From: William P. S. I. <bil...@xp...> - 2011-06-17 14:16:16
|
Howdy Akram ! "People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf." - George Orwell From: Akram Hameed [mailto:ak...@aq...] Sent: Thursday, June 16, 2011 11:17 PM To: General mailing list for gumstix users. Subject: Re: [Gumstix-users] Still Have ifconfig problem :( Howdy again, Bill. The IC on the TOBI, unless it has changed lately is an SMSC LAN9221. When my kernel (based on Steve's.) loads the TOBI net driver, I get a message like the following during boot: net eth0: SMSC911x/921x identified at 0xd0872000, IRQ: 336 If you don't see anything like this during boot (or in dmesg), sounds like the driver is not being loaded. This is what I see: Loading u-boot.bin from mmc U-Boot 2010.12 (Mar 06 2011 - 20:54:20) OMAP3503-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 600 mHz Gumstix Overo board + LPDDR/NAND I2C: ready DRAM: 512 MiB NAND: 512 MiB MMC: OMAP SD/MMC: 0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Board revision: 2 Direct connection on mmc2 No EEPROM on expansion board Die ID #18e400040000000004037d0710020008 Net: smc911x: Invalid chip endian 0x4765c321 No ethernet found. Hit any key to stop autoboot: 0 Could Gumstix have changed chips ??? Or is it damaged ?? This is what I get from lsmod: root@omap3-multi:~# lsmod Module Size Used by ipv6 222207 18 ads7846 8867 0 p.s. relating to something someone mentioned earlier, you need to use iwconfig to inspect/manage wireless adapters rather than ifconfig. >> That was a typo. My mistake . |