From: Emilie T. <etr...@fl...> - 2010-01-21 14:49:37
|
Yes I did. That is what I did : set line /dev/ttyUSB0 set flow-control none set carrier-watch off set speed 115200 connect The led iluminates on the Overo COM but I have no boot messages. Mechatronix wrote: > > Hey Emilie, > > did you set "flow-control none" > and "carrier-watch off" > > Shane > > Emilie Trevisiol wrote: >> >> Hi, >> >> I have Overo Water and Tobi boards but I can't use it. >> I am connecting with a console but when I plug the Power, it doesn't >> start. The led on the Overo is on but I still have this message: >> >> Connecting to /dev/ttyUSB0, speed 115200 >> Escape character: Ctrl-\ (ASCII 28, FS): enabled >> Type the escape character followed by C to get back, >> or followed by ? to see other options. >> ---------------------------------------------------- >> >> All the Overo I have (Earth and Water) works fine with the Summit board. >> I tried with and without SD card. >> >> What's wrong? >> >> Thanks. >> >> Emilie >> >> > > ----- Emilie Trevisiol Fly-n-sense -- View this message in context: http://old.nabble.com/power-problem-with-Tobi-tp27254544p27258785.html Sent from the Gumstix mailing list archive at Nabble.com. |