From: mpettit <mp...@ar...> - 2011-07-26 17:21:04
|
Thanks Neil, My wpa.conf is a little different i created with (name and password changed to protect the innocent ;-)) #wpa_passphrase mynetworkname mynetworkpass >wpa.conf # cat wpa.conf network={ ssid="mynetworkname" #psk="mynetworkpass" psk=6532df54317223b7d9b9dbe90ce6bd7b403a8fb8b72ced67b6eadfe43f8e30b6 } and i had to add into /etc/network/interfaces my wireless interface auto wlan1 iface wlan1 inet dhcp wireless_mode managed wireless_essid mynetworkname pre-up wpa_supplicant -B -Dwext -iwlan1 -c/home/root/wpa.conf post-down killall -q wpa_supplicant Feels good to be free =^D enmach wrote: > > Hi Mike, > > On 11-07-26 08:29 AM, mpettit wrote: >> >> Hi Neil, >> >> I am seeing the same as Anders. I noted that if i power up without the >> the >> usb cable (J8) from Windows7, i see the red light go to blinking. After >> which plug in the USB cable and establish console connection using >> TeraTerm, i see that ACM is registered and later ttyUSB0, ttyUSB1 >> attached >> followed by usb devices disconnected. see dmesg output. >> >> I am assuming that the HubCommander is taking priority over the Overo. I >> am >> a little disapointed in no ethernet jack and am struggling to set up >> wlan1 >> to get ssh connection to prove this to myself. >> > > What I normally do is plug in USB-A to mini-B to establish a console to > the Overo. Then create a file called wpa_supplicant.conf with your > wireless configuration. Mine looks something like > > network={ > ssid="mynetworkname" > scan_ssid=1 > psk="mynetworkpass" > } > > You might need something different depending on your security settings. > > # ifconfig wlan0 up > # wpa_supplicant -Dwext -iwlan0 -cwpa_supplicant.conf & > # dhclient wlan0 > > Get your wireless ip and connect from a different machine. > > # ifconfig > ... > wlan0 ... > inet addr:10.0.1.13 > ... > > neil@desktop:~$ ssh root@10.0.1.13 > > Once you have a wireless connection, unplug the USB cable and let your > robot be free. If I can come up with a reliable way to report the > wireless IP I will put together a script that automates the above > process as much as possible. Suggestions welcome. > > > - > Neil > > > > > ------------------------------------------------------------------------------ > Magic Quadrant for Content-Aware Data Loss Prevention > Research study explores the data loss prevention market. Includes in-depth > analysis on the changes within the DLP market, and the criteria used to > evaluate the strengths and weaknesses of these DLP solutions. > http://www.accelacomm.com/jaw/sfnl/114/51385063/ > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > > -- View this message in context: http://old.nabble.com/RoboVero-tp32127005p32141987.html Sent from the Gumstix mailing list archive at Nabble.com. |