Re: [Gumstix-users] WiFi never loaded on ironStrom!!!!!!

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 454-5900

I bought two IronStorms around 2.5 weeks ago and use the built-in image
2.6.39 that came with the boards. I don't use a uSD card as I only run the
console and don't have a need for the graphics user interface. Hope all
works out for you… Cheers

From:  "Petar Durdevic [via Gumstix]" <ml-...@n6...>
Date:  Wed, 4 Jan 2012 08:25:16 -0800 (PST)
To:  Nader Rahimizad <na...@ra...>
Subject:  Re: WiFi never loaded on ironStrom!!!!!!

Thanks for your help, just a quick question, which image are you using (url
if possible)?? and which board??

Greetings 

Petar Durdeivc

On Wed, Jan 4, 2012 at 4:49 PM, Nader Rahimizad [via Gumstix] <[hidden
email] </user/SendEmail.jtp?type=node&node=3159575&i=0> > wrote:
> Hi Petar, your setup is a bit different than my new board! The settings that I
> gave you worked like a charm on mine. Sorry that I can't help on this
> 
> From:  "Petar Durdevic [via Gumstix]" <[hidden email]
> <http://user/SendEmail.jtp?type=node&node=3158308&i=0> >
> Date:  Tue, 3 Jan 2012 21:11:19 -0800 (PST)
> To:  Nader Rahimizad <[hidden email]
> <http://user/SendEmail.jtp?type=node&node=3158308&i=1> >
> Subject:  Re: WiFi never loaded on ironStrom!!!!!!
> 
> Hi and thanks for such a fast reply, i have done the things which you wrote,
> but it tells me under boot,
> Failed to bring up wlan0,
> I have pasted the boot sequence.
> 
> 
> X-Loader 1.5.0 (Sep 16 2011 - 12:10:02)
> OMAP36XX/37XX-GP ES2.1
> Board revision: 1
> Reading boot sector
> Loading u-boot.bin from mmc
> 
> 
> U-Boot 2010.12 (Aug 22 2011 - 09:49:35)
> 
> OMAP36XX/37XX-GP ES2.1, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz
> Gumstix Overo board + LPDDR/NAND
> I2C:   ready 
> DRAM:  512 MiB 
> NAND:  512 MiB 
> MMC:   OMAP SD/MMC: 0
> *** Warning - bad CRC, using default environment
> 
> In:    serial 
> Out:   serial 
> Err:   serial 
> Board revision: 1
> Tranceiver detected on mmc2
> No EEPROM on expansion board
> Die ID #187800029ff80000016830c40a027016
> Net:   No ethernet found.
> Hit any key to stop autoboot:  0
> reading boot.scr 
> 
> ** Unable to read "boot.scr" from mmc 0:1 **
> reading uImage 
> 
> 2914772 bytes read
> Booting from mmc ...
> ## Booting kernel from Legacy Image at 82000000 ...
>    Image Name:   Angstrom/2.6.39/overo
>    Image Type:   ARM Linux Kernel Image (uncompressed)
>    Data Size:    2914708 Bytes = 2.8 MiB
>    Load Address: 80008000
>    Entry Point:  80008000
>    Verifying Checksum ... OK
>    Loading Kernel Image ... OK
> OK 
> 
> Starting kernel ...
> 
> Uncompressing Linux... done, booting the kernel.
> Linux version 2.6.39 (neil@cumulus) (gcc version 4.3.3 (GCC) ) #1 Mon Aug 15
> 19:04:09 PDT 2011
> CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
> CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
> Machine: Gumstix Overo
> Reserving 12582912 bytes SDRAM for VRAM
> Memory policy: ECC disabled, Data cache writeback
> OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
> SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x10000
> Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz
> Reprogramming SDRC clock to 332000000 Hz
> Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 126976
> Kernel command line: console=ttyO2,115200n8 mpurate=720 vram=12M
> omapfb.mode=dvi:1024x768MR-16@60 omapdss.def_disp=dvi root=/dev/mmcblk0p2 rw
> rootfstype=ext3 rootwait
> PID hash table entries: 2048 (order: 1, 8192 bytes)
> Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
> Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
> Memory: 500MB = 500MB total
> Memory: 501204k/501204k available, 23084k reserved, 0K highmem
> Virtual kernel memory layout:
>     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
>     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
>     DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
>     vmalloc : 0xe0800000 - 0xf8000000   ( 376 MB)
>     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
>     modules : 0xbf000000 - 0xc0000000   (  16 MB)
>       .init : 0xc0008000 - 0xc0039000   ( 196 kB)
>       .text : 0xc0039000 - 0xc0574944   (5359 kB)
>       .data : 0xc0576000 - 0xc05b75c0   ( 262 kB)
> NR_IRQS:410 
> IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
> Total of 96 interrupts on 1 active controller
> OMAP clockevent source: GPTIMER1 at 32768 Hz
> sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
> Console: colour dummy device 80x30
> Calibrating delay loop... 597.64 BogoMIPS (lpj=2334720)
> pid_max: default: 32768 minimum: 301
> Mount-cache hash table entries: 512
> CPU: Testing write buffer coherency: ok
> devtmpfs: initialized
> omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_core
> omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per
> omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup
> omap_hwmod: gpt12_fck: missing clockdomain for gpt12_fck.
> omap_hwmod: i2c1: softreset failed (waited 10000 usec)
> omap_hwmod: i2c2: softreset failed (waited 10000 usec)
> omap_hwmod: i2c3: softreset failed (waited 10000 usec)
> print_constraints: dummy:
> NET: Registered protocol family 16
> GPMC revision 5.0
> OMAP GPIO hardware version 2.5
> OMAP GPIO hardware version 2.5
> OMAP GPIO hardware version 2.5
> OMAP GPIO hardware version 2.5
> OMAP GPIO hardware version 2.5
> OMAP GPIO hardware version 2.5
> omap_mux_init: Add partition: #1: core, flags: 0
> Found NAND on CS0
> Registering NAND on CS0
> hw-breakpoint: debug architecture 0x4 unsupported.
> Switched to new clocking rate (Crystal/Core/MPU): 26.0/332/720 MHz
> OMAP DMA hardware revision 5.0
> bio: create slab <bio-0> at 0
> print_constraints: vads7846: 3300 mV
> SCSI subsystem initialized
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> omap_i2c omap_i2c.1: bus 1 rev4.0 at 2600 kHz
> twl4030: PIH (irq 7) chaining IRQs 368..375
> twl4030: power (irq 373) chaining IRQs 376..383
> twl4030: gpio (irq 368) chaining IRQs 384..401
> print_constraints: VUSB1V5: 1500 mV normal standby
> print_constraints: VUSB1V8: 1800 mV normal standby
> print_constraints: VUSB3V1: 3100 mV normal standby
> twl4030_usb twl4030_usb: Initialized TWL4030 USB module
> print_constraints: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
> print_constraints: VDAC: 1800 mV normal standby
> print_constraints: VDVI: 1800 mV normal standby
> omap_i2c omap_i2c.3: bus 3 rev4.0 at 400 kHz
> Advanced Linux Sound Architecture Driver Version 1.0.24.
> Bluetooth: Core ver 2.16
> NET: Registered protocol family 31
> Bluetooth: HCI device and connection manager initialized
> Bluetooth: HCI socket layer initialized
> Bluetooth: L2CAP socket layer initialized
> Bluetooth: SCO socket layer initialized
> Switching to clocksource 32k_counter
> Switched to NOHz mode on CPU #0
> musb-hdrc: version 6.0, musb-dma, host, debug=0
> musb-hdrc musb-hdrc: MUSB HDRC host driver
> musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 1
> usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb1: Product: MUSB HDRC host driver
> usb usb1: Manufacturer: Linux 2.6.39 musb-hcd
> usb usb1: SerialNumber: musb-hdrc
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 1 port detected
> musb-hdrc musb-hdrc: USB Host mode controller at fa0ab000 using DMA, IRQ 92
> NET: Registered protocol family 2
> IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
> TCP established hash table entries: 16384 (order: 5, 131072 bytes)
> TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
> TCP: Hash tables configured (established 16384 bind 16384)
> TCP reno registered
> UDP hash table entries: 256 (order: 0, 4096 bytes)
> UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
> NET: Registered protocol family 1
> RPC: Registered udp transport module.
> RPC: Registered tcp transport module.
> RPC: Registered tcp NFSv4.1 backchannel transport module.
> VFS: Disk quotas dquot_6.5.2
> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> Registering unionfs 2.5.9 (for 2.6.39-rc5)
> JFFS2 version 2.2. (NAND) (SUMMARY)  �© 2001-2006 Red Hat, Inc.
> msgmni has been set to 978
> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
> io scheduler noop registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> OMAP DSS rev 2.0 
> Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
> omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
> omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
> console [ttyO2] enabled
> omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3
> brd: module loaded
> loop: module loaded
> omap2-nand driver initializing
> ONFI flash detected
> NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron NAND 512MiB 1,8V
> 16-bit) 
> cmdlinepart partition parsing not available
> Creating 5 MTD partitions on "omap2-nand.0":
> 0x000000000000-0x000000080000 : "xloader"
> 0x000000080000-0x000000240000 : "uboot"
> 0x000000240000-0x000000280000 : "uboot environment"
> 0x000000280000-0x000000680000 : "linux"
> 0x000000680000-0x000020000000 : "rootfs"
> smsc911x: Driver version 2008-10-21.
> smsc911x: Driver version 2008-10-21.
> usbcore: registered new interface driver asix
> usbcore: registered new interface driver cdc_ether
> cdc_ncm: 23-Apr-2011
> usbcore: registered new interface driver cdc_ncm
> ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
> ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 2
> ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
> ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
> usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
> usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb2: Product: OMAP-EHCI Host Controller
> usb usb2: Manufacturer: Linux 2.6.39 ehci_hcd
> usb usb2: SerialNumber: ehci-omap.0
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 3 ports detected
> Initializing USB Mass Storage driver...
> usbcore: registered new interface driver usb-storage
> USB Mass Storage support registered.
> udc: OMAP UDC driver, version: 4 October 2004 (iso) (dma)
> mousedev: PS/2 mouse device common for all mice
> twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
> i2c /dev entries driver
> OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
> Bluetooth: HCI UART driver ver 2.2
> Bluetooth: HCI H4 protocol initialized
> Bluetooth: HCI BCSP protocol initialized
> Bluetooth: HCILL protocol initialized
> cpuidle: using governor ladder
> cpuidle: using governor menu
> usbcore: registered new interface driver usbhid
> usbhid: USB HID core driver
> usbcore: registered new interface driver snd-usb-audio
> overo SoC init 
> asoc: twl4030-hifi <-> omap-mcbsp-dai.1 mapping ok
> ALSA device list:
>   #0: overo 
> oprofile: hardware counters not available
> oprofile: using timer interrupt.
> TCP cubic registered
> NET: Registered protocol family 17
> NET: Registered protocol family 15
> Bluetooth: RFCOMM TTY layer initialized
> Bluetooth: RFCOMM socket layer initialized
> Bluetooth: RFCOMM ver 1.11
> Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> Bluetooth: BNEP filters: protocol multicast
> Bluetooth: HIDP (Human Interface Emulation) ver 1.2
> Registering the dns_resolver key type
> VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
> ThumbEE CPU extension supported.
> Power Management for TI OMAP3.
> sr_init: No PMIC hook to init smartreflex
> smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
> smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
> clock: disabling unused clocks to save power
> fbcvt: 1024x768@60: CVT Name - .786M3-R
> Console: switching to colour frame buffer device 128x48
> regulator_init_complete: VDAC: incomplete constraints, leaving on
> regulator_init_complete: vads7846: incomplete constraints, leaving on
> twl_rtc twl_rtc: setting system clock to 2011-08-29 16:08:01 UTC (1314634081)
> Waiting for root device /dev/mmcblk0p2...
> mmc0: host does not support reading read-only switch. assuming write-enable.
> mmc0: new high speed SDHC card at address 0001
> mmcblk0: mmc0:0001 00000 3.67 GiB
> mmcblk0: detected capacity change from 0 to 3941597184
>  mmcblk0: p1 p2 p3
> EXT3-fs: barriers not enabled
> kjournald starting.  Commit interval 5 seconds
> EXT3-fs (mmcblk0p2): using internal journal
> EXT3-fs (mmcblk0p2): recovery complete
> EXT3-fs (mmcblk0p2): mounted filesystem with writeback data mode
> VFS: Mounted root (ext3 filesystem) on device 179:2.
> devtmpfs: mounted
> Freeing init memory: 196K
> INIT: version 2.86 booting
> Please wait: booting...
> Starting udev 
> udev: starting version 151
> udevd (95): /proc/95/oom_adj is deprecated, please use /proc/95/oom_score_adj
> instead. 
> ads7846 spi1.0: touchscreen, irq 274
> ads7846 spi1.0: no device detected, test read result was 0x00000FFF
> usbcore: registered new interface driver usbserial
> USB Serial support registered for generic
> usbcore: registered new interface driver usbserial_generic
> usbserial: USB Serial Driver core
> USB Serial support registered for GSM modem (1-port)
> usbcore: registered new interface driver option
> option: v0.7.2:USB Driver for GSM modems
> Remounting root file system...
> 
> udevadm settle - timeout of 8 seconds reached, the event queue contains:
>   
> /sys/devices/platform/omap/omap_hsmmc.0/mmc_host/mmc0/mmc0:0001/block/mmcblk0
