From: David T. <to...@vi...> - 2007-05-03 22:00:36
|
Dave Hylands wrote: >Hi David, > >On 4/26/07, David Topper <to...@vi...> wrote: > > >>I had thought I'd be able to simply plug in my connex400, robaudiostix, >>tweener and wifistix ... and write / test code via the terminal window. >>But it looks like I'm wrong. Is the technique as follows: >> >>1. Configure connex + peripherials via tweener + serial >>2. Then ssh / scp files to the board? >> >> > >That works. You can zmodem to transfer them over the serial port. If >you have a net card you can ssh/wget them over the network. If you >have an MMC or CF card you can transfer them via that method. > > Hmm ... well I got the Connex 400xm board. Doesn't have CF ... not sure if it has MMC. Regardless, when I try to transfer a simple "hello world" program via Zmodem (using Zterm on OS X) I get the following error from my gumstix board: -sh: uz: not found So how can I transfer files back and forth? The only boards I have are: - Connex 400xm - Tweener - Robaudiostix - Wifi-stix I guess I need to configure the wifi-stix. But still, it's a bit scary not being able to have a "hard wired" connection. Thanks, DT |