Re: [Gumstix-users] netstix 200xm-cf

[Dave H. <dhy...@gm...>]

Hi Steve,

> have purchased/received a netstix 200xm-cf. nice device.  but have
> (maybe dumb) question:  hoe do you mount, get access to, the cf?
> checked out docs but lots of refer to mmc and how to mount.  help.

With a recent buildroot (i.e. I just tested this morning with 1132)
all you need is:

mkdir /mnt/cf    # Note this is a one time operation
mount -t vfat /dev/hda1 /mnt/cf

If you have an older buildroot, you might also need to do:

modprobe ide-disk

before doing the above.

You should also check in the /etc/modules file and see that mmc_block
and pxamci lines are commented out and that the pcmcia line is not
commented. If yo umake any changes, you'll need to reboot.

-- 
Dave Hylands
Vancouver, BC, Canada
http://www.DaveHylands.com/