From: Ash C. <as...@gu...> - 2010-04-28 17:48:03
|
Hi Momday, I did a clean build of 'verdex-console-image' and 'u-boot-verdex' and do not see errors related to u-boot-omap2430sdp_1.1.4.bb (though admittedly, this recipe fails when I try to build it directly). Could you walk me through what you are doing/trying to build that gives this errror? I tested my freshly built image and I can plug in and detect a USB hub with a keyboard attached. How are you testing functionality? Normally I would either use a VNC session or just cat /dev/input/<usb keyboard device> however /dev/input doesn't appear which seems suspicious. -Ash On Tue, Apr 27, 2010 at 12:10 PM, Momday DOK <mom...@ka...> wrote: > Hi Ash, > > For some unknown reasons, the bitbake image build started to fail because > of the recipe: u-boot-omap2430sdp_1.1.4.bb which got me suspicious since I > am building for the Verdex. > So I've just pulled the last OE and still get a build error. > After I deleted that file from recipes folder, I am able to build again. > > However, now, the usb doesn't seem to work. When I plugged a mouse or a > keyboard it seems to be detected but not functional. > Have you seen the symptom w/ your latest build? > > This is the output of boot up: > > *Uncompressing > Linux.................................................................................... > done, booting the kernel. > Linux version 2.6.31 (mdok@kaneoh) (gcc version 4.3.3 (GCC) ) #1 Tue Apr 27 > 01:03:10 UTC 2010 > CPU: XScale-PXA270 [69054117] revision 7 (ARMv5TE), cr=0000397f > CPU: VIVT data cache, VIVT instruction cache > Machine: Gumstix verdex > Memory policy: ECC disabled, Data cache writeback > Run Mode clock: 208.00MHz (*16) > Turbo Mode clock: 416.00MHz (*2.0, active) > Memory clock: 104.00MHz (/2) > System bus clock: 104.00MHz > Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 > Kernel command line: console=ttyS0,115200n8 noinitrd > init=/sbin/init.sysvinit root=/dev/mmcblk0p2 rw rootdelay=1 > PID hash table entries: 256 (order: 8, 1024 bytes) > Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) > Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) > Memory: 64MB = 64MB total > Memory: 62176KB available (2212K code, 252K data, 156K init, 0K highmem) > NR_IRQS:192 > Console: colour dummy device 80x30 > Calibrating delay loop... 415.33 BogoMIPS (lpj=2076672) > Mount-cache hash table entries: 512 > CPU: Testing write buffer coherency: ok > NET: Registered protocol family 16 > Gumstix verdex udc is disabled > Initializing Gumstix verdex i2c > Initializing Gumstix verdex smsc911x > Initializing Gumstix verdex pcmcia > Not netCF-vx board: pcmcia using newer GPIO configuration > CPLD responded with: ff > found 1 CF slots > Initializing Gumstix verdex FB info > Initializing Gumstix platform_add_devices > bio: create slab <bio-0> at 0 > NET: Registered protocol family 2 > IP route cache hash table entries: 1024 (order: 0, 4096 bytes) > TCP established hash table entries: 2048 (order: 2, 16384 bytes) > TCP bind hash table entries: 2048 (order: 1, 8192 bytes) > TCP: Hash tables configured (established 2048 bind 2048) > TCP reno registered > NET: Registered protocol family 1 > msgmni has been set to 121 > alg: No test for stdrng (krng) > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) > io scheduler noop registered > io scheduler cfq registered (default) > Console: switching to colour frame buffer device 80x24 > pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 22) is a FFUART > console [ttyS0] enabled > pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 21) is a BTUART > pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 20) is a STUART > Probing Gumstix Flash ROM at physical address 0x00000000 (16-bit bankwidth) > Gumstix Flash ROM: Found 1 x16 devices at 0x0 in 16-bit bank > Intel/Sharp Extended Query Table at 0x010A > Intel/Sharp Extended Query Table at 0x010A > Intel/Sharp Extended Query Table at 0x010A > Intel/Sharp Extended Query Table at 0x010A > Intel/Sharp Extended Query Table at 0x010A > Using buffer write method > Using auto-unlock on power-up/resume > cfi_cmdset_0001: Erase suspend on write enabled > Using static partitions on Gumstix Flash ROM > Creating 3 MTD partitions on "Gumstix Flash ROM": > 0x000000000000-0x000000040000 : "Bootloader" > 0x000000040000-0x000000f00000 : "RootFS" > 0x000000f00000-0x000001000000 : "Kernel" > pxa-rtc pxa-rtc: rtc core: registered pxa-rtc as rtc0 > TCP cubic registered > NET: Registered protocol family 17 > XScale iWMMXt coprocessor detected. > pxa-rtc pxa-rtc: setting system clock to 2010-04-06 19:28:59 UTC > (1270582139) > Waiting 1sec before mounting root device... > mmc0: host does not support reading read-only switch. assuming write-enable. > mmc0: new SD card at address 8001 > mmcblk0: mmc0:8001 SU256 241 MiB > mmcblk0: p1 p2 > kjournald starting. Commit interval 5 seconds > EXT3 FS on mmcblk0p2, internal journal > EXT3-fs: mounted