From: Terry K. <kl...@kl...> - 2008-01-15 02:43:01
|
Note: this is on an initramfs switch_root. I could try a standard build image to flash - but I shouldn't need to. It was working on the Verdex - before you had the issues with the Connex I saw in another thread. Previously in this thread there is a full bootlog with everything OK. Now I get... cfio: module license 'unspecified' taints kernel. Before register driver After register driver Error for wireless request "Set ESSID" (8B1A) : SET failed on device wlan0 ; No such device. Error for wireless request "Set Mode" (8B06) : SET failed on device wlan0 ; No such device. SIOCGIFFLAGS: No such device wlan0 No such device heres /etc/modules... ------------------------------------------------------- ### This file is automatically generated by update-modules" # # Please do not edit this file directly. If you want to change or add # anything please take a look at the files in /etc/modutils and read # the manpage for update-modules. # ### update-modules: start processing /etc/modutils/ethernet ethernet ### update-modules: end processing /etc/modutils/ethernet ### update-modules: start processing /etc/modutils/evdev evdev ### update-modules: end processing /etc/modutils/evdev ### update-modules: start processing /etc/modutils/hidp hidp ### update-modules: end processing /etc/modutils/hidp ### update-modules: start processing /etc/modutils/mmc_block mmc_block ### update-modules: end processing /etc/modutils/mmc_block ### update-modules: start processing /etc/modutils/ohci-hcd ohci-hcd ### update-modules: end processing /etc/modutils/ohci-hcd ### update-modules: start processing /etc/modutils/pcmcia pcmcia ### update-modules: end processing /etc/modutils/pcmcia ### update-modules: start processing /etc/modutils/proc_gpio proc_gpio ### update-modules: end processing /etc/modutils/proc_gpio ### update-modules: start processing /etc/modutils/pxamci pxamci ### update-modules: end processing /etc/modutils/pxamci ### update-modules: start processing /etc/modutils/rfcomm rfcomm ### update-modules: end processing /etc/modutils/rfcomm ### update-modules: start processing /etc/modutils/smc911x smc911x ### update-modules: end processing /etc/modutils/smc911x ### update-modules: start processing /etc/modutils/tsc2003 tsc2003 ### update-modules: end processing /etc/modutils/tsc2003 ------------------------------------------------------ and root@gumstix-custom-verdex:/etc$ lsmod Module Size Used by i2c_dev 5828 0 i2c_pxa 6912 0 mcf25 195600 0 cfio 4928 1 mcf25 nls_iso8859_1 3808 1 nls_cp437 5472 1 vfat 9824 1 fat 45532 1 vfat nls_base 6336 4 nls_iso8859_1,nls_cp437,vfat,fat tsc2003 7408 0 i2c_core 16816 3 i2c_dev,i2c_pxa,tsc2003 rfcomm 34428 0 proc_gpio 9348 0 pcmcia 24968 1 cfio pcmcia_core 30416 3 mcf25,cfio,pcmcia firmware_class 7328 1 pcmcia ohci_hcd 19556 0 usbcore 112764 2 ohci_hcd hidp 14656 0 hid 26272 1 hidp l2cap 18596 4 rfcomm,hidp bluetooth 46688 3 rfcomm,hidp,l2cap gumstix_bluetooth 1312 1 bluetooth evdev 7872 0 smc911x 18753 0 mii 4704 1 smc911x gumstix_smc911x 2720 1 smc911x pxamci 6176 0 mmc_block 6504 3 mmc_core 21780 2 pxamci,mmc_block Terry On Mon, 2008-01-14 at 18:28 -0800, Steve Sakoman wrote: > Wifi should be working in 129 > > If you are still having issues, could you send me a copy of your /etc/modules > > Steve > > On Jan 14, 2008 6:20 PM, Terry Kemp <kl...@kl...> wrote: > > > > On Mon, 2008-01-14 at 17:48 -0800, Steve Sakoman wrote: > > > Terry, > > > > > > Which revision are you working from? > > > > > > Steve > > > > > > > Revision: 129 > > > > > > > > > On Jan 14, 2008 5:31 PM, Terry Kemp <kl...@kl...> wrote: > > > > > > > > On Tue, 2008-01-15 at 14:26 +1300, Terry Kemp wrote: > > > > > Seems Steve has broken something on Verdex at the moment (connex wifi > > > > > probs?). > > > > > > > > > Arrrrgh. > > > > Kicks himself for being impatient! > > > > > > > > It was initializing - boots through OK now. > > > > WIFI is broken though, must be a module issue. > > > > > > > > > > > > T > > > > > > > > > > > > ------------------------------------------------------------------------- > > > > Check out the new SourceForge.net Marketplace. > > > > It's the best place to buy or sell services for > > > > just about anything Open Source. > > > > http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace > > > > _______________________________________________ > > > > gumstix-users mailing list > > > > gum...@li... > > > > https://lists.sourceforge.net/lists/listinfo/gumstix-users > > > > > > > > > > ------------------------------------------------------------------------- > > > Check out the new SourceForge.net Marketplace. > > > It's the best place to buy or sell services for > > > just about anything Open Source. > > > http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace > > > _______________________________________________ > > > gumstix-users mailing list > > > gum...@li... > > > https://lists.sourceforge.net/lists/listinfo/gumstix-users > > > > > > > > > > > > ------------------------------------------------------------------------- > > Check out the new SourceForge.net Marketplace. > > It's the best place to buy or sell services for > > just about anything Open Source. > > http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace > > _______________________________________________ > > gumstix-users mailing list > > gum...@li... > > https://lists.sourceforge.net/lists/listinfo/gumstix-users > > > > ------------------------------------------------------------------------- > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services for > just about anything Open Source. > http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > > |