Re: [Gumstix-users] verdex-1533-wifi images failing to start kernel

[Felix D. <fe...@gm...>]

Hi Dave,

Thanks for the suggestion.

I reflashed the bootloader using both u-boot-911x.bin and u-boot.bin
(although I didn't reflash either the filesystem or kernel since
they're the same), with no luck.  Same failure during the boot
process.

Felix


On 11/2/07, Dave Hylands <dhy...@gm...> wrote:
> Hi Felix,
>
> > I was having issues with a buildroot I compiled myself (with the
> > netwifimicro patches), so I decided to try the verdex-1533-wifi build,
> > as others seemed to have good luck with it (and so I can check that the
> > hardware is working correctly).
> >
> > I loaded the following binaries on the verdex:
> > * bootloader: u-boot-911x-600MHz.bin
> > * FS: rootfs
> > * kernel: uImage
> >
> > Although the bootloader seems to work mostly correctly (dhcp still
> > seems to hang looking for boot/uImage after getting an ip address), I
> > cannot get the kernel started.  I've attached my boot log, but looking
> > at the reference boot.log, it seems to fail between 'CPLD responded
> > with: 00' and the usbcore initializations.
> >
> > Any ideas what could be wrong?
>
> I don't have a 600 MHz verdex to test stuff with. Perhaps you could
> try using the 400 MHz version of u-boot just to see if it gets past
> that.
>
> It's possible that there are some timing issues.
>
> Has anybody else used my prebuilt image successfully with a 600 MHz verdex?
>
> --
> Dave Hylands
> Vancouver, BC, Canada
> http://www.DaveHylands.com/
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Splunk Inc.
> Still grepping through log files to find problems?  Stop.
> Now Search log events and configuration files using AJAX and a browser.
> Download your FREE copy of Splunk now >> http://get.splunk.com/
> _______________________________________________
> gumstix-users mailing list
> gum...@li...
> https://lists.sourceforge.net/lists/listinfo/gumstix-users
>