From: RobbyD <rd...@br...> - 2008-01-28 18:05:36
|
Hi all, I'm using a Verdex XL6P + a netwifimicro-SD expansion card. I tried reflashing over SSH using the tutorial at http://docwiki.gumstix.org/Replacing_the_filesystem_image This was to enable JamVM to be included. When I ran: # echo && flashcp -v /tmp/rootfs.arm_nofpu.jffs2 /dev/mtd1 && flashcp /tmp/uImage /dev/mtd2 && echo > /dev/watchdog It said 5% into the verification stage, that the verification was not correct. I tried this a couple of times however then my SSH connection died. I did NOT execute the following two lines: # flash_unlock /dev/mtd0 # flashcp -v /tmp/u-boot.bin /dev/mtd0 therefore I assume my uBoot is still intact. I cannot now SSH into the board again. What is the best move now? I do have a tweener. Many thanks, RobbyD -- View this message in context: http://www.nabble.com/Verdex-XL6P-Reflash---Verification-error-tp15139737p15139737.html Sent from the Gumstix mailing list archive at Nabble.com. |