From: j <vwy...@gm...> - 2012-03-20 17:35:27
|
On 03/20/2012 05:43 AM, DaWaN wrote: > http://gumstix.8.n6.nabble.com/file/n4636617/ti-linuxutils_3.22.00.02.bb > ti-linuxutils_3.22.00.02.bb > > I have been able to bitbake an image with 3.0.0 kernel and working DSP > > I used this tutorial as a starting point: > http://jumpnowtek.com/index.php?option=com_content&view=article&id=81:gumstix-dsp-gstreamer&catid=35:gumstix&Itemid=67 > > I used the overo 2011.3 branch for openembedded > Then I added the attached TI Linuxutils 3.22 recipe in the TI folder > Then change in > Overoe-oe/org.openembedded.dev/conf/distro/include/Angstrom-codec-engine-latest-revert-versions.inc > the preferred version from 2.25 to 3.22 > > Be sure to also do the following patches / hacks: > -add mt9v032 patch for bayer pattern > -- http://patchwork.linuxtv.org/patch/7454/ > -Add media-ctl and yavta applications recipies > -- > http://gumstix.8.n6.nabble.com/Caspa-Camera-on-2-6-39-Kernel-tp571619p4549944.html > -Change uboot (pinmux fix) > -- Change the preferred uboot in overo.conf to the sakoman u-boot: > PREFERRED_PROVIDER_virtual/bootloader = "u-boot-sakoman" > -Hack gstreamer or omap3isp driver to support omap3isp driver output > --Gstreamer hack: http://patches.openembedded.org/patch/8877/ > --Driver hack: http://patchwork.linuxtv.org/patch/6176/ > > After building make sure you configure the resizer output to 640x480 as the > TIVidenc1 codec only seems to accept 4:3 resolutions > > -- > View this message in context: http://gumstix.8.n6.nabble.com/Using-TI-DSP-link-with-3-0-0-kernel-tp4626788p4636617.html > Sent from the Gumstix mailing list archive at Nabble.com. > > ------------------------------------------------------------------------------ > This SF email is sponsosred by: > Try Windows Azure free for 90 days Click Here > http://p.sf.net/sfu/sfd2d-msazure > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users great job and write up I just woke up to my kernel finally building this am. I was able to get 3.2.9 built and DSP is there. Just need to run through my script to convert the package to load for my OS. Thanks for posting all this though I did notice I missed a patch you listed but do not have a caspa so should not be an issue for me. |