferring data, sector 6753791, nr 1, card status
> 0x200900
> end_request: I/O error, dev mmcblk0, sector 6753791
> mmcblk0: retrying using single block read
> mmcblk0: error -110 transferring data, sector 6753790, nr 2, card status
> 0x200900
> end_request: I/O error, dev mmcblk0, sector 6753790
> mmcblk0: error -110 transferring data, sector 6753791, nr 1, card status
> 0x200900
> end_request: I/O error, dev mmcblk0, sector 6753791
> no
> checking for string.h... mmcblk0: retrying using single block read
> mmcblk0: error -110 transferring data, sector 6753790, nr 2, card status
> 0x200900
> end_request: I/O error, dev mmcblk0, sector 6753790
> mmcblk0: error -110 transferring data, sector 6753791, nr 1, card status
> 0x200900
> end_request: I/O error, dev mmcblk0, sector 6753791
> mmcblk0: retrying using single block read
> mmcblk0: error -110 transferring data, sector 6753790, nr 2, card status
> 0x200900
> end_request: I/O error, dev mmcblk0, sector 6753790
> mmcblk0: error -110 transferring data, sector 6753791, nr 1, card status
> 0x200900
> end_request: I/O error, dev mmcblk0, sector 6753791
> no
> checking for memory.h... mmcblk0: retrying using single block read
> mmcblk0: error -110 transferring data, sector 6753790, nr 2, card status
> 0x200900
> end_request: I/O error, dev mmcblk0, sector 6753790
> mmcblk0: error -110 transferring data, sector 6753791, nr 1, card status
> 0x200900
> end_request: I/O error, dev mmcblk0, sector 6753791
> mmcblk0: retrying using single block read
> mmcblk0: error -110 transferring data, sector 6753790, nr 2, card status
> 0x200900
> end_request: I/O error, dev mmcblk0, sector 6753790
> mmcblk0: error -110 transferring data, sector 6753791, nr 1, card status
> 0x200900
> end_request: I/O error, dev mmcblk0, sector 6753791
> no
> checking for strings.h... yes
> checking for inttypes.h... yes
> checking for stdint.h... yes
> checking for unistd.h... yes
> checking for stdlib.h... (cached) no
> error: missing standard header files
> 
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 
> 
> 
> 
> 
> "Amat victoria curam "
> 
> 
> 
> 
> ------------------------------------------------------------------------------
> Virtualization & Cloud Management Using Capacity Planning
> Cloud computing makes use of virtualization - but cloud computing 
> also focuses on allowing computing to be delivered as a service.
> http://www.accelacomm.com/jaw/sfnl/114/51521223/
> _______________________________________________
> gumstix-users mailing list
> gum...@li...
> https://lists.sourceforge.net/lists/listinfo/gumstix-users