Menu
▾
▴
Re: [Gumstix-users] Build error with creating an OpenEmbedded Build System for the Overo Series
|
From: Bardiya S. <ba...@da...> - 2011-08-04 19:42:02
|
I ran "git clone git://www.sakoman.com/git/linux-omap-2.6.git;branch=omap-2.6.39;protocol=git" without any trouble, so I think the network is fine. Should I just copy this folder to a directory inside overo-oe? Should I rewrite linux-omap3_2.6.39.bb? ---------------------------------------- > Date: Thu, 4 Aug 2011 11:28:52 -0700 > From: ne...@gu... > To: gum...@li... > Subject: Re: [Gumstix-users] Build error with creating an OpenEmbedded Build System for the Overo Series > > That recipe matches mine. Only other thing I can suggest is removing > old sources before trying another clean build. Something like this. > > $ mkdir oldsources > $ cd oldsources > $ mv ~/overo-oe/sources/git_www.sakoman.com.git.linux-omap-2.6.git* ./ > $ bitbake -c clean linux-omap3 > $ bitbake linux-omap3 > > If that doesn't work then I think it must be a network problem. If > such is the case, you can return the old sources and revert > linux-omap3_2.6.39.bb one commit. Otherwise you can just wait for git > to come back up. > > - > Neil > > > On Thu, Aug 4, 2011 at 10:29 AM, Bardiya Shadmehr > <ba...@da...> wrote: > > > > Neil, > > > > I still get the same error. The contents of /home/dns/overo-oe/org.openembedded.dev/recipes/linux/linux-omap3_2.6.39.bb are below: > > > > > > require linux.inc > > > > DESCRIPTION = "Linux kernel for OMAP processors" > > KERNEL_IMAGETYPE = "uImage" > > > > BOOT_SPLASH ?= "logo_linux_clut224-generic.ppm" > > PV = "2.6.39" > > > > S = "${WORKDIR}/git" > > > > SRCREV = d639075e26a17b0f7f0f0493b252f0088270dae4 > > SRC_URI = "git://www.sakoman.com/git/linux-omap-2.6.git;branch=omap-2.6.39;protocol=git \ > > file://defconfig \ > > file://${BOOT_SPLASH} \ > > " > > > > do_configure_prepend() { > > > > if [ "${MUSB_MODE}" = "host" ]; then > > sed -i 's:CONFIG_USB_GADGET=y:# CONFIG_USB_GADGET is not set:g' ${WORKDIR}/defconfig > > sed -i 's:# CONFIG_USB_MUSB_HOST is not set:CONFIG_USB_MUSB_HOST=y:g' ${WORKDIR}/defconfig > > sed -i 's:CONFIG_USB_MUSB_PERIPHERAL=y:# CONFIG_USB_MUSB_PERIPHERAL is not set:g' ${WORKDIR}/defconfig > > sed -i 's:CONFIG_USB_MUSB_OTG=y:# CONFIG_USB_MUSB_OTG is not set:g' ${WORKDIR}/defconfig > > sed -i 's:# CONFIG_USB_MUSB_HDRC_HCD is not set:CONFIG_USB_MUSB_HDRC_HCD=y:g' ${WORKDIR}/defconfig > > sed -i 's:CONFIG_USB_GADGET_MUSB_HDRC=y:# CONFIG_USB_GADGET_MUSB_HDRC is not set:g' ${WORKDIR}/defconfig > > fi > > > > if [ "${MUSB_MODE}" = "peripheral" ]; then > > sed -i 's:# CONFIG_USB_GADGET is not set:CONFIG_USB_GADGET=y:g' ${WORKDIR}/defconfig > > sed -i 's:CONFIG_USB_MUSB_HOST=y:# CONFIG_USB_MUSB_HOST is not set:g' ${WORKDIR}/defconfig > > sed -i 's:# CONFIG_USB_MUSB_PERIPHERAL is not set:CONFIG_USB_MUSB_PERIPHERAL=y:g' ${WORKDIR}/defconfig > > sed -i 's:CONFIG_USB_MUSB_OTG=y:# CONFIG_USB_MUSB_OTG is not set:g' ${WORKDIR}/defconfig > > sed -i 's:CONFIG_USB_MUSB_HDRC_HCD=y:# CONFIG_USB_MUSB_HDRC_HCD is not set:g' ${WORKDIR}/defconfig > > sed -i 's:# CONFIG_USB_GADGET_MUSB_HDRC is not set:CONFIG_USB_GADGET_MUSB_HDRC=y:g' ${WORKDIR}/defconfig > > fi > > > > if [ "${MUSB_MODE}" = "otg" ]; then > > sed -i 's:# CONFIG_USB_GADGET is not set:CONFIG_USB_GADGET=y:g' ${WORKDIR}/defconfig > > sed -i 's:CONFIG_USB_MUSB_HOST=y:# CONFIG_USB_MUSB_HOST is not set:g' ${WORKDIR}/defconfig > > sed -i 's:CONFIG_USB_MUSB_PERIPHERAL=y:# CONFIG_USB_MUSB_PERIPHERAL is not set:g' ${WORKDIR}/defconfig > > sed -i 's:# CONFIG_USB_MUSB_OTG is not set:CONFIG_USB_MUSB_OTG=y:g' ${WORKDIR}/defconfig > > sed -i 's:CONFIG_USB_MUSB_HDRC_HCD=y:# CONFIG_USB_MUSB_HDRC_HCD is not set:g' ${WORKDIR}/defconfig > > sed -i 's:# CONFIG_USB_GADGET_MUSB_HDRC is not set:CONFIG_USB_GADGET_MUSB_HDRC=y:g' ${WORKDIR}/defconfig > > fi > > } > > > > > > > > > > ---------------------------------------- > >> Date: Thu, 4 Aug 2011 09:57:45 -0700 > >> From: ne...@gu... > >> To: gum...