From: Ananthapadmanaban <gap...@e-...> - 2012-03-08 10:47:34
|
Hi Greg, Hope this link will be useful for you to create a boot-able sdcard. * http://gumstix.org/create-a-bootable-microsd-card.html *and make use of factory tested image of gumstix from * http://cumulus.gumstix.org/images/angstrom/factory* Thanks and regards, Ananth. On 03/08/2012 01:00 AM, Greg Ericksen wrote: > > Hello, > > We recently purchased a Gumstix OveroFE and a Tobi expansion board. We > also purchased an econ-systems e-CAM50_CU35x_GSTIX camera. Now I have > some questions, and please forgive my ignorance, my Linux and > electronics knowledge is limited. I am only a mechanical engineer and > not very knowledgeable about such things. (Not on this planet anyway.) > > The camera came with a microSD card that appeared to contain two > partitions, one named "boot" and another named "rootfs". >From what I > have been able to glean this is normal for a Gumstix bootable microSD > card. The two partitions contained to following stuff. > > rootfs: > > drwxrwxr-x 2 root root 4096 1999-12-31 16:13 bin > drwxrwxr-x 2 root root 4096 2011-07-23 10:47 boot > drwxr-xr-x 3 root root 4096 2011-07-21 20:18 dev > drwxr-xr-x 7 500 500 4096 2011-11-14 03:14 > e-CAM50_CU35x_GSTIX_BIN_1.356 > drwxr-xr-x 59 root root 4096 2011-07-23 15:18 etc > drwxrwxr-x 3 root root 4096 2011-07-23 10:45 home > drwxrwxr-x 5 root root 4096 1999-12-31 16:09 lib > lrwxrwxrwx 1 root root 12 2011-08-30 03:11 linuxrc -> /bin/busybox > drwxrwxr-x 12 root root 4096 1999-12-31 16:00 media > drwxrwxr-x 3 root root 4096 2011-07-23 10:47 mnt > drwxr-xr-x 2 root root 4096 2011-07-21 20:18 proc > drwxrwxr-x 2 root root 4096 1999-12-31 16:10 sbin > drwxr-xr-x 2 root root 4096 2011-07-21 20:18 sys > lrwxrwxrwx 1 root root 8 2011-08-30 03:11 tmp -> /var/tmp > drwxrwxr-x 12 root root 4096 2011-07-20 06:14 usr > drwxrwxr-x 9 root root 4096 2011-07-23 15:24 var > > boot: > -rw-r--r-- 1 fooj fooj 24288 2011-08-25 17:00 MLO > -rw-r--r-- 1 fooj fooj 5760054 2011-07-25 08:22 snap_1600x1200_0.bmp > -rw-r--r-- 1 fooj fooj 9437238 2011-07-25 08:22 snap_2048x1536_0.bmp > -rw-r--r-- 1 fooj fooj 15116598 2011-07-25 08:22 snap_2592x1944_0.bmp > -rw-r--r-- 1 fooj fooj 195984 2011-08-25 17:00 u-boot.bin > -rw-r--r-- 1 fooj fooj 2970980 2011-11-03 16:51 uImage > -rw-r--r-- 1 fooj fooj 11827200 2011-07-25 07:59 video_320x240_0.uyvy > -rw-r--r-- 1 fooj fooj 22732800 2011-07-25 08:00 video_640x480_0.uyvy > > The camera also came with a CD containing a sample application > (capture.elf) and a camera driver (v4l2_driver.ko) > > I was able to get the OveroFE/Tobi hooked up to a monitor, keyboard > and mouse and successfully booted to a desktop. I was also able to > connect to the OveroFE/Tobi through the serial USB serial port from a > Windows PC using PuTTY. > > What I have not been able to do however is get the camera to work. I > have tried: > > 1.Copying capture.elf and v4l2_driver.ko to the OveroFE and using the > command "insmod v4l2_driver.ko" to install the driver. This only gives > me an error: "v4l2_driver: disagrees about version of symbol > module_layout. insmod: error inserting 'v4l2_driver.ko': -1 Invalid > module format" > > 2.Creating a bootable microSD card per the instructions at gumstix.org > using a pre-built factor image. However, there seems to be a > disconnect between those instructions and the instructions for how to > write an image to flash (which seems to need a .ubi file instead of a > full directory structure) > > 3.Contacting econ-systems to get their help. I received this from them: > "Please make use of factory images available in > http://cumulus.gumstix.org/images/angstrom/factory and try to boot the > gumstix board. Then replace uImage with e-con uImage, then load the > camera driver to complete the similar Binary setup (sdcard) provided > by e-con." > I don't see how I can do this if I can't create a bootable microSD > card in the first place. > > I am hoping that someone has done this before and might be able to > guide me through getting this up and running. > > Thank you VERY much in advance for your help. > > Greg > > Greg Ericksen > Senior Mechanical Engineer > ger...@re... <mailto:ger...@re...> > > 7642 Standish Place, Rockville, MD 20855 > > Office: 301.279.7970 > Fax: 301.279.7973 > Mobile: 202.531.5606 > > www.redXdefense.com <http://www.redXdefense.com> > > > ------------------------------------------------------------------------------ > Virtualization& Cloud Management Using Capacity Planning > Cloud computing makes use of virtualization - but cloud computing > also focuses on allowing computing to be delivered as a service. > http://www.accelacomm.com/jaw/sfnl/114/51521223/ > > > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users |