From: <mar...@go...> - 2009-02-11 12:37:05
|
On Wed, 11 Feb 2009 11:10:10 +0200, "Demetris Zavorotnichenko" <fgc...@cy...> wrote: > "How large is it and how many Grams does it weight?" > > I'ts modular. You have the Sensor PCB separate so that you can mount it > anywhere, you have your Gumstix board that has all the power supplies, you > have your SERVO & Sensor board for ....well sensors and servos, You have > your ....... and the list continues. :) > > All these PCB's are all the same size 120mm x 55mm (except for the Sensor > board which is smaller) and can fit in an enclosure (but not necessarily > since most UAV systems just mount without enclosures to save weight.) I remember the Verdex having 80x20. I'll have to meassure but I think you board may be too wide for my airframe. Also I already have the GPSstix and the netWifiMicroSD-EU connected to have networking and GPS. Can your server&sensor-board replace any of these to free up the apropriate slot? You forgot to mention height and weight. Do you supply kernel-modules for the ADC-channels on your sensor-board? What sensors and free adc-channels are there? Also the Gumstix-Board does not have al the power-supplies. You have to feed it regulated 5V whereas your n-cell LiPo requires an active power-regulator to provide that (passive would be a bad idea here). Marcus |