From: Nader R. <na...@ra...> - 2012-01-01 07:04:58
|
Hi guys, I have followed a number of threads where people try to build a new kernel with Steve's omap-3.0-pm repository including: http://gumstix.8.n6.nabble.com/Building-3-0-for-dummies-and-I-still-can-t-get-it-working-td571153.html#a571160 to start with, i followed the instructions here on an Ubuntu 10.04 and have built the ~/overo-oe directory including bit bake, open embedded and the works http://gumstix.org/software-development/open-embedded/61-using-the-open-embedded-build-system.html I am confused as to how to go from the current setup having followed the instruction from the above link to building a new kernel using Steve's latest masterpiece omap-3.0-pm which includes the working Kaspa drivers. the closest instructions that i have found which does NOT use bit bake is: git clone git://www.sakoman.com/git/linux-omap-2.6 cd linux-omap-2.6 git checkout omap-3.0-pm zcat /proc/config.gz > .config make oldconfig make uImage make modules make modules_install make install mount /dev/mmcblk0p1 /mnt cp ./arch/arm/boot/uImage /mnt/uImage sync umount /mnt reboot But, this is for compiling on the Overo! I am looking for similar instruction to go from having the overo-oe folder already setup and having already compiled omap-console-image using the Gumstix instruction to building the kernel for 3.0-pm... Would anyone be able to give me step by step instruction as to where to git checkout omap-3.0-pm into and how to modify all the various files that are in the overo-oe folder to be able to use bit bake to create a set of images identical to what Steve has uploaded to his R13 Daily GNOME build at: http://www.sakoman.com/category/8-gnome-daily-builds-r13.html I would be grateful for your help... P.S. Happy New Year -- View this message in context: http://gumstix.8.n6.nabble.com/Follow-up-no-ADC-in-on-ADCIN3-6-2-6-39-and-3-0-tp640788p2707369.html Sent from the Gumstix mailing list archive at Nabble.com. |