From: Sean S. <ssc...@sa...> - 2007-07-27 14:21:32
|
Thanks Dave. >You would need to use the JTAG board: ><http://gumstix.com/store/catalog/product_info.php?products_id=188> >It needs a special startup script for the verdex (which Craig still >hasn't posted). Is there anything else I need to buy from Gumstix to use an Abatron BDI2000 with the JTAG-vx and the XL6P? Thanks again, Sean "Dave Hylands" <dhy...@gm...> Sent by: gum...@li... 07/27/2007 08:53 AM Please respond to "General mailing list for gumstix users." <gum...@li...> To "General mailing list for gumstix users." <gum...@li...> cc Subject Re: [Gumstix-users] verdex reflash gone bad... bricked? Hi Sean, > I've suceccessfully used the "Flashing over SSH/ethernet" instructions > from the wiki before yesterday, but this time I wound up with u-boot 1.1.4 > (instead of 1.2.0), which said it was built for 400MHz gumstix boards (not > my 600MHz XL6P), and it complained on trying to load the root filesystem. > Thinking r1197 might not have built right I tried the "factory flash > images" from sourceforge, with no change. I decided to go back to u-boot > 1.2.0 using the Uboot wiki page instructions. The "era 1:0-1" command gave > me lots of flash erase errors, and at the end of the process bootm > a2000000 failed again. Discouraged, I gave up for yesterday. If you even partially erased u-boot and didn't replace it successfully, then yes you bricked it. > Today I do not even get a serial console from u-boot. > > Does anyone have any suggestions on where to go from here? I have access > to an Abatron BDI2000 JTAG debugger, but I don't see where to add a JTAG > header. You would need to use the JTAG board: <http://gumstix.com/store/catalog/product_info.php?products_id=188> It needs a special startup script for the verdex (which Craig still hasn't posted). -- Dave Hylands Vancouver, BC, Canada http://www.DaveHylands.com/ ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ gumstix-users mailing list gum...@li... https://lists.sourceforge.net/lists/listinfo/gumstix-users |