[Gumstix-users] overoADDRCONF(NETDEV_UP): wlan0: link is not ready

[Carl S. <car...@s1...>]

Hi,

Since I'm new to the Gumstick community, please I apologized to not having
red all the zillion of previous posts, but I scrolled for subject and I
tried the search and I found nothing

My problem is basic.

After that I followed  all the installation notes (Eclipse, JRE, Package
add-on for Eclipse, FTDI driver etc ..). I finally got a working Gumstix
system and I was able to log on it after boot using the Eclipse Terminal.
Everything worked fine

Then, since I want to used a Cross-Compler on a Linux Host,I tried to
configure the Eclipse remote debugger and tried to communicate with the
Gumstix target using a Ethernet connection using to Tobi expansion board.

Since this trial, I'm not able to get even a working prompt at the Terminal
on my Gumstix target because I always get the following message at the end
of booting sequence:overoADDRCONF(NETDEV_UP): wlan0: link is not ready.

I do not want a the stage of my project use the WiFi capability of the
Gumstix board.
I just want to have a working development environment using Eclipse on a
Linux or Windows host, (I choose Linux) cross-compile the code, download the
code on the target and run a debugger from my host computer

At the end of the boot sequence, the prompt is frozen and it seem that no
ternimal inputs are processed.
I tried in both Linux and Windows (using hyperterminal) configuration since
a suspect the FTDI driver to not work correctely.
Same result, on both OS: the prompt is frozen. 

note: At the countdown at the beginning of the boot sequence, I cannot stop
it. It is really look as no terminal input is red by the Gumstix


Here the terminal output result


(previous output line removed)

Starting Network connection manager daemon: NetworkManager.
Starting PVR
PVRSRV_PIXEL_FORMAT_RGB565
Starting GPE display manager: gpe-dm

.-------.
|       |                  .-.
|   |   |-----.-----.-----.| |   .----..-----.-----.
|       |     | __  |  ---'| '--.|  .-'|     |     |
|   |   |  |  |     |---  ||  --'|  |  |  '  | | | |
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
                -'  |
                '---'

The Angstrom Distribution overo ttyS2

Angstrom 2009.X-test-20100101 overo ttyS2

overoADDRCONF(NETDEV_UP): wlan0: link is not ready
 login:

(This terminal output is frozen here)



Thanks

Carl
-- 
View this message in context: http://old.nabble.com/overoADDRCONF%28NETDEV_UP%29%3A-wlan0%3A-link-is-not-ready-tp30547021p30547021.html
Sent from the Gumstix mailing list archive at Nabble.com.