@li... > >> Subject: Re: [Gumstix-users] Build error with creating an OpenEmbedded Build System for the Overo Series > >> > >> Hi Bardiya, > >> > >> I just tried a clean build of the kernel that went fine. It's possible > >> that Steve's server was down when you tried to build. If you still > >> have a problem please post the contents of > >> /home/dns/overo-oe/org.openembedded.dev/recipes/linux/linux-omap3_2.6.39.bb > >> > >> - > >> Neil > >> > >> On Thu, Aug 4, 2011 at 9:15 AM, Bardiya Shadmehr > >> <ba...@da...> wrote: > >> > > >> > Hello, > >> > > >> > I'm trying to create a OpenEmbedded build system, and I went to http://www.gumstix.org/software-development/open-embedded/61-using-the-open-embedded-build-system.html and followed the instructions there. On the last step (bitbake omap3-console-image) I ran into the following error: > >> > > >> > NOTE: Running task 1719 of 5168 (ID: 910, /home/dns/overo-oe/org.openembedded.dev/recipes/linux/linux-omap3_2.6.39.bb, do_fetch) > >> > > >> > NOTE: package linux-omap3-2.6.39-r102: task do_fetch: Started > >> > > >> > fatal: Not a git repository (or any of the parent directories): .git > >> > > >> > NOTE: package linux-omap3-2.6.39-r102: task Fetch failed: Unable to > >> > fetch URL > >> > git://www.sakoman.com/git/linux-omap-2.6.git;branch=omap-2.6.39;protocol=git > >> > from any source.: Failed > >> > > >> > ERROR: Function 'Fetch failed: Unable to fetch URL > >> > git://www.sakoman.com/git/linux-omap-2.6.git;branch=omap-2.6.39;protocol=git > >> > from any source.' failed > >> > > >> > ERROR: Task 910 > >> > (/home/dns/overo-oe/org.openembedded.dev/recipes/linux/linux-omap3_2.6.39.bb, > >> > do_fetch) failed with exit code '1' > >> > > >> > ERROR: '/home/dns/overo-oe/org.openembedded.dev/recipes/linux/linux-omap3_2.6.39.bb' failed > >> > > >> > > >> > When I got similar errors in the past, I modified the SRC_URI in the file to a working link. However, I haven't been able to find a working link in this case. Has anyone else found a working link or an alternative solution? Thanks for your help. > >> > > >> > ------------------------------------------------------------------------------ > >> > BlackBerry® DevCon Americas, Oct. 18-20, San Francisco, CA > >> > The must-attend event for mobile developers. Connect with experts. > >> > Get tools for creating Super Apps. See the latest technologies. > >> > Sessions, hands-on labs, demos & much more. Register early & save! > >> > http://p.sf.net/sfu/rim-blackberry-1 > >> > _______________________________________________ > >> > gumstix-users mailing list > >> > gum...@li... > >> > https://lists.sourceforge.net/lists/listinfo/gumstix-users > >> > > >> > >> ------------------------------------------------------------------------------ > >> BlackBerry® DevCon Americas, Oct. 18-20, San Francisco, CA > >> The must-attend event for mobile developers. Connect with experts. > >> Get tools for creating Super Apps. See the latest technologies. > >> Sessions, hands-on labs, demos & much more. Register early & save! > >> http://p.sf.net/sfu/rim-blackberry-1 > >> _______________________________________________ > >> gumstix-users mailing list > >> gum...@li... > >> https://lists.sourceforge.net/lists/listinfo/gumstix-users > > > > ------------------------------------------------------------------------------ > > BlackBerry® DevCon Americas, Oct. 18-20, San Francisco, CA > > The must-attend event for mobile developers. Connect with experts. > > Get tools for creating Super Apps. See the latest technologies. > > Sessions, hands-on labs, demos & much more. Register early & save! > > http://p.sf.net/sfu/rim-blackberry-1 > > _______________________________________________ > > gumstix-users mailing list > > gum...@li... > > https://lists.sourceforge.net/lists/listinfo/gumstix-users > > > > ------------------------------------------------------------------------------ > BlackBerry® DevCon Americas, Oct. 18-20, San Francisco, CA > The must-attend event for mobile developers. Connect with experts. > Get tools for creating Super Apps. See the latest technologies. > Sessions, hands-on labs, demos & much more. Register early & save! > http://p.sf.net/sfu/rim-blackberry-1 > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users |