From: Daniel S. <de...@pm...> - 2008-05-27 03:26:39
|
Hi 'mark, Thanks for your help. I don't know what the philosophy of the whole Gumstix thing is (other than let the users groups be the tech support) but I guess it keeps it cheap. I had a fear that some board combos might not work. Thank goodness for all of you folks who help out, especially those that go to the trouble of posting photos and such (e.g. Dave). Above and beyond... Dan At 01:40 PM 5/26/2008, you wrote: >Hi Daniel, > >hope you got it figured out. Yes, agreed, from my own HW days, many >moons ago, using both keyed connectors and pin 1 indicators went a long >way to prevent painful and time consuming problems. It doesn't cost >much to do a little extra silk screening either. The docs could be >better too. I just feel like am back in the days of the IMSAI >computers. Fortunately some folks like Dave and a few others have >posted their own pix of the projects which are quite helpful. > >Be warned that there are combinations of boards which just don't fit >together. Its best to post a note to the mail list board and ask first. > >Have fun and let us know what you learn. > >'mark > > >Daniel Sampson wrote: > > Hi Mark, > > > > Thanks for the suggestion. It sounds like there isn't any unambiguous > > source for this info. In my experience making PC boards, the labeling > > of the part always is next to pin 1. However, Gumstix doesn't seem to > > always follow this protocol. I haven't really found the images to > > fully clarify the situation. I may be able to piece it together. > > > > Thanks again, > > > > Dan > > > > At 06:56 PM 5/24/2008, you wrote: > > > >> Hi, > >> > >> best way I can tell you is to look at images of the boards on the web > >> site. Look carefully at the orientations of each and that > should help you. > >> > >> 'mark > >> > >> Daniel Sampson wrote: > >> > >>> Hi, > >>> > >>> I am new to Gumstix, and I just purchased a connex 400m, a > >>> console-hw, and a netCF, and I am trying to figure out the > >>> orientation of the 60-pin Hirose and 92 pin bus connectors. I can't > >>> seem to find anything that clearly spells it out on the web site. I > >>> even looked at the Eagle board layouts, and it isn't always clear. Is > >>> there an unambiguous source of info for such things somewhere? Or can > >>> someone share an easy way to tell? What happens if they are connected > >>> the wrong way, will anything be damaged? > >>> > >>> It baffles me when connectors are not keyed or indexed to go in > >>> > >> only one way. > >> > >>> Tx, > >>> > >>> Dan > >>> > >>> > >>> > >>> ------------------------------------------------------------------------- > >>> This SF.net email is sponsored by: Microsoft > >>> Defy all challenges. Microsoft(R) Visual Studio 2008. > >>> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > >>> _______________________________________________ > >>> gumstix-users mailing list > >>> gum...@li... > >>> https://lists.sourceforge.net/lists/listinfo/gumstix-users > >>> > >>> > >>> > >> ------------------------------------------------------------------------- > >> This SF.net email is sponsored by: Microsoft > >> Defy all challenges. Microsoft(R) Visual Studio 2008. > >> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > >> _______________________________________________ > >> gumstix-users mailing list > >> gum...@li... > >> https://lists.sourceforge.net/lists/listinfo/gumstix-users > >> > > > > > > ------------------------------------------------------------------------- > > This SF.net email is sponsored by: Microsoft > > Defy all challenges. Microsoft(R) Visual Studio 2008. > > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > > _______________________________________________ > > gumstix-users mailing list > > gum...@li... > > https://lists.sourceforge.net/lists/listinfo/gumstix-users > > > > > > >------------------------------------------------------------------------- >This SF.net email is sponsored by: Microsoft >Defy all challenges. Microsoft(R) Visual Studio 2008. >http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ >_______________________________________________ >gumstix-users mailing list >gum...@li... >https://lists.sourceforge.net/lists/listinfo/gumstix-users |