From: Anders N. <and...@co...> - 2011-07-25 21:40:40
|
Hi, Thanks for the reply. Yes, the red LED flash when I connect the USB. The LED is turned on when applying power and it start to blink when connecting the USB cable. After some searching on the net it seems that the problem might be that OSX does not properly support CDC composite USB devices. If I attach an overo board to the robovero I can connect to the overo console using one of the ttys created. However I do not see the ttyACM device, should I ? dmesg reports the following cdc_acm 2-2.3:1.1: usb_probe_interface,ftdi_sio,usb_wwan cdc_acm 2-2.3:1.1: usb_probe_interface - got id cdc_acm 2-2.3:1.1: This device cannot do calls on its own. It is not a modem.9:56:50 PST 2cdc_acm 2-2.3:1.1: ttyACM0: USB ACM device cdc_acm 2-2.3:1.1: ttyACM0: USB ACM device usbcore: registered new interface driver cdc_acm cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters I'm using the prebuild image from the gumstix site in the 2011-03-25-1619 directory. /Anders On 25 jul 2011, at 18.13, Neil MacMunn wrote: > Hi Anders, > > On 11-07-24 11:22 AM, Anders Nilsson wrote: >> Hi, >> >> I'm having trouble connecting to my RoboVero board using kermit. When a connect a USB cable two tty devices >> are created, /dev/tty.usbserial-004013FAA and /dev/tty.usbserial-004013FAB (MacOSX). I've tried both but netither >> seems to work. >> >> What are the terminal parameters I should use ? >> > > Does the red LED on the board flash when you connect usb? > > > - > Neil > > ------------------------------------------------------------------------------ > Storage Efficiency Calculator > This modeling tool is based on patent-pending intellectual property that > has been used successfully in hundreds of IBM storage optimization engage- > ments, worldwide. Store less, Store more with what you own, Move data to > the right place. Try It Now! http://www.accelacomm.com/jaw/sfnl/114/51427378/ > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users |