Re: [Gumstix-users] gumstix-users Digest, Vol 6, Issue 100 message 4 segmentation fault

[<in...@ad...>]

Hi Dave.

The change in 'bootargs' worked and I can now boot the basxi400 and I can run my hello
and spi program. However I still cannot access the board through 'Bonjour'. As you can 
see below 'Rendezvous' is started. Windows try to get an ip address but than gives up 
with no connection and 'Bonjour' doesn't show any device. In the windows device manager 
I can see that the Linux gadget is loaded or unloaded when I plug/unplug the usb cable.

Thanks,

Rock.

=================================================================================>
starting network...
udhcpc (v0.9.9-pre) started
Dec 31 18:30:57 udhcpc[172]: udhcpc (v0.9.9-pre) started
pxa2xx_udc: version 4-May-2005
usb0: Ethernet Gadget, version: May Day 2005
usb0: using pxa2xx_udc, OUT ep2out-bulk IN ep1in-bulk STATUS ep6in-bulk
usb0: MAC 22:bc:fa:e7:47:a1
usb0: HOST MAC 22:bc:fa:e7:47:a2
usb0: RNDIS ready
Nothing to flush.
NET: Registered protocol family 17
udhcpc (v0.9.9-pre) started
Dec 31 18:30:58 udhcpc[204]: udhcpc (v0.9.9-pre) started
smc91x: not found (-19).
m
Dec 31 18:30:58 udhcpc[204]: [truncated] m
Starting Rendezvous:
Will output 768 bit dss secret key to '/etc/dropbear/dropbear_dss_host_key'
Generating key, this may take a while...
Public key portion is:
ssh-dss AAAAB3NzaC1kc3MAAABhAN2lSqh47Nm4lskOHmA5ULhv/Q9DJlRzNXtB1CmJyWVmi2jIO1T4
Me6DTssSTS/r/KMo0s0UTrhWCRYJripdBWOots1xsvtU6SDkV9Zv2bQlwCKdhCTbIoCo/G7Re8z9iQAA
ABUAm7gDkEcjS5n5BjctgRE2dnJVDW0AAABgK1fMFW/55W0EH4z+6iHH8qLmA/czofxIFoccco4iwRqs
kQgi76qc3xAOU7BZqqVQHAwpEjSMfseDinyX63PbfTh975qY38bPC/PEZ2qgYxg/Io5ghUMeXqZ6I8xG
M75XAAAAYQCp8fFo8J12oA2eyPW8FjyggzNjkyIzXs31llKlEXx1QItcEadxM92RK4m9RDhNF3SIkQ39
zaVK7oY5Q1oqxpDqeTfbluV0kRZbJNVzvzTjhib+X8SmQVvlqJNXE0PEWVE=
Fingerprint: md5 e2:8f:93:c9:c7:ea:1a:5c:c7:28:a2:27:b7:7b:bc:32
Will output 768 bit rsa secret key to '/etc/dropbear/dropbear_rsa_host_key'
Generating key, this may take a while...
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAAAYwCSndbsoRtfjIgpL256+LDm+KPe7vQkEYTJE1Q0uwLK
PIr58xaIbpRYA/K9m1bJb34Pz5QR9kyU9u6oP41F6yU5Q5moxSGoYGlmMY3YpOeU6hCsm4qLrLcF1DYV
K1m7l77mDQ==
Fingerprint: md5 bc:8b:a8:c4:a1:fd:90:92:38:c5:d2:11:f4:78:0d:cc
Starting dropbear sshd: OK
Starting httpd...



Welcome to the Gumstix Linux Distribution!

gumstix login: root
Password:
Welcome to Gumstix

=================================================

> Message: 4
> Date: Sun, 15 Oct 2006 23:17:38 -0700
> From: "Dave Hylands" <dhy...@gm...>
> Subject: Re: [Gumstix-users] c
> To: "General mailing list for gumstix users."
> 	<gum...@li...>
> Message-ID:
> 	<c32...@ma...>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
> 
> Hi Rock,
> 
> > I did reflash the basix with rootfs.1088.mmc you build for me a while ago.
> > After boot from u-boot (1.1.2) I get a bunch of errors and a kernel panic.
> 
> These errors:
> > Unknown node type: 2006 len 6072 offset 0x7e848/ Unknown node type: 2006 len 6072 offset 0x9e848
> 
> are normal with an older u-boot.
> 
> Your kernel command line:
> > Kernel command line: console=ttyS0,115200n8 root=1f02 rootfstype=jffs2 reboot=cold,hard
> 
> is fine for the 773 and earlier kernels, but needs to have root=1f02
> changed to root=1f01 in u-boot.
> 
> -- 
> Dave Hylands
> Vancouver, BC, Canada
> http://www.DaveHylands.com/
> 
> 
>