From: Victhor <vic...@gm...> - 2010-07-19 22:42:35
|
I don't know what modifications are necessary, but they are around the mailing list IIRC. You only need a logic level converter to use SPI devices that don't run at 1.8V. > On Monday, July 19, 2010 06:13:07 pm Victhor wrote: > > If that sensor doesn't run at 1.8V there's a great chance that you may > > have ruined your board. Also, SPI needs some modifications to the kernel > > to work with other devices that's not the ADS7846 resistive touchscreen > > controller on the Palo35, Palo43 and Chestnut43 expansion boards, it > > seems. > > What are the modifications that need to be done? I have an ethernet switch IC > that I'd like to talk to over the SPI interface (I do have level translators > in the circuit). > > Do you have links or other information about modifying the kernel for the SPI > interface on the Overo? > > -A. > > > ------------------------------------------------------------------------------ > This SF.net email is sponsored by Sprint > What will you do first with EVO, the first 4G phone? > Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users |