From: Paul H. <pau...@qo...> - 2007-11-11 03:17:24
|
You might want to double check and make sure that flow control is off on your terminal program. It sounds as if your terminal program is flow off'd and therefore doesn't send (other than the first key). I don't know why this would vary between boards but it is simple to verify and worth double checking. Paul Holzworth >Hello, > >I am attempting to work with a Verdex board via a serial connector. >When I power on the Verdex, I see the boot messages (via Minicom >or Hyperterminal) and eventually it comes to the login prompt. >That's good. However at this point, anything I type is not recognized >by the Gumstix. Characters are not echoed and the Gumstix does not >print any further output to suggest it saw some input. > >Pretty much the same thing happens at the U-boot prompt. >If I press the space bar within the first two seconds of booting, >I get the U-boot prompt. So it did see that I pressed the space bar. >But anything further that I type is not recognized. > >In case it matters, this Verdex board is a replacement >(originally shipped Verdex didn't boot at all). > >Same hardware and software and procedure has the expected >result (input is recognized) with several other Verdex and >Connex boards. > >Thanks for any advice you might have. > >Robert Dodier > >-- >View this message in context: http://www.nabble.com/New-Verdex-boots%2C-serial-output-observed%2C-but-no-serial-input-tf4780286.html#a13675837 >Sent from the Gumstix mailing list archive at Nabble.com. > > >------------------------------------------------------------------------- >This SF.net email is sponsored by: Splunk Inc. >Still grepping through log files to find problems? Stop. >Now Search log events and configuration files using AJAX and a browser. >Download your FREE copy of Splunk now >> http://get.splunk.com/ >_______________________________________________ >gumstix-users mailing list >gum...@li... >https://lists.sourceforge.net/lists/listinfo/gumstix-users |