filesystem with writeback data mode. > VFS: Mounted root (ext3 filesystem) on device 179:2. > Freeing init memory: 156K > INIT: version 2.86 booting > Please wait: booting... > Remounting root file system... > logger: mount: mount point /proc/bus/usb does not exist > Undefined users: >> pulse > Skipping /etc/default/volatiles/04_pulse > Undefined users: >> haldaemon > Skipping /etc/default/volatiles/99_hal > net.ipv4.conf.default.rp_filter = 1 > net.ipv4.conf.all.rp_filter = 1 > hwclock: can't open '/dev/misc/rtc': No such file or directory > Tue Apr 27 01:57:00 UTC 2010 > hwclock: can't open '/dev/misc/rtc': No such file or directory > Checking for built-in Bluetooth: /etc/rcS.d/S97blueprobe: line 158: can't > open /dev/ttyS1: no such file > yes > Configuring dbus. > Adding system startup for /etc/init.d/dbus-1. > Configuring hal. > Undefined users: >> pulse > Skipping /etc/default/volatiles/04_pulse > Configuring pcsc-lite. > Adding system startup for /etc/init.d/pcscd. > Configuring busybox-syslog. > Adding system startup for /etc/init.d/syslog. > Configuring update-modules. > Configuring i2c. > Adding system startup for /etc/init.d/i2c. > Configuring bonjour. > Adding system startup for /etc/init.d/bonjour. > Configuring ppp. > Configuring ppp-dialin. > Configuring portmap. > Adding system startup for /etc/init.d/portmap. > Configuring keymaps. > Adding system startup for /etc/init.d/keymap. > Configuring modutils-initscripts. > Adding system startup for /etc/init.d/modutils.sh. > Configuring hicolor-icon-theme. > //usr/lib/opkg/info/hicolor-icon-theme.postinst: line 7: can't create > /etc/gtk-2.0/gdk-pixbuf.loaders: nonexistent directory > //usr/lib/opkg/info/hicolor-icon-theme.postinst: line 7: > gdk-pixbuf-query-loaders: not found > //usr/lib/opkg/info/hicolor-icon-theme.postinst: line 13: > gtk-update-icon-cache: not found > Configuring policykit. > Configuring pulseaudio-server. > addgroup: pulse: group already in use > > Configuring netbase. > Adding system startup for /etc/init.d/networking. > Configuring angstrom-libc-fixup-hack. > Configuring libnss-mdns. > Configuring avahi-daemon. > Adding system startup for /etc/init.d/avahi-daemon. > Configuring avahi-autoipd. > Configuring libertas-cf-firmware. > Adding system startup for /etc/init.d/cf8385. > Configuring sudo. > Configuring angstrom-zeroconf-audio. > Configuring ntp. > Adding system startup for /etc/init.d/ntpd. > Configuring shadow. > update-alternatives: Linking //usr/bin/passwd to passwd.shadow > update-alternatives: Linking //usr/sbin/chpasswd to chpasswd.shadow > update-alternatives: Linking //usr/bin/chfn to chfn.shadow > update-alternatives: Linking //usr/bin/newgrp to newgrp.shadow > update-alternatives: Linking //usr/bin/chsh to chsh.shadow > update-alternatives: Linking //bin/login to login.shadow > update-alternatives: Error: not linking //sbin/vipw to vipw.shadow since > //sbin/vipw exists and is not a link > update-alternatives: Linking //sbin/vigr to vigr.shadow > Configuring ifupdown. > Adding system startup for /etc/init.d/ifup. > Configuring ntpdate. > adding crontab > Bluetooth: Core ver 2.15 > NET: Registered protocol family 31 > Bluetooth: HCI device and connection manager initialized > Bluetooth: HCI socket layer initialized > Bluetooth: L2CAP ver 2.13 > Bluetooth: L2CAP socket layer initialized > Bluetooth: HIDP (Human Interface Emulation) ver 1.2 > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > pxa27x-ohci pxa27x-ohci: PXA27x OHCI > pxa27x-ohci pxa27x-ohci: new USB bus registered, assigned bus number 1 > pxa27x-ohci pxa27x-ohci: irq 3, io mem 0x4c000000 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 3 ports detected > usb 1-2: new full speed USB device using pxa27x-ohci and address 2 > Bluetooth: RFCOMM TTY layer initialized > Bluetooth: RFCOMM socket layer initialized > Bluetooth: RFCOMM ver 1.11 > smsc911x: Driver version 2008-10-21. > eth%d: smsc911x_init: Driver Parameters: > eth%d: smsc911x_init: LAN base: 0xC4A00000 > eth%d: smsc911x_init: IRQ: 163 > eth%d: smsc911x_init: PHY will be autodetected. > eth%d: smsc911x_init: BYTE_TEST: 0x00000000 > eth%d: smsc911x_init: BYTE_TEST: 0x00000000 > eth%d: smsc911x_init: top 16 bits equal to bottom 16 bits > eth%d: smsc911x_init: This may mean the chip is set for 32 bit while the bus > is reading 16 bit > usb 1-2: configuration #1 chosen from 1 choice > Collected errors: > * pkg_run_script: postinst script returned status 127. > * opkg_configure: hicolor-icon-theme.postinst returned 127. > INIT: Entering runlevel: 5 > Starting system message bus: dbus. > Starting Hardware abstraction layer hald > Starting ntpd: done > Starting PCSC Daemon: pcscd. > Starting syslogd/klogd: done > * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon > [ ok ] > Starting bonjour: > Starting i2c... > I2C: i2c-0: PXA I2C adapter > I2C: i2c-1: PXA I2C adapter > i2c /dev entries driver > * > > Thanks for you help! > Momday > |