From: Tim R. <gu...@ec...> - 2012-03-03 09:42:56
|
On Fri, 2012-03-02 at 15:10 -0600, Chris Whittenburg wrote: I think you needed to update the MLO on the sdcard, not the one in nand. > Hi - thanks - I feel this isn't the case, because the boot procedure stalls before u-boot even starts. As I understand it, u-boot is supposed to load from nand and then launch bootcmd.scr which searches for a kernel on the sd card. However, when I have a bootable sd card inserted u-boot doesn't even display its initial message. I just get a short garbled message similar to: �tذb�$U @ @ @D��` @ However its worth a try so I made a card with the newest linaro (12.02). I don't know what version of MLO this is but it must be pretty new. It didn't help. I understand its not possible to just copy a new version of MLO over it because MLO has to be on the very first sector of the card. I don't know how to find out what version the MLO binaries I have are. the 'file' command just reports them as 'data' I can still manually load linux from the card by typing the commands from bootcmd.scr Tim -- View this message in context: http://gumstix.8.n6.nabble.com/Overo-Airstorm-mmc-boot-problem-tp4539832p4542549.html Sent from the Gumstix mailing list archive at Nabble.com. |