From: zachlac <zla...@gm...> - 2010-01-08 22:14:10
|
I seem to have discovered the problem when sifting through boot-up messages: > usb 1-1: New USB device found, idVendor=0403, idProduct=6011 > usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 > usb 1-1: Product: USB-COM232 Plus4 > usb 1-1: Manufacturer: FTDI > usb 1-1: SerialNumber: FTSKY3MH > usb 1-1: rejected 1 configuration due to insufficient available bus power > usb 1-1: no configuration chosen from 1 choice Hopefully the hub will fix this problem. Benny B. Simonsen wrote: > > I use the OTG port with a HUB and it works with hot plug. > I have "cheated" a bit and have soldered to pins together on the USB OTG > connector (to force host mode all the time). If you just leave the OTG > cable in the Tobi board it should give the same result (I just couldn't > find an OTG cable) > > Regarding dmesg you will only see units which is connected at boot time. > Messages after boot is directed to the console (in the default console > image I use at the moment) > > Benny > -- View this message in context: http://old.nabble.com/USB-OTG-not-working-as-host-tp27066693p27083129.html Sent from the Gumstix mailing list archive at Nabble.com. |