From: <And...@no...> - 2006-09-24 23:27:17
|
Bad news :-( ... I compiled the default 1092 (make defconfig - make), and still showing the same message: =20 Error for wireless request "Set ESSID" (8B1A) : SET failed on device mwlan0 ; No such device. =20 It seems to be really defective. =20 Regards, Gava =20 ________________________________ From: gum...@li... [mailto:gum...@li...] On Behalf Of ext Steve Sakoman Sent: Sunday, September 24, 2006 18:51 To: General mailing list for gumstix users. Subject: Re: [Gumstix-users] Wifistix not working in 1093? =20 Andre, I recommend that you revert to build 1092 -- this worked for me. If that doesn't work then you may indeed have a bad part. The command for checking out version 1092 is: svn co -r1092 http://svn.gumstix.com/gumstix-buildroot/trunk gumstix-buildroot Good luck! Steve On 9/24/06, And...@no... <And...@no...> wrote: Thanks for your tip Dave, I just tried your build 1088 from http://davehylands.com/gumstix-wiki/rootfs/ I loaded the file rootfs.1088.cf and the WIFISTIX still not working. Apparently the cfio and mfc25 modules are loaded: # lsmod Module Size Used by mcf25 199624 0 cfio 5088 1 mcf25=20 proc_gpio 7320 0 gumstix_bluetooth 1440 0 pxa2xx_cs 3076 3 pxa2xx_core 10208 1 pxa2xx_cs pcmcia 23656 1 cfio pcmcia_core 30384 4 mcf25,cfio,pxa2xx_core,pcmcia=20 firmware_class 7968 1 pcmcia unix 22100 8 # But I'm still getting this message during boot: cfio: module license 'unspecified' taints kernel. Before register driver After register driver Error for wireless request "Set ESSID" (8B1A) : SET failed on device mwlan0 ; No such device. Is there any other trick to put WIFISTIX to work or it's time to think that I was lucky, receiving a defective device?=20 BR, Gava -----Original Message----- From: gum...@li... [mailto: gum...@li... <mailto:gum...@li...> ] On Behalf Of ext Dave Hylands Sent: Sunday, September 24, 2006 18:29 To: General mailing list for gumstix users. Subject: Re: [Gumstix-users] Wifistix not working in 1093?=20 Hi Andre, > I got my WIFISTIX this weekend, and I found the same problem. I had the same > message during boot, I found that the CF/WIFI modules still in the 2.6.17 > kernel, so I decided to load the firmware 3.0-r1078 from sf.net, the same > thing happened; I loaded the 3.0-r1066 and again the same message: The problem is that the kernel won't load modules that are compiled for a different version.=20 So with a 2.6.18 kernel, you need modules compiled for 2.6.18. The cfio.ko files currently in SVN will only work on a 2.6.17 kernel. The simplest thing is to back down to release 1092 until Craig puts up=20 some newer versions of cfio.ko -- Dave Hylands Vancouver, BC, Canada http://www.DaveHylands.com/ ------------------------------------------------------------------------ - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys -- and earn cash=20 http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=3D= DEVDE V _______________________________________________=20 gumstix-users mailing list gum...@li... https://lists.sourceforge.net/lists/listinfo/gumstix-users=20 ------------------------------------------------------------------------ - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=3D= DEVDE V=20 _______________________________________________ gumstix-users mailing list gum...@li... https://lists.sourceforge.net/lists/listinfo/gumstix-users =20 |