From: Kevin K. <kow...@gm...> - 2011-03-25 15:50:37
|
Hi, For some reason the GPIO keys on the Palo35 or Chestnut 43 do not work when Android is built from source. Attached is my board-overo.c file. For some reason keys does contain init code while LED's does not. The LED's do work, but pressing on either GPIO button (23 & 14) does not work. I should note that the buttons do work with the pre-built images, so if the source is available for those I would also be interested in seeing it. Thanks, Kevin |