Re: [Gumstix-users] One way communication with Tobi board through FTDI

[jtdreisb <jtd...@gm...>]

You may have an issue with HW flow control on your terminal emulation
software on the pc side.

Try using 'screen /dev/ttyUSB0 115200'

Good Luck
Jason

Yoav Luft wrote:
> 
> Hello,
> I'm new to mailing list, just got a tobi board and overo earth, and it
> seems like the communication with the overo is one way: I can receive
> messages, but not send. My machine runs a 2.6.34 gentoo modified
> kernel, and I checked with another, older kernel. I get all the
> communication from the overo, from boot to login, but I cannot send
> anything. I tried using minicom, kermit and plain ol' 'echo "^M" >
> /dev/ttyUSB0', and without any success. I've also loaded the ftdi_sio
> module with debug flag, but found nothing useful in the logs.
> Have anyone encountered similar problem? Can you suggest any
> work-arounds so I could start working while trying to replace the
> board?
> Thanks,
> Yoav Luft.
> 
> ------------------------------------------------------------------------------
> Download new Adobe(R) Flash(R) Builder(TM) 4
> The new Adobe(R) Flex(R) 4 and Flash(R) Builder(TM) 4 (formerly 
> Flex(R) Builder(TM)) enable the development of rich applications that run
> across multiple browsers and platforms. Download your free trials today!
> http://p.sf.net/sfu/adobe-dev2dev
> _______________________________________________
> gumstix-users mailing list
> gum...@li...
> https://lists.sourceforge.net/lists/listinfo/gumstix-users
> 
> 

-- 
View this message in context: http://old.nabble.com/One-way-communication-with-Tobi-board-through-FTDI-tp29982519p29985632.html
Sent from the Gumstix mailing list archive at Nabble.com.