From: Joshua J B. <jbialk@MIT.EDU> - 2008-05-28 12:30:34
|
Thanks Dave, that is very helpful. I'll be sure to get a console board, cable, and the spacers kit as well. Dave Hylands wrote: > Hi Josh, > > >> I was planning to buy a verdex along with a robostix and netmmicrosd >> (fcc version... I'm in the US) and I wanted to make sure there weren't >> any other accessories I needed to buy to get the three of them to work >> together. If anyone has interfaced a verdex with either or both of these >> two boards and needed any additional equipment, please let me know what >> I need to buy. >> > > I highly recommend getting one of the console boards and a null-modem > serial cable. > > I also highly recommend getting the screws and spacers kit. > > The latest builds that are shipped with the verdex will give gibberish > on the console with the robostix. Using a console will allow the > kernel to be reimaged. > See this page: > <http://docswiki.gumstix.com/Robostix_framebuffer> > for some more information. > > The technique for setting up the robostix for OE is a little > different. It should be in the archives.... > > -- Joshua J Bialkowski Graduate Student Department of Aeronautics and Astronautics Massachusetts Institute of Technology |