From: Victhor <vic...@gm...> - 2010-12-09 19:47:34
|
Perhaps you downloaded the "console" image instead of the "desktop" or "palmtop" images, which include a gui. "console" images are console-only. > No, it's on the angstrom prompt. > > Trevor > > -----Original Message----- > From: Victhor [mailto:vic...@gm...] > Sent: Thursday, December 09, 2010 11:33 AM > To: General mailing list for gumstix users. > Subject: Re: [Gumstix-users] Desktop not strating on Chestnut43 board > > Does the LCD remain white? > > Hi, > > > > I am having an issue with my chestnut 43 board. > > I have an LCD screen attached to it, and whatever is shipped with, > > apparently the touchscreen lcd didn't' work. Soo, tech support told me > > to make sure it has latest firmware, so I followed the instructions > > EXACTLY on the gumstix website > > > 'http://www.gumstix.net/Setup-and-Programming/view/Overo-Setup-and-Progr > > amming/Creating-a-bootable-microSD-card/111.html' for creating > bootable > > flash card, and the thing comes up at the Angstrom prompt. Fine. This > > doesn't do me any good. > > and then I wanted a desktop to load so I can verify the touchscreen > > operation (and get is RMA'd if it ends up still not working). > > I followed the gumstix > > > 'http://www.gumstix.net/Setup-and-Programming/view/Overo-Setup-and-Progr > > amming/Writing-images-to-onboard-nand/111.html' operation EXACTLY and > > the Angstrom prompt still comes up. I tried typing 'Linux' and 'Run > > Linux' and 'Desktop' and 'Run Desktop' and nothing seems to work. > > Is there a secret command I need to enter to start the desktop? > > > > Trevor > > > > -----Original Message----- > > From: Neil MacMunn [mailto:ne...@gu...] > > Sent: Thursday, December 09, 2010 11:12 AM > > To: General mailing list for gumstix users. > > Subject: Re: [Gumstix-users] compilation error > > > > Hi Trevor, > > > > Please start a new thread and provide more detail about the problem > you > > are having (i.e. what you have tried, boot output, etc.) > > > > Neil > > > > On 10-12-08 06:19 PM, Fox, Trevor wrote: > > > How DO I start the GUI Desktop from the Angstrom command prompt? > > > > > > Trevor > > > > > > -----Original Message----- > > > From: hillarion [mailto:hil...@gm...] > > > Sent: Wednesday, December 08, 2010 7:58 AM > > > To: gum...@li... > > > Subject: [Gumstix-users] compilation error > > > > > > > > > for a couple weeks now i have been trying to compile a gumstix > image. > > I > > > wanted the desktop image, after a couple fail, I have been advice to > > > start > > > with the console image first then come back to the desktop image. > > When > > > the > > > console too failed to build I found a new advice that said to build > > the > > > culprit module separately. Well, that failed too. > > > > > > Over these weeks i did a daily update, in case a fix would be > inserted > > > someplace. Something i will stop doing as soon as i have a > build-able > > > distribution. It seems the notion of having development/stable > > > releases > > > has not reach the openEmbedded community yet. > > > > > > Anyways, if anyone have more ideas on this failure, i would be happy > > to > > > hear > > > it. > > > Here is the transcript from the last build. > > > > > > bitbake omap3-console-image > > > NOTE: Handling BitBake files: / (7249/7249) [100 %] > > > NOTE: Parsing finished. 6526 cached, 416 parsed, 307 skipped, 2 > > masked. > > > > > > Build Configuration: > > > BB_VERSION = "1.8.18" > > > METADATA_BRANCH = "overo" > > > METADATA_REVISION = "4f24bd3" > > > TARGET_ARCH = "arm" > > > TARGET_OS = "linux-gnueabi" > > > MACHINE = "overo" > > > DISTRO = "angstrom" > > > DISTRO_VERSION = "2010.7-test-20101208" > > > TARGET_FPU = "hard" > > > > > > NOTE: Resolving any missing task queue dependencies > > > NOTE: Preparing runqueue > > > NOTE: Executing runqueue > > > NOTE: Running task 428 of 4903 (ID: 2451, > > > > > > virtual:native:/home/overo/overo-oe/org.openembedded.dev/recipes/glib-2. > > > 0/glib-2.0_2.24.1.bb, > > > do_patch) > > > NOTE: Applying patch 'configure-libtool.patch' > > > > > > (org.openembedded.dev/recipes/glib-2.0/glib-2.0-2.24.1/configure-libtool > > > .patch) > > > ERROR: Execution of 'quilt > > > > --quiltrc=/home/overo/overo-oe/tmp/sysroots/i686-linux/usr/bin/quiltrc > > > push' > > > failed with exit code 1: > > > Applying patch patches/configure-libtool.patch > > > patching file configure.in > > > Hunk #1 FAILED at 1174. > > > Hunk #2 FAILED at 1265. > > > Hunk #3 FAILED at 1339. > > > 3 out of 3 hunks FAILED -- rejects in file configure.in > > > Patch patches/configure-libtool.patch does not apply (enforce with > -f) > > > > > > ERROR: Error in executing: > > > > > > /home/overo/overo-oe/org.openembedded.dev/recipes/glib-2.0/glib-2.0_2.24 > > > .1.bb > > > ERROR: Exception:<type 'exceptions.SystemExit'> Message:1 > > > ERROR: Printing the environment of the function > > > ERROR: Error in executing: > > > > > > /home/overo/overo-oe/org.openembedded.dev/recipes/glib-2.0/glib-2.0_2.24 > > > .1.bb > > > ERROR: Exception:<type 'exceptions.SystemExit'> Message:1 > > > ERROR: Printing the environment of the function > > > ERROR: Error in executing: > > > > > > /home/overo/overo-oe/org.openembedded.dev/recipes/glib-2.0/glib-2.0_2.24 > > > .1.bb > > > ERROR: Exception:<type 'exceptions.SystemExit'> Message:1 > > > ERROR: Printing the environment of the function > > > ERROR: Build of > > > > > > virtual:native:/home/overo/overo-oe/org.openembedded.dev/recipes/glib-2. > > > 0/glib-2.0_2.24.1.bb > > > do_patch failed > > > ERROR: Task 2451 > > > > > > (virtual:native:/home/overo/overo-oe/org.openembedded.dev/recipes/glib-2 > > > .0/glib-2.0_2.24.1.bb, > > > do_patch) failed > > > NOTE: Tasks Summary: Attempted 427 tasks of which 427 didn't need to > > be > > > rerun and 1 failed. > > > ERROR: > > > > > > 'virtual:native:/home/overo/overo-oe/org.openembedded.dev/recipes/glib-2 > > > .0/glib-2.0_2.24.1.bb' > > > failed > > > > > > > > ------------------------------------------------------------------------ > > ------ > > _______________________________________________ > > gumstix-users mailing list > > gum...@li... > > https://lists.sourceforge.net/lists/listinfo/gumstix-users > > > > > ------------------------------------------------------------------------ > ------ > > _______________________________________________ > > gumstix-users mailing list > > gum...@li... > > https://lists.sourceforge.net/lists/listinfo/gumstix-users > > > > ------------------------------------------------------------------------ > ------ > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > > ------------------------------------------------------------------------------ > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users |