> (640) 
>   
> /sys/devices/platform/omap/omap_hsmmc.0/mmc_host/mmc0/mmc0:0001/block/mmcblk0/
> mmcblk0p1 (641) 
>   
> /sys/devices/platform/omap/omap_hsmmc.0/mmc_host/mmc0/mmc0:0001/block/mmcblk0/
> mmcblk0p2 (642) 
>   
> /sys/devices/platform/omap/omap_hsmmc.0/mmc_host/mmc0/mmc0:0001/block/mmcblk0/
> mmcblk0p3 (643) 
> Caching udev devnodes
> Populating dev cache
> NET: Registered protocol family 10
> FAT: bogus number of reserved sectors
> VFS: Can't find a valid FAT filesystem on dev mmcblk0p3.
> EXT3-fs (mmcblk0p3): error: can't find ext3 filesystem on dev mmcblk0p3.
> EXT2-fs (mmcblk0p3): error: can't find an ext2 filesystem on dev mmcblk0p3.
> FAT: bogus number of reserved sectors
> VFS: Can't find a valid FAT filesystem on dev mmcblk0p3.
> ALSA: Restoring mixer settings...
> Cleaning: /etc/network/run/ifstate.
> Configuring network interfaces... Could not read interface wlan0 flags: No
> such device 
> Failed to initialize driver interface
> Failed to bring up wlan0.
> done. 
> Starting portmap daemon: portmap.
> net.ipv4.conf.default.rp_filter = 1
> net.ipv4.conf.all.rp_filter = 1
> INIT: Entering runlevel: 5
> Starting system message bus: dbus.
> Starting Hardware abstraction layer hald
> Starting OpenBSD Secure Shell server: sshd
> done. 
> Starting advanced power management daemon: No APM support in kernel
> (failed.) 
> Starting ntpd: done
> Starting syslog-ng:.
> [ ok ]rting Avahi mDNS/DNS-SD Daemon: avahi-daemon
> Starting Bluetooth subsystem:
> CSR build ID 0x00-0x37
> Device setup complete
>  ttyO1 bluetoothd hid2hci rfcomm.
> Waiting for connection on channel 1
> No SGX hardware, not starting PVR
> Starting GPE display manager: gpe-dm
> 
> .---O---.        
> |       |                  .-.           o o
> |   |   |-----.-----.-----.| |   .----..-----.-----.
> |       |     | __  |  ---'| '--.|  .-'|     |     |
> |   |   |  |  |     |---  ||  --'|  |  |  '  | | | |
> '---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
>                 -'  |
>                 '---'
> 
> The Angstrom Distribution overo ttyO2
> 
> Angstrom 2011.03 overo ttyO2
> 
> overo login: 
> 
> 
> Greetings 
> 
> Petar Durdevic 
> 
> 
> If you reply to this email, your message will be added to the discussion
> below:
> http://gumstix.8.n6.nabble.com/WiFi-never-loaded-on-ironStrom-tp3005168p307742
> 0.html 
> To unsubscribe from WiFi never loaded on ironStrom!!!!!!, click here.
> NAML 
> <http://gumstix.8.n6.nabble.com/template/NamlServlet.jtp?macro=macro_viewer&id
> =instant_html%21nabble%3Aemail.naml&base=nabble.naml.namespaces.BasicNamespace
> -nabble.view.web.template.NabbleNamespace-nabble.view.web.template.InstantMail
> Namespace&breadcrumbs=instant+emails%21nabble%3Aemail.naml-instant_emails%21na
> bble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml>
> 
> 
> 
> If you reply to this email, your message will be added to the discussion
> below:
> http://gumstix.8.n6.nabble.com/WiFi-never-loaded-on-ironStrom-tp3005168p315830
> 8.html 
> To unsubscribe from WiFi never loaded on ironStrom!!!!!!, click here.
> NAML 
> <http://gumstix.8.n6.nabble.com/template/NamlServlet.jtp?macro=macro_viewer&id
> =instant_html%21nabble%3Aemail.naml&base=nabble.naml.namespaces.BasicNamespace
> -nabble.view.web.template.NabbleNamespace-nabble.view.web.template.InstantMail
> Namespace&breadcrumbs=instant+emails%21nabble%3Aemail.naml-instant_emails%21na
> bble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml>

-- 
Best Regards

Petar Durdevic

If you reply to this email, your message will be added to the discussion
below:
http://gumstix.8.n6.nabble.com/WiFi-never-loaded-on-ironStrom-tp3005168p3159
575.html 
To unsubscribe from WiFi never loaded on ironStrom!!!!!!, click here
<http://gumstix.8.n6.nabble.com/template/NamlServlet.jtp?macro=unsubscribe_b
y_code&node=3005168&code=bmFkZXJAcmFoaW1pemFkLmNvbXwzMDA1MTY4fDM0NDE3ODQ1OA=
=> .
NAML 
<http://gumstix.8.n6.nabble.com/template/NamlServlet.jtp?macro=macro_viewer&
id=instant_html%21nabble%3Aemail.naml&base=nabble.naml.namespaces.BasicNames
pace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.Insta
ntMailNamespace&breadcrumbs=instant+emails%21nabble%3Aemail.naml-instant_ema
ils%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml>

--
View this message in context: http://gumstix.8.n6.nabble.com/WiFi-never-loaded-on-ironStrom-tp3005168p3159905.html
Sent from the Gumstix mailing list archive at Nabble.com.