From: Dave H. <dhy...@gm...> - 2006-06-18 02:54:14
|
Hi Marc, > I just got a Breakout-GS and notice that FB2 is populated with an SMD > component which looks like a resistor to my untrained eyes. Is it indeed a > resister that needs to be replaced with a ferrite bear, or do GS's have a > ferrite bead by default now? The FB is supposed to be a ferrite bead. If it's present, then you can power the breakout-GS from USB. You can tell the difference by the following: 1 - The ferrite beads tend to be square in cross section. The resistors tend to fairly flat in comparison. 2 - The resistors have their resistor code written on them as a 3 digit number. You'll see a couple with 103 (10K) and 203 (20K). The ferrite beads have no writing on them. As to whether they're shipped with them by default or not, somebody from gumstix would need to comment. -- Dave Hylands Vancouver, BC, Canada http://www.DaveHylands.com/ |