From: Maxim P. <lis...@gm...> - 2010-08-03 11:46:15
|
For example: drivers/video/omap2/displays/panel-samsung-lte430wq-f0c.c static struct omap_video_timings samsung_lte_timings = { .x_res = 480, .y_res = 272, .pixel_clock = 9200, .hsw = 41, .hfp = 8, .hbp = 45-41, .vsw = 10, .vfp = 4, .vbp = 12-10, }; static int samsung_lte_panel_probe(struct omap_dss_device *dssdev) { dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS | OMAP_DSS_LCD_IHS; dssdev->panel.timings = samsung_lte_timings; return 0; } Your parameters are: OMAP_DSS_LCD_IVS and OMAP_DSS_LCD_IHS regards, Max 2010/8/3 ck-...@ti... <ck-...@ti...> > I have a QVGA display ( Powertip_320x240 PH320240T-002 ) which was > working with the > verdex framebuffer driver without any problems. > > Now i connected the display to the Chestnut board and tried to get it run. > The display is not working correct, some flickring pictures. > > I know how to change the timings of the display with > sys/devices/platform/omapdss/display0/timings. > But fot the framebuffer driver on the verdex system i had to set the > following paramaters too: > > hsync:0 ( horizontal and vertical sync must be low active ) > vsync:0 > outputen:0 ( output enable polarity must be low active ) > pixclockpol:1 ( rising edge ) > > Does anybody know how i can set these values either by the sys > filesystem or by changing the 'default' panel driver? > I already checked the panel drivers and some headers but i could not > find corresponding attributes there. > > Thanks > Clemens > > > ------------------------------------------------------------------------------ > The Palm PDK Hot Apps Program offers developers who use the > Plug-In Development Kit to bring their C/C++ apps to Palm for a share > of $1 Million in cash or HP Products. Visit us here for more details: > http://p.sf.net/sfu/dev2dev-palm > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > |