From: Ash C. <as...@gu...> - 2010-11-30 01:19:19
|
Hi Michael, On Mon, Nov 29, 2010 at 1:20 PM, Michael Hope <mic...@ju...> wrote: > This boots quite happily if I put the Overo in the slot next to the > USB console and Ethernet port. It takes about a minute to boot, but > in the end I see the two LEDs next to the USB OTG port light up and > see a DHCP request go over the network. If I then take the same Overo > and SD card and shift it to any other slot, these lights don't come on > and the DHCP request doesn't get sent. This is really puzzling as the slots of the Stagecoach are effectively identical save the console connection on the first slot and, potentially, the data in the EEPROM that (IIRC) is specific to each slot. When you move the Overo back to the first slot, does it boot again? Is the Overo seating properly on the connectors in other slots? What rev. boards are you using? > > How can I debug this? Is there any way of getting to the console when > in a different slot? Short answer: no. As Stagecoach is designed right now, only the first slot has a console port available. Sorry that I can't be more help but this is a bit bizarre. -Ash |